Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.steveknight
11-05-08, 02:52 PM
I wanted to get a switch on the setup because it was a hassle to unplug the light every day. I also wanted to only charge cells once a week. so this setup uses two packs I need 4.1 hours runtime) and a on off switch. it is a very simple setup that lets me use a single pack or more then one. I did not use a waterproof switch since I doubt the switch will get any water on it since it is under and behind the plastic.
I also wanted to make the light somewhat theft proof so I send the hose clamp to make it harder to remove.
http://i154.photobucket.com/albums/s266/knighttoolworks/transporation/dinotte1.jpg
http://i154.photobucket.com/albums/s266/knighttoolworks/transporation/dinotte2.jpg
http://i154.photobucket.com/albums/s266/knighttoolworks/transporation/dinotte3.jpg
I also wanted to make the light somewhat theft proof so I send the hose clamp to make it harder to remove.
http://i154.photobucket.com/albums/s266/knighttoolworks/transporation/dinotte1.jpg
http://i154.photobucket.com/albums/s266/knighttoolworks/transporation/dinotte2.jpg
http://i154.photobucket.com/albums/s266/knighttoolworks/transporation/dinotte3.jpg