Bicycle Mechanics - anybody knows this?...
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
06-15-08, 10:19 PM
im looking for a FD clamp thing for a bike which have an ovalish seat tube, anybody knows where i can find a clamp for this?
dsm iv tr
06-16-08, 02:58 AM
I don't know where you can find one specifically like that offhand, but you might be able to make a regular old circular clamp work by shimming it with something. Rubber, perhaps.
06-16-08, 07:11 PM
already tryed with rubber and the problem is when just when trying to adjust the FD, I was thnking to get the little steel piece that goes welded in road frames or the one that use ribets... looks like thats the best solution.
06-17-08, 11:48 AM
Did the frame originally have a braze on fitting that was part of the frame?
Someone once had a similar problem. I suggested making an FD mounting bracket that would anchor to the water bottle bosses on both the downtube and the seat post tube. This would require access to a welder and someone who can use a welder.
I, myself, would try to avoid drilling holes in the frame.
06-17-08, 12:38 PM
One would think, frames with oval tubes, they'd include a FD peg. But NOOOOOoooooooo.
BTW, "TRIED" not TRYED. It's an everyday word, no reason to mispell it.
06-17-08, 12:41 PM
I'd check with the frame manufacturer.
06-17-08, 12:49 PM
E Type der?
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.