Bicycle Mechanics - Which Topeak Turbo Morph Bike Pump with Gauge?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
07-10-08, 11:22 AM
In reading which pump to get, I see many likes for this brand/model---however it also breaks down further in that they have several in this family of pumps.
I don't need super light weight for any reason, but do want a pump with me while riding and the questions I have for those that know are:
1. Is a gauge good to have or no big deal?
2. I need it to go to 110 lbs--is one certain one better than another in that regard?
3. I am thinking a hose is really nice thing to have to prevent breaking a stem--correct?
I guess what I am asking is "Can you pick out a pump for a casual rider"?
P.S. Where I live mail order is the only option, and feel free to chime in if I have forgotten anything.
07-10-08, 11:41 AM
I'm certainly no expert- but I have a Topeak Turbo Morph w/dial gauge & like it a lot. IMO, the dial is easier to read than the "slide in a window" types, plus it was just way too cool to pass up. Bonus: that dial gauge comes on a great pump!:D Factory claims up to 160 psi capacity- while that may be optimistic, it should certainly inflate up to 110 psi OK. It's about as close as you can come to a floor pump that's easy to clip on your bike frame. Yes, there are many other good pumps, but this is my favorite- love that dial gauge!:love:
How big a deal is a gauge? I think you should also get an accurate pencil or dial gauge(or borrow one), & then note any discrepancy between it & the pump gauge. Once you've found any difference(both my turbo morph, & my floor pump, measure right on with my Milton pencil gauge)just use the pump gauge to fill your tires, & save all that disconnecting, checking pressure with a separate gauge, reconnecting, checking again, etc. Short version- a pump gauge isn't absolutely necessary, but it sure is handy.:thumb:
Link to the Turbo Morph:http://www.topeak.com/products/Mini-Pumps/TurboMorphG
07-10-08, 12:21 PM
I've got the Road Morph. It's really great for a smaller pump. The sliding gauge isn't so smooth in that it kind of jumps in large intervals, but for getting to 110 or 120 it's fine. The pump is easy and fills to 120 quickly. Two other complaints, though: (1) there's a small clip for you to stand on while you pump, which doesn't clip back to the pump after a few uses on uneven ground (2) the pump holder is a bit big and zip-ties to your frame, and can interfere with brake cables or hit your leg as you pedal. But these are small downsides.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.