Classic & Vintage - ISO and For Trade thread parts 2 and 3.

Here's my updated list

Have F/R golden eagle derailleurs.

Have:

Dura-ace 7400 36 hole rear hub
NOS Matrix Aurora ceramic rims (pair), 32 hole
Couple of styles of modern Campagnolo cam QR, rear
Size 45 Paramount shoes, ridable shape
SR Signature triple crankset, 110 bcd, 50-48-30 rings
Rigida(?) silver double-wall eyeleted rim, 36 hole
Formula 9s cassette hub, 32 hole
Suntour bar-end shifters
Suntour Cyclone F/R derailleurs
Various stems, freewheels, odds and ends

Want:
Campagnolo front QR
Campagnolo 36 hole front hub (will trade for Dura-ace 7400)
Flip-flop hub, 32 hole, 120 or 126 mm spacing
Shimano aero lever hoods
Size 43 road shoes, Look compatible, condition unimportant
MKS GR9, Suntour sprint/cyclone/superbe pedals

WANT: Dura Ace 7700 Shifters

Please!

Have F/R golden eagle derailleurs.

Cool, PM sent.

ISO:

- Campagnolo front hub. 36h. Something 90's or newer would be nice but I'll consider vintage stuff too.
- Decent quality 36h clinchers, new or VGC. Mavic Open Sport are a pretty good value, maybe a set of those. Open to options.
- 27.2 silver alloy seatpost. Good quality, no Kalloy or similar. Think Shimano 600/DA or Campy...
- Campy Ergo brake/shift cables+housings
- Brooks Professional. Prefer black.
- Small bits needed for the frame I'm building..steel slotted fork dropouts with a single eyelet, cable stops, Canti bosses...

Have:

- NOS Specialized rear hub. 32h. Similar to Superbe Pro
- 1977 Raleigh Super Course. 21.5" Reynolds 531 frame, Suntour Barcons..mostly original.
- Tubular wheelset - Mavic rims laced to Dura Ace 7200 hubs (rear needs new axle. No skewers). Includes tires, they hold air but s/b replaced.
- Campy Veloce 9 speed triple crankset
- Campy Veloce 9s Ergo shifters. Pre 2001. (You would have to have something pretty good for me to give these up)
- Campy Nuovo Tipo high flange hubs with skewers
- Shimano 600 Arabesque group (FD, RD, brake calipers, levers, DT shifters, Crank + BB). No brake hoods
- Couple random sets of aero levers.
- 9 speed 105 STI levers. Good for parts or you may be able to rebuild or revive them but no guarantees...
- 2 sets of Crank Brothers pedals + 1 set of cleats. Cheap egg beaters that I rode once and didn't like and some older well used Candy C
- 1996 Univega Superstrada frameset 56cm, Double butted chromo, rack and fender mounts.

iso

-suntour bar end shifters

- 700c wheel set

Have

- 57 cm Schwinn super le Tour frame

- stronglight "diamant" 2 ring crank set

- Christophe Special toe clips

- Peugeot pl-8

ISO a 90-100mm Nitto Technomic stem. I have lots of stems and other stuff to trade... French, Schwinn and regular. Plenty of other stuff too.

This post used to have a link to my spreadsheet of bike stuff I want to sell or trade. I'm going to put that in the for-sale section.

PM sent. No further comment on noglider's post necessary.

Thanks, guys.

PM sent. No further comment on noglider's post necessary.

Thanks, guys.

Deleted mine too, sorry Tom.

USAZorro, is it safe to assume then that if a user wants to buy something (paying in cash) or is looking to sell something (receiving cash) that the post needs to be in the C&V Sales forum?

Deleted mine too, sorry Tom.

USAZorro, is it safe to assume then that if a user wants to buy something (paying in cash) or is looking to sell something (receiving cash) that the post needs to be in the C&V Sales forum?

You're correct. Prices are also needed for sale items.

USAZorro, I am also in search of things and am open to trade. If I were to post a link to a spreadsheet here that complied with the rules, what form would it have? Would it have as many sought items as items offered? Or is the whole idea not going to work?

USAZorro, I am also in search of things and am open to trade. If I were to post a link to a spreadsheet here that complied with the rules, what form would it have? Would it have as many sought items as items offered? Or is the whole idea not going to work?

noglider,

As long as it is separate from one with for sale items, it could be posted here.

Note that a link in the sig to a for sale listing is ok. I can't explain the rationale there, but that's the rule. Don't go overboard on font size and wild colors if you choose to do that.

Cheers,

Z

ISO: Williams Crankset - C1000 or C1200 preferred, will consider C34.

Have: all kinds of stuff to trade, just send me a PM.

**edit**

Got it! Thanks rhm.

ISO 86 BCD 34 tooth chainring.

Have: 44 and 30 tooth 86 BCD chainrings, Suntour/Diacompe drivetrain components and brakesets, just ask!

Anyone have a short-ish-steerer 1" threaded MTB fork?

Anyone have a short-ish-steerer 1" threaded MTB fork?Canti posts?

If Robbie doesn't, I think I do^

ISO Campagnolo Ypsillon rim polished

Have Campagnolo Gamma rim

ISO: a 60cm frame/fork in beater conditon - should take 27" wheels and have ISO threading. I don't want to hassle with British or French threading. I'm looking for a platform to play around with different wheel and build ideas.
HAVE: 1990 Schwinn hybrid frame, old Raleigh Portage which is a youth-size mixte with 24" wheels, a couple pairs of old 27" wheels including a set from a '84 Trek 620, Vetta rack, & other stuff

ISO:
-Campagnolo NR/Strada crankset. Gears don't matter, length doesn't really as long as it's around 170. Condition can be marginal - scratched, dinged, even rusting. I'll be polishing them anyway.
-French thread 6speed freewheel. Racier orientation - 25t max on the biggest cog.

looking for a quill stem 22.2 , 26. ~110mm length. something suitable (sturdy, classic looking) for a '89 paramount with modern 10spd components.
have:
6500 ultegra braze-on front derailleur

6500 rear derailleur
600 crankset w/bb
hand pump

campus pedals - spd clip in on one side, flat on the other

80s suntour derailleurs of a midlevel schwinn
specialized alias saddle

600/ultegra rear hub
profile design carbon bottle cage
7400 rear derailleur

9 speed ti cassette (no lockring)

27.2 alum seatpost. generic

ultegra skewers

130 / 26 bontrager stem
a few other things.

Canti posts?

Yeah, steerer length needs to be pretty short though

3373jones, PM sent.

mazdaspeed, I'll get photos.

3373jones, PM sent.

mazdaspeed, I'll get photos.

Can you measure from the crown race to the threads?

ISO:

700c wheelset, 120 or 126mm (preferred) spacing, machined widewalls on the rims, clincher that'll work with a 25-28mm tire or so. I have a hand build 27" wheelset with Shimano high flange hubs laced to Araya 27x1 rims - nearly NOS rims - probably less than 400mi. I have a couple freewheels here to throw in, as well as some other stuff. Trying to put the finishing touches on my Gazelle A-Frame rebuild plans.

Yeah, steerer length needs to be pretty short though

A steerer that's too long isn't that big of a hurdle. Any decent LBS can cut it and extend the threads in little time.

Can you measure from the crown race to the threads?I'll measure everything, no problem.

ISO Cinelli stem 1R or 1A, 80 or 90mm. Got a French one? Even better.

Have: Cinelli 1R, 105mm, 22.2. Also other stuff.

A steerer that's too long isn't that big of a hurdle. Any decent LBS can cut it and extend the threads in little time.


I'll measure everything, no problem.

Well, turns out I don't need it. I had a fork that would work, but the steerer was too long, then I realized (like ColonelJLloyd said) that the bike shop could probably thread it, and a few $ and 10 minutes later the fork has sufficient threads! Thanks again Robbie but it turns out I don't need a fork afterall. By the way, I sent your caliper out today.

Cool beans, mazdaspeed. I wasn't that big on going out under the back porch where I have some forks. It was orange, if I remember.

ISO: Good yellow road saddle, the more marigold vs. yellow, the better.

Have: 3 to trade for one.
Pista by Velo (was Bianchi labeled).
http://i261.photobucket.com/albums/ii80/RobbieTunes/P1170489.jpg

Avocet Gel
http://i261.photobucket.com/albums/ii80/RobbieTunes/P1170488.jpg

SSM "M" w/preforated letter, very light.
http://i261.photobucket.com/albums/ii80/RobbieTunes/P1170486.jpg

Anyone have an extra set of friction barcons by chance? Got yet another bike today... lol

ISO - various Dura Ace components
- 7400 Braze-on FD
- 7401/7402 Aero Levers
- Fluted seat post

PM me if you have any

Have:
- Daytona 170mm crank-arm set with 52/39 - clean
- 105 square-taper crank-arm set - needs clean
- Daytona english-threaded BB
- 1 (yes, 1) Gran Compe brake lever - hood in bad shape
- 1 Gran Compe brake caliper

Anyone have an extra set of friction barcons by chance? Got yet another bike today... lol

I think Brian (balindamood) has a box of Suntour's. Send him a PM.

I have a pair of NorthWave shoes, for Look type pedals, in size 42.

http://farm6.static.flickr.com/5135/5418675595_b0e5073593_m.jpg

Truth be told, I have two pairs.

Happy to trade for something. Bigger shoes? Whatchagot?

Rudi, I have a pair of Specialized BG's in size 45 if you're at all interested in those. I don't need more shoes, but I am looking to get these out of my room.

Email sent re. tubular wheels.


Have:

1R stem (105mm, 26.4)
1A stem (120mm, 26.4)
8s campy spacers
old 26.0 Fiamme bars (a bit narrow)
good 9s shimano chainrings - 39,53,53 with bolts

Wanted:
Tubular wheels for my Italian

Anyone have an extra set of friction barcons by chance? Got yet another bike today... lol

I think I have a set of Shimanos around here somewhere. Let me know if I should dig'em out of a box.

Also, pm me an email address and I'll send you a pic this afternoon.

Cleaning out the parts box today. Here's a couple pics of stuff that I never, ever anticipate using. Hopefully someone out there will have a use for some or all of it. You'd be surprised how little I'd be willing to let a lot of this stuff go for, especially if you were also covering shipping costs. Plenty of this stuff would really fit better in the free stuff thread. I'm making a post office run in the morning for some other trades with lovely BF members so get your PM's in soon and get new (to you) stuff this week.

What I could use in trade:
700x23ish presta tubes
Black bar tape - cloth or fake cork
Narrow cloth rim tape
Black brake housing
Brake and shifter cables
Hoods for Shimano SLR levers
Chainring nut wrench
One of those under-the-saddle tool pouches
Metal tire levers
Seat post clamp bolt
26.6 seat post
Allen-head crank bolts (for Campy, if that matters)
Anything else consumable (road bike-specific)

Pictures:

http://i613.photobucket.com/albums/tt219/glissonkid/Components/DSC_0370.jpg

http://i613.photobucket.com/albums/tt219/glissonkid/Components/DSC_0369.jpg

First pic:
Viscount pedals, no dust caps, spin great but a little loose
Generic steel flat pedals
Suntour alpha 4050 derailleur
Atom FRENCH THREADED narrow 6 speed freewheel
Shimano Arabesque clamp-on shifters
Shimano Light Action group - shifters, derailleurs (can dig up a freewheel, too); front missing cable clamp bolt

Second picture:
Dia-compe non-aero levers with turkey wings ground off
Universal center-pulls, levers and brakes (including straddle cables)
Weinmann QR levers with white Carlton hoods
Single Cane Creek interrupter lever w/ replacement clamp bolt
Shimano SLX levers - look to be shifter/levers with shifters ground off
Lambert levers with dry half-hoods
Dia-compe aero levers - a little stiff, but usable

Not pictured:
Viscount stem (~70 mm)
Normandy HF front hub
Bright orange Skyway tuff pads - same shape as Kool Stop Continentals, new

Stausty - are those your personal shoes sticking into the corner of that second picture? They look unique. Pearl Izumi?

Have: 27.0mm Dura Ace fluted seatpost, imperfect but 100% usable and not bad looking. It's missing the "half moon" washer that the binder bolt sits on, but it works fine.

Want: Similar 27.2mm post, something silver and reasonably classic looking.

Also looking for Shimano downtube cable stops, curved, not flat.

Thanks,

Pete

Stausty - are those your personal shoes sticking into the corner of that second picture? They look unique. Pearl Izumi?

They're Paramount, sold by Schwinn in the late 80's. I used to have a pair.

ISO original Selle Italia Turbo saddle for 1987 Univega Super Speciale restoration. I don't need NOS or a modern copy, just an original in good condition. Thanks.

this may seem silly but I am actually looking for 2 or 3 NOS spoke protectors. I need the style for a FW with the metal mounting area and for 24-26T FW cogs. I actuallt need atleastone for a Disc cover I want to put back into use.

I also could use a 32' Campi rear hub. model not too important, HF would be awsome.

I don't have too much to trade (well that I am willing to trade anyway) for a nice HF hub I could possibly give up a 8spd Campi hub of unknown model, but I suspect it is Veloce.

http://i.ebayimg.com/19/!B4N(omQCWk~$(KGrHqR,!hoE)702rGnlBMo-lRgHnw~~_12.JPG

Stausty - are those your personal shoes sticking into the corner of that second picture? They look unique. Pearl Izumi?

They're Paramount shoes like mudboy mentioned. The graphics are the same as on the PDG Series Paramounts from the early 90's or so. They were a throw-in with a bike I purchased (and subsequently sold) last year. They're too big for me and are promised to another BF member, thankfully in trade for a pair of shoes that should fit.

Does anyone, by chance, have any good axle cones that will work on a front shimano exage MTB hub? Might need rear ones as well, it depends on whether these suntour cones sitting here will work.

Have:
-Specialized BG road shoes, 2-bolt or 3-bolt cleat patterns. Used. Size 45.
-Forte mountain bike shoes. 2-bolt cleat pattern. Used. Size 47.

ISO:
-Selle Italia Flite. Any condition. Titanium preferred.

Also, I still have this crankset (ultegra triple missing the small chainring, uses octalink bb) and a rear ultegra dual pivot caliper with a bent barrel adjuster and pads that should be replaced:

http://i13.photobucket.com/albums/a295/1967cutlass/ultegrastuff.jpg

I'd trade this light up sign for something useful to me, but shipping might be a pain.

http://i13.photobucket.com/albums/a295/1967cutlass/schwinndealer.jpg

Still have this galli crankset (175)

http://i13.photobucket.com/albums/a295/1967cutlass/gallicrankfront.jpg

(cups are shot, spindle is OK)

http://i13.photobucket.com/albums/a295/1967cutlass/gallibottombracket.jpg

Still have these cinelli top 64 bars (internally routed) and 105mm stem

http://i13.photobucket.com/albums/a295/1967cutlass/IMAG0009.jpg

What could I use... hmm..

- Nice, powerful cantilever brakes (XTR would be ideal)
- Nice saddle; brooks b17, professional, turbo, avocet touring, other higher end vintage saddles
- An offer I can't refuse

HAVE: Maresi shoes, size 45, with Look cleats.

WANT: SPD or Look compatible shoes, size 47 or 48.

My feet seem to have grown!

Tom, email sent.

HAVE:
- 32h Dura Ace 7400 (?) Rear Hub, 8 SPD SIS, Used Great Condition
- Shimano 105 Hubset, 32h Front and Rear, Ice Grey Color, Used Great Condition
- 2x 32h Araya ADX-400 rims, Silver, Never Laced, Light Wear
- Specialized Toupe 143mm, Black, Practically New

WANT:
- Silver 1 1/8" Threadless Headset
- Silver Long Reach Brakeset (57mm) or Cantilever Brakeset
- Silver 27.2 Seatpost
- Touring Wheels (Silver, 36h and 10mm front, 40h and 126mm or 130mm rear)