Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.john87
09-24-08, 06:29 PM
Hello again, While I was searching the forum to see if anyone else had a similar problem as mine in my other post with their WE BL-36 I came across something which I thought was a mistake in the instructions. My instructions were changed and said to mount the hub with the wires in the right side of the bike sitting on it facing forwards. I did that and it turned the wrong directions so I turned it around and put the wires on the left. How do you tell the difference between an older bl-36 and the newer ones? I know the older ones had the wires on the left. My hub motor has AOTEMA written on both sides and has one 3 pin connector. From the pictures I have seen of the new hub there is no writing on them and there are two connectors the same black 3 pin as mine and a square white 3 pin molex connector. I'm wondering if my kit was made with an older motor and sold as a 2008. Thanks again from an ebike newbie:)