Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.boyinshirt
07-09-08, 02:45 PM
Hello everyone.
So i'll start this out by saying i'm a novice, and am working on my first fix up. I'm extremely stubborn and don't want to take this to a shop, especially because I want to keep the costs down for the friend I'm working on the bike for. (it's a lady I like, so the more brownie points, the better!)
So, the last thing needed on this bike is brakes. I went out and got new cables/housing, set it all up, and when it's all said and done, I pull on the levers, but they don't quite return... there seems to be enough tension in the lines as to where it should. The brakes work, but not to their full potential. I took the bike to a friend and he pointed out that I had purchased cables that are for cross bar levers and not drop bar levers. He knows more about fixed gear bikes (so he doesn't normally deal with us kids who need brakes) Could this be my main problem? If I swapped out the cables could that solve my problems?
What other problems could it be? I tried lubricating the cable and passing it through the housing in order to ease friction... I tried a different set of levers, but to no avail.
I just can't figure out why the levers won't return fully and why there isn't full braking power.
please help! this is getting so frustrating!
So i'll start this out by saying i'm a novice, and am working on my first fix up. I'm extremely stubborn and don't want to take this to a shop, especially because I want to keep the costs down for the friend I'm working on the bike for. (it's a lady I like, so the more brownie points, the better!)
So, the last thing needed on this bike is brakes. I went out and got new cables/housing, set it all up, and when it's all said and done, I pull on the levers, but they don't quite return... there seems to be enough tension in the lines as to where it should. The brakes work, but not to their full potential. I took the bike to a friend and he pointed out that I had purchased cables that are for cross bar levers and not drop bar levers. He knows more about fixed gear bikes (so he doesn't normally deal with us kids who need brakes) Could this be my main problem? If I swapped out the cables could that solve my problems?
What other problems could it be? I tried lubricating the cable and passing it through the housing in order to ease friction... I tried a different set of levers, but to no avail.
I just can't figure out why the levers won't return fully and why there isn't full braking power.
please help! this is getting so frustrating!