Singlespeed & Fixed Gear - Cheap cranksets, maybe 42t or greater

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA
trekkie820
03-18-04, 09:13 AM
Just as it sounds, i am looking for a cheap crankset, or even just a drive side crank that is a 170mm. I don't care what the condition, age, anything. Just that it is greater than 42t and can fit a typical Shimano sealed cartridge BB(square taper, i think). Thanks everyone!

stevo
03-18-04, 09:41 AM
confused. Do you need a crank or a ring?
trekkie820
03-18-04, 09:55 AM
crank(s) and a ring. If its a 170mm driveside crank, then i only need one. Anything else, i need two. Im running a 32? tooth ring, and its too small, i over pedal at too slow a speed for my liking.

roadfix
03-18-04, 10:21 AM
Your LBS's junk box or Ebay.
andrew_c
03-18-04, 01:33 PM
I have a shimano 600 crankset available. 43t. 170mm. I also have a 52t ring to go with the set. Right now it has BMX bolts on it to allow just one of the rings.

e-mail me if interested:
xrintrahx (a.t) yahoo (d.o.t) com
trekkie820
03-18-04, 02:50 PM
I have a shimano 600 crankset available. 43t. 170mm. I also have a 52t ring to go with the set. Right now it has BMX bolts on it to allow just one of the rings.

e-mail me if interested:
xrintrahx (a.t) yahoo (d.o.t) com

you have mail
Hunter
03-18-04, 04:02 PM
http://precisionpedal.homestead.com/sales.html
Shimano 600 crankset with rings $12! Not including shipping.
trekkie820
03-18-04, 05:29 PM
http://precisionpedal.homestead.com/sales.html
Shimano 600 crankset with rings $12! Not including shipping.

YOU have mail
trekkie820
03-19-04, 09:33 AM
Okay, sent the money out. Should be there in 3-4 postal days. Look forward to seeing the new cranks and the new speed they will bring me. Thank you, Alec
Hunter
03-19-04, 09:59 AM
You are welcome and thanks for the buisness.
trekkie820
03-19-04, 10:07 AM
Just to make sure of a few things: It will fit a standard Shimano BB with the square taper, right? Are you sending both chainrings? And, to remove the old cranks, if i don't care about damage, no special tools are needed?
Hunter
03-19-04, 09:05 PM
Yes it will fit a square tapered b.b, yes both chainrings are included. If you do not care about damage then a hammer and a block of wood will eventually get it off.