Bicycle Mechanics - Cheap Work Stand
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
08-21-08, 12:33 PM
If you have more space than cash.
Made primarily of 3/4-inch black iron pipe and fittings. The connector is a short piece of aluminum seatpost bolted to a 3/4-inch black iron reducer fitting. Hang bikes vertically or horizontally. Hang two at the same time if you like. Costs about $10.
08-21-08, 12:48 PM
08-21-08, 12:54 PM
08-21-08, 06:59 PM
I use an old trailer-hitch mount bike rack I found. Just used the vertical arm with the two vinyl-covered support hooks.
The square-section tubing fit right over an old piece I had left over from a piece of exercise equipment I had pirated for some project; the result is a workable stand that takes down easily for storage.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.