voldemort
11-19-08, 10:16 AM
Do all bar end brakes for bullhorns have internal cable routing? Or are there ones that go on the outside (under bar tape)? (no holes in the bullhorn for cable routing)
Singlespeed & Fixed Gear - Bullhorn question
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Bullhorn question
Fleetdog
11-19-08, 10:21 AM
From what I've seen while shopping for bullhorns, most don't have internal routing holes drilled. Also, most of the bar end brake levers I looked at have the cable on the outside too.
In the end I purchased Nitto RB-021 bars and Tektro RX4.1 levers. Both use external cable routing.
In the end I purchased Nitto RB-021 bars and Tektro RX4.1 levers. Both use external cable routing.
delorean
11-19-08, 10:29 AM
Cane Creek TTs are external
yusuke343
11-19-08, 12:00 PM
depends, you can get bullhorn bars in both, but for the most part (being they are made for timetrials) they have have internal housing for aerodynamics.
gkelley
11-19-08, 12:12 PM
This seems to be what your looking for. it's hard to see in the pic but they do have the holes in the side to put the cables through. Great bars too
http://cgi.ebay.com/Syntace-Stratos-400-Black-Road-Handlebar-390mm-Small_W0QQitemZ120335786602QQcmdZViewItemQQptZCycling_Parts_Accessories?hash=item120335786602&_trksid=p3286.c0.m14&_trkparms=72:1205|66:2|65:12|39:1|240:1318
http://cgi.ebay.com/Syntace-Stratos-400-Black-Road-Handlebar-390mm-Small_W0QQitemZ120335786602QQcmdZViewItemQQptZCycling_Parts_Accessories?hash=item120335786602&_trksid=p3286.c0.m14&_trkparms=72:1205|66:2|65:12|39:1|240:1318