Electronics, Lighting, & Gadgets - Edge 305 Auto Resume?!?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
OK I finally got my edge 305. I went out for a solo century yesterday with the Auto Resume set to complete stop.. about 54 miles into it.. I stopped at a light, and it didn't unpause.. I went about 50' and hit the start/stop button to wake it up.. it erased my whole ride and started fresh.. no big deal I will add up the two loops... but for the rest of the ride it was acting up.. it would pause at stops, but stay paused.... Any suggestions? Do I just turn off the Autopause and live with total time? :(
cdalefan
10-30-08, 11:41 AM
Are you using the wheel sensor or GPS for speed? If it is the wheel sensor make sure they are close enough to communicate.
Are you using the wheel sensor or GPS for speed? If it is the wheel sensor make sure they are close enough to communicate.
You could also try putting a new battery in the sensor. I have had that issue with a brand-new-right-out-of-the-box computer (though not specifically a 305)
it should be using GPS for the speed right? How would I change it if it were using the cadence/wheel sensor?
tornado
10-30-08, 03:23 PM
It uses the GPS for the speed as long as the signal is good. When the signal isn't good it reads from the sensor (no idea how quickly it switch from one to the other).