Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.mconlonx
09-16-08, 09:25 AM
Working on another project and need some Mu specs. If it works out, I'll be buying one; if not, maybe not. Would also be interested in the same specs on a Curve. Specifically interested in IGH models, so 08 Mu XL, and Curve D3 would be optimal. Measurements do not have to be caliper/blueprint exact, readings off a tape measure would do.
What is the distance from the crank to the rear hub? Measured from center of BB spindle to rear hub axel. The Mu XL and Curve D3 have rear-facing, horizontal fork ends (aka "track dropouts") at the rear, yes? If so, length of those? Do the other models have vertical fork ends? If no-one's got info specifically on the XL, I'd also be interested in the same measurement from crank to axel on vert. fork end Mu.
Also, on the Mu (XL), what is the chainring spacing on the stock cranks? 110?
Thanks for any help you can offer!
What is the distance from the crank to the rear hub? Measured from center of BB spindle to rear hub axel. The Mu XL and Curve D3 have rear-facing, horizontal fork ends (aka "track dropouts") at the rear, yes? If so, length of those? Do the other models have vertical fork ends? If no-one's got info specifically on the XL, I'd also be interested in the same measurement from crank to axel on vert. fork end Mu.
Also, on the Mu (XL), what is the chainring spacing on the stock cranks? 110?
Thanks for any help you can offer!