i picked up a bunch of parts... but ive come to find out they are in bad shape rims have broken spokes/ dont spin well... Aparently the black frame is a WTP but i dont know what one... the bars are crusty and over sprayed... but i think i see an S&M decal on them im pretty sure they are slam bars... the forks i think are pitchfork lts... I think i got a decent hub and a 12t driver and maybe a oddy rim or 2 but only one is in good shape.
http://i28.photobucket.com/albums/c236/blindfoldedhope/DSCF5049.jpg
http://i28.photobucket.com/albums/c236/blindfoldedhope/DSCF5048.jpg
http://i28.photobucket.com/albums/c236/blindfoldedhope/DSCF5050.jpg
http://i28.photobucket.com/albums/c236/blindfoldedhope/DSCF5051.jpg
http://i28.photobucket.com/albums/c236/blindfoldedhope/DSCF5057.jpg
http://i28.photobucket.com/albums/c236/blindfoldedhope/DSCF5059.jpg
http://i28.photobucket.com/albums/c236/blindfoldedhope/DSCF5060.jpg

Oh yea and a brand new in package oddy slic cable which ive been meaning to buy... SO i guess that offsets the price $10 ill get some numbers off the frame... im wondering if it will be beter then my eastern element... or if i should just use the forks and bars on my element... repainted of course... then just fix the broken spokes on the Hazard rim???? it has a primo hub atleast.

whats the silver frame?

whats the silver frame?

haro its dented up and already in the trash pile

frame is the wtp bold.... kinda small for me and not full cromo ill try to sell it for $30 and make some of my $$$ back

Some of those parts don't look like they would normally be in someone's trash pile - like the Odyssey fork and rims. Ugly or not, some of that's good stuff. A "steal"!

Some of those parts don't look like they would normally be in someone's trash pile - like the Odyssey fork and rims. Ugly or not, some of that's good stuff. A "steal"!

Odyssey rim is bent all 3 of them actually... i delaced it and held it up to another rim i had... kinda pissed about it...the 3/8 primo hub still spins nicely though... the bars cleaned up nicely and i just sprayed them with some self etching primer and they are drying... the only problem is that the forks are a 3/8 and the rims that are on my eastern are the best rims i have and they are 14mm... so i might take an air grinder to them and open them up... but im not sure if the heat will distress the dropouts.

So basically for $50 and a 40min drive i ended up with:

Slam Bars.
Pitch Forks.
Brand new Slic Cable.
a Primo Hub
A demolition tire
WTP bold frame.
3 Sets of Welgo ped's in good shape
1 beat set of tenderisers
2 DK stems.


Think i can get $25 for that frame from someone

haro sprocket and some hazzardz.

haro sprocket and some hazzardz.

Hazz's are bent and trashed.... unless you can get rims fixxed.... haro sprokets are like pennys you find them under my couch cusions

true the hazzards and put that wheelset on your bike.

true the hazzards and put that wheelset on your bike.

Bent... im kinda pissed.... in like an oval like shape i think.... i can get this cheap


It is a federal division frame, volume forks, profile 3-piece cranks, animal sprocket, kink 3/8” chain, custom rear wheel with XS 4x4 Hub, 1” Dirty Harry bars, Snafu Stem, Sealed headset. Whole thing cost me $1200 to build and I’m asking 300 for it.

not bad, those hazzards look fixable but youd have to unlace them and re build them.

not bad, those hazzards look fixable but youd have to unlace them and re build them.

How do you go about fixxing them i unlaced them last night the sides arnt in bad shape its jsut a little ovaled or something

A friend of mine crashed on his mtb during a morning ride and bent(ovaled) a rim. He whipped out his tools and skillfully relaced them until his wheel was true and round then finished his ride! An emergency fix that worked well for his 29s. I think a stiffer 20" rim would need to be properly repaired before the wheel could be rebuilt.