Cyclocross - 2005 Poprad crank replacement

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




View Full Version : 2005 Poprad crank replacement


dcdomain
06-10-08, 11:05 PM
Hello all, noob here trying to figure out what my options are to replace a stripped crank arm. I was riding the Poprad over to my brother's place (giving him the bike) when the left pedal fell off. Realized then that I had stripped the crank arm from repeatedly swapping out the pedals incorrectly.

From the specs (http://www.lemondbikes.com/bike_archive/2005/classics/poprad.php), looks like I'll need to get an ISIS crank arm. Couldn't find any place that sells just one arm (makes sense), so I took a look at Nashbar and it returned a couple of results.

Will I have any issues with these two cranksets?

Truvativ Elita Isis Cyclocross Crankset (http://www.nashbar.com/profile.cfm?category=&subcategory=&brand=&sku=19047&storetype=&estoreid=&pagename=Show%20All%20Products)
Truvativ Elita ISIS Road Crankset – Black/Silver Rings (http://www.nashbar.com/profile.cfm?category=&subcategory=&brand=&sku=19119&storetype=&estoreid=&pagename=Show%20All%20Products)

Thanks!


KeatonR
06-15-08, 05:06 PM
You shouldn't have any problems with either. ISIS crankarms fit onto an ISIS bottom bracket.