Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.skinnyboy
08-25-08, 12:44 PM
I have disassembled the my speedplay zero. Instruction manual suggests heating the trox screw with a soldering iron
to loosen the locite. After cleaning/lubing, it spins pretty nicely (without this screw).
Now I'm ready to put them back together. However if I tighten the trox screw too much, it
binds and the pedal can't spin. If I don't tighten it, it has some play. So how should I approach this?
thanks.
to loosen the locite. After cleaning/lubing, it spins pretty nicely (without this screw).
Now I'm ready to put them back together. However if I tighten the trox screw too much, it
binds and the pedal can't spin. If I don't tighten it, it has some play. So how should I approach this?
thanks.