Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.wtandem
08-04-08, 09:10 PM
The tab on my 2000 XTR B tension assembly broke off. I had an older derailler with what looks to be an identical part, and removed it by pulling out the tab holding it to the mounting bolt. I also removed the tab on the broken one and do not seem to be able to get the correct orientation on re-assembly. It looks like I need to rotate it against the spring tension before inserting the tab washer to hold it in place. Is there some trick to this assembly. Does it need a special tool? I checked Shimano's WEB site but could not find any instructions.
Thanks for any suggestions.
Thanks for any suggestions.