CChaves
03-25-04, 04:11 PM
I heard the Shimano Saint has some compatability issues. Is it with a bottom bracket? or crankarms
or other non-Shimano Saint chainrings?
or other non-Shimano Saint chainrings?
Bicycle Mechanics - Shimano Saint
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Shimano Saint
John E
03-25-04, 07:10 PM
Since Shimano traditionally used a standard 2-degree square BB spindle taper with an oddball end dimension, and since chainring BCDs and BB shells are pretty well standardized, I would not be at all surprised if there were some sort of problem in crank-to-spindle fit.
d_D
03-25-04, 09:43 PM
Saint uses the new shimano bb with outbound bearings and 2 piece cranks (Hollowtech II?). Since you can only use a shimano bb I doubt it has problems.
I guess the problems if they exist could be with rings, frames or guides.
I guess the problems if they exist could be with rings, frames or guides.