Classic & Vintage - Lopsided Handlebars - Indicative of a Fall?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA
riomx
09-21-08, 05:58 PM
Today I went to go check out a beautiful 70s Motobecane Jubilee Sport. The frame was made from Columbus tubing and had Suntour components, and lightweight wheels. It was in excellent shape.

My wife and I rode it around and were determined to buy it. But I had a hunch and decided to look at the frame from the front. I straightened it out and noticed that the handlebars were lower on the right side (where the right arm holds when seated on the bike).

I feared that it may have taken a fall and that the frame may not be as straight as it seemed. We decided to walk, since the 78 Fuji Royale II that my wife bought last year also had the same telltale signs of a fall (lopsided handlebars, and when looking from the front, a fairly visible twist/lack of proper alignment in the frame).

Was I wrong to walk? Could there have been another reason for the handlebars being that way? Would it have been an easy fix?

I just hope I didn't make a mistake in letting it go :)

- Joe

spider-man
09-21-08, 06:04 PM
A new handlebar is (or can be, I should say) pretty cheap. Straightening a steel frame shouldn't cost too much either.

If everything else checks out OK, I would use the handlebar/alignment issue to bargain for a better price, then use the money saved to make the repair. This is assuming the price is reasonable in the first place.
unterhausen
09-21-08, 06:11 PM
As long as it went down on the side, the frame should be ok. My racing bike has a substantial scrape on the fork, and all of my brake levers have got road rash, but I don't think any of my frames have been bent. Handlebars are fairly easy to bend. If you liked the bike otherwise, that probably shouldn't have been a deal killer. For whatever reason, the frame-bending rear end collisions don't seem to affect the handlebars very often

mswantak
09-21-08, 06:46 PM
I've bought bikes before that had become garage clutter and had gotten squashed from the side, like from somebody pulling into the garage a bit too far.
riomx
09-21-08, 09:08 PM
Oh well. The guy had a phone call as I was checking out the bike, so I'm sure it's gone. At least now I know it's not a huge issue for future bike purchases.

Thanks for the info, as always.