Electronics, Lighting, & Gadgets - Trek 8i doesn't register when in the cradle
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
10-21-08, 05:13 PM
I have an incite 8i wireless computer that stopped registering in the middle of a ride. The battery is 1 week old so it's not that. If I remove the computer from the cradle (mounted on handle bar next to stem) it will register input from the sensor. I tried moving the cradle to another location that received input from the sensor when out of the cradle, but same problem. Any ideas?
10-21-08, 08:49 PM
I had issues with my 9i, I had to move the cradle and computer down much closer to the sensor. It worked for a hot minute on the handlebars and then quit. This is quite disappointing for a 70 dollar computer.
Just try to move it closer, or put the sensor on the front wheel.
10-22-08, 05:49 PM
I tried locating it almost next to the sensor, already on the front wheel. It registers fine until i put it in the cradle. This has been working fine for 2 years, just recently went crazy.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.