Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.John C. Ratliff
01-26-04, 10:55 PM
Bill said:
It's too bad I'm not rich. If I were, I'd get a custom framed bike, have the top tube welded shut at each end, and made air tight. I'd tap it with a valve and fill it with liquid CO2 to run a horn like this.
Actually, this is a very bad idea. The top welded tube could become very brittle, and fail. This could be a very expensive experiment, and if only the bike broke, you'd be lucky.
John
It's too bad I'm not rich. If I were, I'd get a custom framed bike, have the top tube welded shut at each end, and made air tight. I'd tap it with a valve and fill it with liquid CO2 to run a horn like this.
Actually, this is a very bad idea. The top welded tube could become very brittle, and fail. This could be a very expensive experiment, and if only the bike broke, you'd be lucky.
John