Touring - My computer stopped working

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
carkmouch
05-19-08, 08:19 PM
I noticed today that my Cateye Enduro 8 computer didn't activate when I started rolling. I pressed the main button on it, and it turned on, yet when I started to move it remained at 0.00 mph on the speedometer.
Is this somehow fixable, or is my computer shot? It came with the lightly-used LHT I got off Craigslist a few months ago.
Bacchusbill
05-19-08, 08:30 PM
First, since you don't really know the history of it, change the battery. That usually will get it back to normal. I have several of these, and when I know the battery's fresh, I double check to make sure that neither the magnet nor sensor have slipped, and then I slip it out of the harness, wipe the connections and slide it back in. This will usually take care of any minor issues.
GeorgeBaby
05-19-08, 08:35 PM
Oops, I didn't see that the first reply mentioned the magnet/sensor -- that's my guess
First, since you don't really know the history of it, change the battery. That usually will get it back to normal. I have several of these, and when I know the battery's fresh, I double check to make sure that neither the magnet nor sensor have slipped, and then I slip it out of the harness, wipe the connections and slide it back in. This will usually take care of any minor issues.
Excellent advice! BTW, my money is on a misaligned magnet.
... Brad
When was the last time you changed the battery?
Excellent advice! BTW, my money is on a misaligned magnet.
... Brad
+1
or too far away from receptor
but if you bought it second hand, used. then it would not hurt to change batteries and reset everything, make sure the wheel size is correct etc
george
jpmartineau
05-20-08, 10:03 AM
I noticed today that my Cateye Enduro 8 computer didn't activate when I started rolling. I pressed the main button on it, and it turned on, yet when I started to move it remained at 0.00 mph on the speedometer.
Is this somehow fixable, or is my computer shot? It came with the lightly-used LHT I got off Craigslist a few months ago.
Can be:
- Misaligned magnet (probably that as everyone pointed out)
- Damaged wire
- Bad electric connection in the cradle
- Battery
If the display still has good contrast, your battery is ok because that's what'll give out first.
carkmouch
05-21-08, 06:41 PM
Thanks for the help, I managed to fix the problem. It turned out to be a misaligned magnet much to my relief, now that my computer is online again. It probably got that way from being stuffed in and out of a car last weekend.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.