Bicycle Mechanics - Who makes a 123mm isis drive bottom bracket?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA
grinderbob
08-02-08, 09:08 PM
I have a 113mm, and it is 5mm short (drive side) to get the right chainline and clearance of the seatstay.
Most of the ISIS BB manufacturers only have 118mm, anyone has one with about 123mm spindle length?
thansk.

orangepaint
08-02-08, 09:26 PM
If you find a NDS BB cup that will fit inside a 68mm shell(I'm assuming you have a 68 because there are plenty of 123x73 ISIS BB's out there) you'll be fine. There just needs to no outer lip to the cup and it needs to be able to sit flush with the BB shell. I've done this with customer bikes at the shop I work at and I have yet to have any issues with it.
grinderbob
08-02-08, 09:40 PM
yes, it is a 68mm shell. on the drive side, I think I can use a 118mm and add a 2.5mm spacer, but not sure
how to do it on the non-drive side. (I'm talking about BB using cups, not flanges).

Soil_Sampler
08-03-08, 12:15 AM
http://www.ride-this.com/buy/FSA-Platinum-Pro-Megaquad-Isis-BB/20010003/