Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.dexter88
05-28-08, 08:23 PM
Hey guys,
I got a Marazocchi Dirt Jam Pro Suspension's, and im fairly pleased with them,
Other then i think something is broken inside it, or came off, or im not quite sure,
So when im going for a Bunny Hop, or a Wheely, or just pull my front wheel up, it makes a sound, and its quit loud, i dont particulary need to listen, i can generally hear it, and it doesnt sound so healty.
Basicly, did anyone ever expirienced this problem before?
If not anyone know what this could be ?
What i think is, the bit inside the suspension, what stops it fall apart, at the top when i pull up, i think thats warn out.. and the rubber bit on it is came off.. the too metal hits and makes a "clunk".
Is this even possible ?
Also i brought these "Spin Doctor Solid Rear Axle (Nutted)" - M10x135mmx185mm, If you've seen them before, or take a look at them :
http://www.ison-distribution.com/ison/image/thumbs/huha-sd-m10axlekit.jpg
One side is slightly thicker at the miggle then the other side, Just want to make sure, wich way does this go into the hub ? I got Freewheel Cog, not Casset if that makes a difference :)
Any help would be apprichiated.
Cheers
~dexter
I got a Marazocchi Dirt Jam Pro Suspension's, and im fairly pleased with them,
Other then i think something is broken inside it, or came off, or im not quite sure,
So when im going for a Bunny Hop, or a Wheely, or just pull my front wheel up, it makes a sound, and its quit loud, i dont particulary need to listen, i can generally hear it, and it doesnt sound so healty.
Basicly, did anyone ever expirienced this problem before?
If not anyone know what this could be ?
What i think is, the bit inside the suspension, what stops it fall apart, at the top when i pull up, i think thats warn out.. and the rubber bit on it is came off.. the too metal hits and makes a "clunk".
Is this even possible ?
Also i brought these "Spin Doctor Solid Rear Axle (Nutted)" - M10x135mmx185mm, If you've seen them before, or take a look at them :
http://www.ison-distribution.com/ison/image/thumbs/huha-sd-m10axlekit.jpg
One side is slightly thicker at the miggle then the other side, Just want to make sure, wich way does this go into the hub ? I got Freewheel Cog, not Casset if that makes a difference :)
Any help would be apprichiated.
Cheers
~dexter