trekkie820
03-22-04, 09:21 PM
Okay, i am getting a Shimano 600 crankset, what length BB spindle will i need for this? or will any Shimmy square taper work?
Bicycle Mechanics - Shimano 600
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Shimano 600
Hunter
03-22-04, 10:46 PM
If it is going in your Trek frame I would say a 110mm will work.
roadfix
03-22-04, 11:44 PM
depends whether you're installing a double or a triple....
trekkie820
03-23-04, 06:23 AM
depends whether you're installing a double or a triple....
Double. Its for my Single Speed. And its going on my Concord road bike, not my trek.
Double. Its for my Single Speed. And its going on my Concord road bike, not my trek.
Gonzo Bob
03-23-04, 06:24 AM
Okay, i am getting a Shimano 600 crankset, what length BB spindle will i need for this? or will any Shimmy square taper work?
My 600 double from the late 90's (8-speed) takes a 115mm.
My 600 double from the late 90's (8-speed) takes a 115mm.
Hunter
03-23-04, 06:46 AM
Using it for a single speed will be about the chainline. Since you want to get it straight as possible, for what it is worth, my wifes Trek 920 I set up as a single speed it used a 110 square taped spindle with a shimaNO LX crank. Now it uses a Tru Vativ 113 ISIS with a Hussefelt crank.