Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.heyman421
06-16-08, 11:00 AM
Just purchased this unit from the LBS yesterday.
After hours of fiddeling, a few re-adjustments, and replacing $15.00 worth of batteries (The batteries are $5 each!) I'm still having problems getting any readings to show up on the unit at all.
I've installed the speed sensor on both the front and rear wheels, with no difference.
I've tilted the sensors (both the cadence and speed sensors) as close to the magnets as possible, without them hitting, and there's nothing showing up on the display.
Both of the senders have little gray buttons. The cadence sensor has a light that blinks when you push the button, and the speed sensor has no light. I'm assuming that these are either a reset or a connection button, but the manual makes no mention of them, or how to use them.
Does anyone have any experience with any of the wireless serfas kits? Or any other similar wireless kits, and know what i have to do to get these to mate up with the display? I don't think it's a problem with the distance between the sensors and the magents, because i've moved the sensors as close as possible, and still nothing showed up. And all 3 batteries have been replaced, so it's not a power issue.
After hours of fiddeling, a few re-adjustments, and replacing $15.00 worth of batteries (The batteries are $5 each!) I'm still having problems getting any readings to show up on the unit at all.
I've installed the speed sensor on both the front and rear wheels, with no difference.
I've tilted the sensors (both the cadence and speed sensors) as close to the magnets as possible, without them hitting, and there's nothing showing up on the display.
Both of the senders have little gray buttons. The cadence sensor has a light that blinks when you push the button, and the speed sensor has no light. I'm assuming that these are either a reset or a connection button, but the manual makes no mention of them, or how to use them.
Does anyone have any experience with any of the wireless serfas kits? Or any other similar wireless kits, and know what i have to do to get these to mate up with the display? I don't think it's a problem with the distance between the sensors and the magents, because i've moved the sensors as close as possible, and still nothing showed up. And all 3 batteries have been replaced, so it's not a power issue.