top506
10-19-08, 12:34 PM
This was OEM on my Miyata 512 but was replaced long ago. I'm passing it on to my brother, but forgot which one of the BB spindles in the bag go with it. Anyone know offhand?
Top
Top
Classic & Vintage - SR Signature crank question
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : SR Signature crank question
Ex Pres
10-19-08, 03:23 PM
The SR Silstar ('80 Schwinn WS) crank uses a 124(?)mm spindle offset +6mm DS if that's any help at all.
top506
10-21-08, 11:29 AM
bump
cyclotoine
10-21-08, 11:34 AM
I have no idea but I am usuing one on my girlfriend's SS with a 115mm shimano (italian) cartridge BB with the chainring on the inside. so a 115mm should work as a double I would think... JIS taper....maybe even a 113mm since I am using a conventional freewheel on a 126mm wheels with spacers and one 18t cog on the very end of the suntour freewheel. I hope that makes sense.
EDIT: just checked and I am running the ring on the outside, so assuming it is JIS taper the original BB should be around 114mm
EDIT: just checked and I am running the ring on the outside, so assuming it is JIS taper the original BB should be around 114mm