smovlov
10-11-08, 02:21 PM
Will this kit work with an older Nishiki with Dia-compe brakes? I cant seem to find anything that shows cable ends or any kind of photos.
Bicycle Mechanics - Jagwire Racer Kit
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Jagwire Racer Kit
BCRider
10-11-08, 02:23 PM
a link would be nice.
If the kit is specified as for road bikes then you're good to go. If it says mountain bikes then you're not unless you swapped over the bars and levers at some point in the past.
If the kit is specified as for road bikes then you're good to go. If it says mountain bikes then you're not unless you swapped over the bars and levers at some point in the past.
smovlov
10-11-08, 02:31 PM
Sorry... here it is.
http://www.ebikestop.com/jagwire_racer_complete_road_brake__derailleur_diy_kit_red-CA6168.php
Do Shimano, Campy, and SRAM all use the same cable ends for shifters and derailers?
http://www.ebikestop.com/jagwire_racer_complete_road_brake__derailleur_diy_kit_red-CA6168.php
Do Shimano, Campy, and SRAM all use the same cable ends for shifters and derailers?
HillRider
10-11-08, 05:47 PM
Do Shimano, Campy, and SRAM all use the same cable ends for shifters and derailers?
No. I don't know about SRAM but Campy Ergo brifters require a smaller derailleur cable end fitting than Shimano STI's and using a Shimano-type cable in Campy Ergos can jam the end in very tightly. Use the correct cable.
Jagwire makes double ended derailleur cables that have a Shimano fitting on one end and a Campy fitting on the other and you cut off the one you don't need. Bike Tools Etc. sells them.
As to the end that fastens to the derailleur clamp bolt, yes they are the same (i.e. plain wire) for every make.
No. I don't know about SRAM but Campy Ergo brifters require a smaller derailleur cable end fitting than Shimano STI's and using a Shimano-type cable in Campy Ergos can jam the end in very tightly. Use the correct cable.
Jagwire makes double ended derailleur cables that have a Shimano fitting on one end and a Campy fitting on the other and you cut off the one you don't need. Bike Tools Etc. sells them.
As to the end that fastens to the derailleur clamp bolt, yes they are the same (i.e. plain wire) for every make.
BCRider
10-11-08, 07:37 PM
Well, it says road brake kit right on the package so that settles that.
I didn't know that about the Campy shifter cable ends. I'll have to file that away for some day. Thanks.
Er... the brake ends are the same as Shimano, right? I've never had Campy stuff.
I didn't know that about the Campy shifter cable ends. I'll have to file that away for some day. Thanks.
Er... the brake ends are the same as Shimano, right? I've never had Campy stuff.
smovlov
10-11-08, 08:49 PM
Well, it says road brake kit right on the package so that settles that.
Hey... Ya never know. I just figured I would double check before I ordered. I hate returning things via mail.
Hey... Ya never know. I just figured I would double check before I ordered. I hate returning things via mail.
HillRider
10-11-08, 08:59 PM
I didn't know that about the Campy shifter cable ends. I'll have to file that away for some day. Thanks.
Er... the brake ends are the same as Shimano, right? I've never had Campy stuff.
Well, that's one way to make them fit. :)
Actually Campy brake cable ends are also a bit smaller than Shimano but the consequences of using the wrong ones aren't nearly as bad as the ends are more accessable. In fact, one bike shop I know of does file Shimano brake cable ends down to use them in Ergos.
Er... the brake ends are the same as Shimano, right? I've never had Campy stuff.
Well, that's one way to make them fit. :)
Actually Campy brake cable ends are also a bit smaller than Shimano but the consequences of using the wrong ones aren't nearly as bad as the ends are more accessable. In fact, one bike shop I know of does file Shimano brake cable ends down to use them in Ergos.
BCRider
10-12-08, 02:30 AM
Well, that's one way to make them fit. :) ....
BADDABOOMP, CHSHSHshsh..... that's the old vaudeville drum and cymbal sound used for those bad old jokes if you're wondering.... :lol:
BADDABOOMP, CHSHSHshsh..... that's the old vaudeville drum and cymbal sound used for those bad old jokes if you're wondering.... :lol:
HillRider
10-12-08, 07:37 AM
BADDABOOMP, CHSHSHshsh..... that's the old vaudeville drum and cymbal sound used for those bad old jokes if you're wondering.... :lol:
Hey, you provided the straight line!!! :D
Hey, you provided the straight line!!! :D
nitropowered
10-12-08, 08:33 AM
The Racer kit has both campy and shimano ends on both shift and brake cables. Just snip off the one you aren't going to use