BMX - frame
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
View Full Version : frame
Ryan k.
11-04-08, 02:03 PM
i have a fit am and if i would want to get a new frame i know i would have to get a new headset, but can i just take the bearing out of the frame i have know and put them in the new frame or would it just be easier to buy new bearing for the bottom bracket
fuzzbox
11-04-08, 03:07 PM
It depends what frame you are getting.
Ryan k.
11-04-08, 04:13 PM
ok well all the frames im looking at are integrated headset and i know i dont have an integrated so ill have to buy one and they have mid bottom brackets and i have a mid bottom bracket
FuzzyRyder
11-04-08, 05:49 PM
then you're good.
sonic six13
11-04-08, 10:38 PM
fit AM with an intergrated? never seen it.
you will need a headset, BB and cranks if yours are un-sealed
FuzzyRyder
11-04-08, 11:55 PM
read again
No i know he has a fit am but i wanted to know what frame he is getting.
FuzzyRyder
11-05-08, 05:28 PM
I wasnt talking to you.
Ryan k.
11-05-08, 09:23 PM
i dont know i was looking at alot of frames im thinking of the new fit dak frame 21 inch in raw. and do i really have to get new cranks to get that frame?
no, you. you just need a new headset. if the bottom bracket is the same for both frames.
Ryan k.
11-05-08, 10:00 PM
oh ok so should i just transfer the bearing i have or get new ones.
Either.
It would probably be better to get a new bottom bracket for like $20ish and then like a FSA impact for $30 and that would work good.
Ryan k.
11-06-08, 04:57 PM
oh ok do you know what size my spindle is like 19 mm or 22mm
Ryan k.
11-06-08, 09:02 PM
how do i check
Powered by vBulletin™ Version 4.0.0 Beta 4 Copyright © 2009 vBulletin Solutions, Inc. All rights