Singlespeed & Fixed Gear - spoke length help- paul hub deep v
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
i have 32 hole velocity deep v's and paul high flange hubs. i only need spokes. problem is paul doesnt have hub center to flange center on their specs, a stat i need for the spoke calc im using. if anyone has built these exact wheels (which i know lots of people have) can you please suggest a spoke length. i think i need 28-282 and i think ill go with wheelsmith double butted because quality has no black spokes left in the supposed right size. thanks.
07-22-08, 07:36 AM
i used 280's with no problems (i assume you are doing a 3x lacing)
my Paul hubs came with a sheet with (among other things) the flange width. it also states that the hubs are zero dish, so just divide that by 2 and you have the center-to-flange measurement... 65mm/2 = 32.5mm
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.