Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.ed
07-06-08, 07:03 PM
Yo, so I jacked the Van back up to 130mm and decided to change the oil.
I made sure to cycle the damper several times to get the old oil completely out. The fork was PUSH'd last year. I referred to the Fox manual for oil levels:
155cc R. leg
30cc L. leg
When I got it all back together, I only had 4" of travel. I drained 10cc out of the damper side and the travel increased a little. I drained another 10cc out and I was back to full 130mm
I guess after a PUSH, you need to use 135cc in the right leg.
Odd
:geek:
I made sure to cycle the damper several times to get the old oil completely out. The fork was PUSH'd last year. I referred to the Fox manual for oil levels:
155cc R. leg
30cc L. leg
When I got it all back together, I only had 4" of travel. I drained 10cc out of the damper side and the travel increased a little. I drained another 10cc out and I was back to full 130mm
I guess after a PUSH, you need to use 135cc in the right leg.
Odd
:geek: