Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.liksmuzic
09-04-08, 08:43 PM
Some time ago, and after verifing with the dealer, I found that the front
fork is not suitable exactly for a hub motor. The cogging or pulsing the hub motor makes will resonate through the fork into the frame.
So, what are some of the forks that people are using?
Also with the fork off the bike, if I strike it, it will hum , well just like a tuning fork.
Does anyone know of ways to stop that effect.
Mine is an older slim steel version. I am trying to find a somewhat beefier type fork like the solid tube ones I see on newer mountain bikes.
Just wondering
fork is not suitable exactly for a hub motor. The cogging or pulsing the hub motor makes will resonate through the fork into the frame.
So, what are some of the forks that people are using?
Also with the fork off the bike, if I strike it, it will hum , well just like a tuning fork.
Does anyone know of ways to stop that effect.
Mine is an older slim steel version. I am trying to find a somewhat beefier type fork like the solid tube ones I see on newer mountain bikes.
Just wondering