Dheorl
10-02-08, 07:09 PM
Just wondering, how hard is it to repaint a bike and how would I go about doing it?
General Cycling Discussion - Painting a bike
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Painting a bike
oldngray
10-02-08, 09:59 PM
I've seen lots of posts/responses over the years about how to paint a ****. Be it a bike, a car, a family room, whatever. It really comes down to three things; preparation, tools/materials and skill. I've seen people asking about how to get "professional results". If it is your first time painting *anything*, it is unlikely that you will achieve professional results even with the best tools and materials. Be realistic on your expectations relative to your experience.
For a bike, remove as many obstacles as you are mechanically comfortable with; wheels, brakes,handlebars, seat, chain, crank - as much as you can do. If you can even get down to removing the bearing races, that's even better. Take a lot of time preparing the surface. Get rid of any blemishes at a minimum, such as rust, chips- things that will show through a new paint job. Mask off anything you don't want to paint. I believe in priming before painting. There are always areas where you sand down through all of the paint and even where you don't, priming the whole works will make for a more uniform finish. Before you prime, follow the preparation instructions to remove any residue, such as dust, oil and grease. I like to use automotive grade primer that I can wet sand to make sure that I have a good, smooth base. For the paint I am now using, this requires a rub-down with mineral spirits before priming. Wherever I miss a blemish, I can re-sand and re-prime. Once I'm happy with the base coat, I top coat with the final finish. I wait a while (many days or a few weeks) before I try to reassemble the bike. The longer you let the finish cure, the less likely you are to damage it. I've done this for a few old, sort of classic bikes with positive results using Rustoleum or similar spray paint. If I am ever lucky enough to have something really special, I would leave the task to a professional.
So, if you are already comfortable with the disassembly and assembly of a bike, painting is not really that hard. I am now painting a 1965 Sears Spaceliner and am about to reassemble. It's taken me a few weeks of time in between a lot of other projects, but I'm not really focused on it and I'm in no hurry. I'm doing the same for an early 50's Western Flier for my wife - it needs a little more patience.
At the end of the day, unless you have something that should really be preserved in its original state, it's just metal and paint - you can always start over. Good luck!
For a bike, remove as many obstacles as you are mechanically comfortable with; wheels, brakes,handlebars, seat, chain, crank - as much as you can do. If you can even get down to removing the bearing races, that's even better. Take a lot of time preparing the surface. Get rid of any blemishes at a minimum, such as rust, chips- things that will show through a new paint job. Mask off anything you don't want to paint. I believe in priming before painting. There are always areas where you sand down through all of the paint and even where you don't, priming the whole works will make for a more uniform finish. Before you prime, follow the preparation instructions to remove any residue, such as dust, oil and grease. I like to use automotive grade primer that I can wet sand to make sure that I have a good, smooth base. For the paint I am now using, this requires a rub-down with mineral spirits before priming. Wherever I miss a blemish, I can re-sand and re-prime. Once I'm happy with the base coat, I top coat with the final finish. I wait a while (many days or a few weeks) before I try to reassemble the bike. The longer you let the finish cure, the less likely you are to damage it. I've done this for a few old, sort of classic bikes with positive results using Rustoleum or similar spray paint. If I am ever lucky enough to have something really special, I would leave the task to a professional.
So, if you are already comfortable with the disassembly and assembly of a bike, painting is not really that hard. I am now painting a 1965 Sears Spaceliner and am about to reassemble. It's taken me a few weeks of time in between a lot of other projects, but I'm not really focused on it and I'm in no hurry. I'm doing the same for an early 50's Western Flier for my wife - it needs a little more patience.
At the end of the day, unless you have something that should really be preserved in its original state, it's just metal and paint - you can always start over. Good luck!
switters
10-15-08, 05:43 PM
I'm interested in the answer to this question as well. I have my eye on a bike, and I love everything about it except the paint/logos. I don't want to get into painting it myself; what I'd like to know is who I could get to paint it for me. Would a local bike shop do this kind of thing?
BengeBoy
10-15-08, 05:49 PM
Short answer:
- You should be able to find a local powdercoating outfit in most cities that will powder coat a bike for $100 to $150 (that would include stripping).
- Plenty of shops/restoration folks will do a quality paint job for $400; much more for fancy jobs.
So:
- $50 bike, do it yourself
- Nice old bike you want to give a professional finish to, powdercoat
- Collectible/valuable/important bike - professional paint
- You should be able to find a local powdercoating outfit in most cities that will powder coat a bike for $100 to $150 (that would include stripping).
- Plenty of shops/restoration folks will do a quality paint job for $400; much more for fancy jobs.
So:
- $50 bike, do it yourself
- Nice old bike you want to give a professional finish to, powdercoat
- Collectible/valuable/important bike - professional paint
switters
10-15-08, 05:52 PM
Thanks BengeBoy. What exactly does powdercoating look like? I think I might have seen some powdercoated bikes around here... do they have kind of a "matte" finish/look?
Dr.Deltron
10-17-08, 04:09 AM
Just wondering, how hard is it to repaint a bike and how would I go about doing it?
Start here... http://www.bikeforums.net/showthread.php?t=175053 ;)
Start here... http://www.bikeforums.net/showthread.php?t=175053 ;)
beca
11-13-08, 03:29 PM
Hi-
I am an owner of a very old Lemond bicycle. I've recently decided to repaint it and then put newer parts on it. I have a question about the paint. I was planning on using a spray paint for the base (rust-oleum) but I also wanted to hand paint some designs. I'm curious as to what types of paint I can use over the top of the spray that will dry properly. Can I just use any type of acrylic paint? Should I look into auto paint? I was planning on priming, sanding, spray base layer, hand paint designs, then clear coat. Any information would be helpful. Thanks!
I am an owner of a very old Lemond bicycle. I've recently decided to repaint it and then put newer parts on it. I have a question about the paint. I was planning on using a spray paint for the base (rust-oleum) but I also wanted to hand paint some designs. I'm curious as to what types of paint I can use over the top of the spray that will dry properly. Can I just use any type of acrylic paint? Should I look into auto paint? I was planning on priming, sanding, spray base layer, hand paint designs, then clear coat. Any information would be helpful. Thanks!