Classic & Vintage - ISO and For Trade thread parts 2 and 3.

I think I have the correct Shimano 105 rear brake caliper, a Suntour RD that's a Shimano 600 Tricolor knockoff (don't remember the model name offhand), and a set of Suntour Accushift levers that can be set to friction mode. I'll check when I get home later tonight.

Could use the SR stem (if it's a quill) and another chain whip.

ISO: Campagnolo Record high flange hubs....36H

I believe I have a set. They look pretty decent and spin nicely as I recall? I also have a list of "wants". I'll shoot some pics to ensure this model meets your requirements and if so, I can let you know what I'm looking for.

I think I have the correct Shimano 105 rear brake caliper, a Suntour RD that's a Shimano 600 Tricolor knockoff (don't remember the model name offhand)--GPX, most likely, and it'll handle 6 to 10 speeds, as far as range
bumped..

Nope, it's a Radius, and I swear it's a dead ringer for a Shimano 600 Tricolor 6400 RD. And the Accushift Dt shifters are indeed both friction or index and are complete (although you'll have to work on the rusty right side cap). Bad news is that the 105 rear caliper I have is the shorty version- 39-49mm. Good news is you can have the RD and shifters for the cost of postage. PM me if interested.

[QUOTE=miamijim;13423358]ISO: Campagnolo high flange hubs. Condition not important.[/Q

1 front and 1 rear, but not an exact match. one is cleaner than the other. I have not attempted to clean/polish either. Skewers do no match in the photos (1 is campy and 1 is ofmega), but I have extras, if wanted

ISO: DA Seat Post; Campy Chorus 8 SPD RD; Campy SR seat post.

[QUOTE=miamijim;13423358]ISO: Campagnolo high flange hubs. Condition not important.[/Q

1 front and 1 rear, but not an exact match. one is cleaner than the other. I have not attempted to clean/polish either. Skewers do no match in the photos (1 is campy and 1 is ofmega), but I have extras, if wanted

ISO: DA Seat Post; Campy Chorus 8 SPD RD; Campy SR seat post.

I need a rear hub and have a chorus RD. Still can'r PM yet, so drop me a line. jeirvine at gm@il.

I think I have the correct Shimano 105 rear brake caliper, a Suntour RD that's a Shimano 600 Tricolor knockoff (don't remember the model name offhand), and a set of Suntour Accushift levers that can be set to friction mode. I'll check when I get home later tonight.

Could use the SR stem (if it's a quill) and another chain whip.

It's a quill. Let me know!

EDIT: Nevermind, scrolled down and then PM'd ya. Thanks!

WTT: Thick wall NR rifled English adjustable cup

NEED: Thin wall Record English adjustable cup

Please note in my request for stems, I have Cinelli 1A, not 1R. MALMS striikes again.

WTT: Thick wall NR rifled English adjustable cup

NEED: Thin wall Record English adjustable cup

FWIW, any standard adjustable cup (Sugino, Sakae Ringyo, TA, etc) can substitute for a thin Campy cup.

ISO (buy/trade): Selle Italia Flite Saddle, perforated. New or slightly used, must be very good condition.
HAVE:
- Campagnolo Record - Mavic GP4 tubular wheelset
- Campagnolo Record hubset
- Many stems and bars, freewheels, seatposts
- Some interesting frames (SLX, Gentsracer AX, ...)
... let me know what you are looking for...

Have:
A nice 65-cm Romic Frame
A nearly complete Shimano 600 set (brakes, levers, shifters, bb and crankset--no cassette, no hubs)
http://www.bikeforums.net/showthread.php/776810-Found-a-Romic-frame-now-what
Pics of the frame here

Need:
A good set of touring/commuting wheels in 700c
A 180mm triple crankset
A Burley QR Alternative Hitch (integrated QR skewer and trailer hitch.)
Lights that take an 18650 battery.

ISO:
Used bar-end friction shifter set, Suntour preferred but Silver would work. Needs to work with Suntour ARX derailleurs (5x3)

Have:
Nitto B-115 handlebars - 42cm - like new
Performance Roubaix pedals, by Look
Vetta RT77 computer
NL alloy MTB/hybrid handlebar
MTB stem
Shimano servo wave brake levers
MTB barends
Flickstand
...other stuff, or we can make a deal

ISO:

Important:
Shimano 6400 headset adjustable cup
12 mm cone wrench
Campagnolo DT shifter hardware for one side - especially the D-ring

Nice to have:
8s 640X Tricolor stuff:
RD
Hyperglide-compatible hubs
Cranks
Dual-pivot brakes (6403)

Dura-Ace 7402:
Brake levers
Headset
BB

Have:
1. Specialized Cold-forged road cranks 170mm 144 BCD with a 42 ring on it. The 52 ring has had the teeth ground off by the PO. I was going to build a FG commuter and haven't ever bothered.

2. Specialized cold-forged *Suntour Microdrive BCD* crankset. 175mm 56mm BCD inner ring. I have at least one new 22t ring and the original steel ring that got bent somehow and re-straightened.

3. 2 pr 600 'triangle' pedals. One of em has the dust cover missing. Pair 1: no clips or straps. Pair 2: med clips and (IIRC) double straps

4. Old computers: Avocet 30s and 31s mostly Varying colors. Paramount computer with a cracked mount. The Paramount computer worked when I took it off.

5. 36h Campy ?Record? hubset. Decent shape. Definitely used. Still spin nicely. FW

6. Black perforated Turbo that needs some TLC: the cover's coming undone around the bottom.

7. More misc stuff like a box of box-section tubular rims GL330s, Victory Stradas and Cronos, as well as a pair of Omega XLs All are 32h and have been previously glued. Been in storage for the last 6 years. There's no track here, so no need for em any more. :cry

8. Track BB Spindles: Mostly D/A Most have cups with em

9.
Need:
28h 7401-7700 D/A hubs (XTR M900-952 works too) *this is the most pressing need*
Rival rear der and shifters
12cm -17deg stem with 31.8 HB clamp
32-34c Grifo or Fango tires
...and other stuff! Let's make a deal!

M

Hey folks, here is a Schwinn World Sport that is way too small for me. Hopefully someone here can use it. I'm not sure the year but I think early 90"s, if anyone can correct this, please do. The paint is pretty nicked up as it looks like it was chained up a lot. Nice dark grey color and cable bosses on the tubes. FORK is BENT but I'll include it. Measurements are as follows:

21 1/2" from Bottom bracket center straight up to top tube center

23" from steerer tube center to seat tube center

Approximately 25" from steerer tube center to BB center

Wheelbase approximately 41 inches

4130 chromoly tubing Taiwan made

Numbers on bottom of bb shell 68J G1185 5741550


What I need or would like to trade for:

$20 plus shipping cost
or Shimano 600 AX left crank arm 170mm
or Shimano 600 AX funky aero bottle and cage
or 225522225523225524225525Seat bag

I'm in south florida if you are local. PM me if interested

Have:
3TTT quill stem, 26.0 110mm.

Want:
3TTT quill stem, 26.0, 100mm

http://s624.photobucket.com/albums/tt327/oldarizona/Parts%20for%20Sale%20or%20Trade/Stems/

---

Have:
Shimano 6503 triple crankset, 175mm

Want:
Shimano 6503 triple crankset, 170mm

---
Have:
NOS or Nearly NOS Sugino AT Special crank, 180mm, 46/36/26

But I don't have the non-drive side crank

Want:
Compatible 180mm crank arm for the non-drive side
-or-
Set of Sugino Cranks that I could use those rings on. Size: 170-175

---
Have:
Campy Centaur Alloy 10S UT crank, 175mm with English and Italian BB.

Want:
Campy 10S Triple Crankset, 172-175mm and bottom bracket. Prefer square taper.

http://s624.photobucket.com/albums/tt327/oldarizona/Parts%20for%20Sale%20or%20Trade/Cranks%20and%20Chainrings/

Other Pics of stuff I have here:

http://s624.photobucket.com/albums/tt327/oldarizona/Parts%20for%20Sale%20or%20Trade/

http://i624.photobucket.com/albums/tt327/oldarizona/Parts%20for%20Sale%20or%20Trade/Stems/DSC_0553.jpg

http://i624.photobucket.com/albums/tt327/oldarizona/Parts%20for%20Sale%20or%20Trade/Cranks%20and%20Chainrings/DSC_0540.jpg

http://i624.photobucket.com/albums/tt327/oldarizona/Parts%20for%20Sale%20or%20Trade/Cranks%20and%20Chainrings/DSC_0527.jpg

http://i624.photobucket.com/albums/tt327/oldarizona/Parts%20for%20Sale%20or%20Trade/P1040984Large.jpg

ISO

Deore XT U Brake for an 80's Fisher Montare...

Have

Dia-Compe NGC 400 calipers, great condition

Gray anodized Universal Squadra Calipers, 80's, mostly NOS

Gipiemme Sprint pedals, missing one dust cap

'53 SA AW hub, good working condition

NOS SA trigger circa 80?

excellent (50's?) BSA #3 1/8" cog for track (16 or 18)

French pump with the tri-coleur stripes...wrong hose (woods?)

various wingnuts

stuff and more stuff

ISO:
Shimano or SRAM 9speed cassette. Smallest cog being 11 and largest being up to 25

Have:
6 speed Suntour freewheel 13-18

NEED-
Shimano RSX right - rear shifter return spring. The spring that is under the nameplate cover. I believe that RSX, RX100, and 105 springs are all the same.

Don't have enough post for email. owenmc006 and gmail.

Thanks

ISO: Brooks B67, B72 (if B72, no leather cracking around the nose rivets), or other upright sitting Brooks saddle in decent condition.

For trade: Decent condition Brooks B17.

http://i292.photobucket.com/albums/mm26/mparker326/th_DSCF0340.jpg (http://s292.photobucket.com/albums/mm26/mparker326/?action=view&current=DSCF0340.jpg)
http://i292.photobucket.com/albums/mm26/mparker326/th_DSCF0339.jpg (http://s292.photobucket.com/albums/mm26/mparker326/?action=view&current=DSCF0339.jpg)
http://i292.photobucket.com/albums/mm26/mparker326/th_DSCF0338.jpg (http://s292.photobucket.com/albums/mm26/mparker326/?action=view&current=DSCF0338.jpg)
http://i292.photobucket.com/albums/mm26/mparker326/th_DSCF0334.jpg (http://s292.photobucket.com/albums/mm26/mparker326/?action=view&current=DSCF0334.jpg)
http://i292.photobucket.com/albums/mm26/mparker326/th_DSCF0341.jpg (http://s292.photobucket.com/albums/mm26/mparker326/?action=view&current=DSCF0341.jpg)

ISO a nice set of DT shifter levers to fit the older (early-mid '80s) Shimano bosses.

Top

Looking for a cheap set of friction thumb shifters. I really only need the clamps and not the actual levers but will take the whole thing so no arm twisting needed. Nothing Shimano though. Prefer the ones with the thumb screw on the top to adjust the tension.

ISO: Brooks B67, B72 (if B72, no leather cracking around the nose rivets), or other upright sitting Brooks saddle in decent condition.

For trade: Decent condition Brooks B17.

http://i292.photobucket.com/albums/mm26/mparker326/th_DSCF0340.jpg (http://s292.photobucket.com/albums/mm26/mparker326/?action=view&current=DSCF0340.jpg)
http://i292.photobucket.com/albums/mm26/mparker326/th_DSCF0339.jpg (http://s292.photobucket.com/albums/mm26/mparker326/?action=view&current=DSCF0339.jpg)
http://i292.photobucket.com/albums/mm26/mparker326/th_DSCF0338.jpg (http://s292.photobucket.com/albums/mm26/mparker326/?action=view&current=DSCF0338.jpg)
http://i292.photobucket.com/albums/mm26/mparker326/th_DSCF0334.jpg (http://s292.photobucket.com/albums/mm26/mparker326/?action=view&current=DSCF0334.jpg)
http://i292.photobucket.com/albums/mm26/mparker326/th_DSCF0341.jpg (http://s292.photobucket.com/albums/mm26/mparker326/?action=view&current=DSCF0341.jpg)

PM sent

ISO Shimano Deer Head front and rear dérailleurs.

Have lots of stuff to trade

I am in search of the top, adjustable headset race and headset lock nut for a Raleigh Grand Prix, definitely 26TPI stuff...

I have a 1983 Trek 760 with original components. It is in exc tuned up condition, low mileage. My problem is that i cant ride it up steep hills the gearing is too hard for me. IT has 7 speed 12-21 gears in back and a 52/42 in front. The deraillers gears and downtube shifters are suntour supreme. Offhand i dont know who made the crankshaft.
I am looking to swap it all out for something easier, probably a modern triple crankshaft setup.
I dont do my own repair work, i use a local repair tech who is very good. I could be wrong but i think to change to a modern setup ie shimano 105 9 speed i will have to change the back wheel.
I am just posting to see if anyone is interested in all of the old parts possibly including the crankshaft and possibly both wheels or at least the back wheel. I'd then be looking for all new modern parts such as wheels, 9 speed cassette, front and back deraillers for a triple, and triple crankshaft. Possibly modern shifters unless i use my old downtube friction shifters. Or if someone has some old triple setup from an old ROAD bike (not a mountain bike please) such as an old Trek 400 or Specialized sequoia, maybe id be interested in that. Im not looking to give away these old suntour components i have very cheaply, but maybe there's someone out there that has a big interest in the vintage parts at a decent price to restore some old bike, so i can upgrade mine to more useful modern parts with the wider gearing i need.

looking for nitto stem tech-whatever-its= called in a 90 or 100mm.
Need taller stem, that's why. I have a few bikes i need these stems for. I can pay $ or trade you my shorter (less height) stems. I know i can buy them new, seeing if anyone has any used ones or unused new ones around, cheaper than i can buy them for new online, or trade for my shorter stems.

ISO: 8spd brifters, pref. 105 or better. Don't mind something with some wear or that needs to be cleaned out, just looking for some that will work.

Have: Lots of random stuff for trade, let me know

have: lots of early 90's shimano XTR

ISO: shimano sante

Have: Campy (Nuovo) Record front hub 32spoke laced to Mavic Open S.U.P. rim. Spins smooth, one or two spokes slightly bent but wheel still true and round.

Want: Campy (Nuovo) Record front hub 32spoke in good/very good condition.

Yes, I could unlace the wheel I have, but figure if someone wants a good wheel no use in me taking one apart. I have a couple wheel boxes around here, you pay difference in shipping cost between the two items (or at least split the difference with me). The Open SUP rim is pretty narrow, machined sidewalls. Had it around here for a backup wheel but rarely used probably in the last 20 years.

Have:

- 23" PX10. Plain lug variant. some surface rust issues. original wheels, shifters, and F/RD are long gone.
- small Trek frameset, guessing it is about 52cm. No make/model decals or headbadge (84 Trek 500?)
- 8 speed Shimano 105 brifters, wheels, and F/RD. Tested on the tiny Trek and seem to work fine.
- 58cm Fuji Opus III frame/fork
- Shimano 600 tricolor crankset(170) and brake calipers. (I might be convinced to keep the 105 bits and offer up the 600 brifters and F/RD)

Need:

I don't know...something fun. A 70's Fuji Newest would be nice, as would some sort of vintage track bike or frameset. I ride a 58-60cm (c-t) frame. What have you got?

Edit: I guess that I could use a 36h dynohub as well.

beech333 at gmail dot com.

http://4.bp.blogspot.com/-3ZEqInQlQtw/TmLrPd9mf1I/AAAAAAAAAXg/PPNB9DrrNOE/s320/Trek+006.JPG

http://2.bp.blogspot.com/-6gJVWGfD1Rc/TdEbDPZK7CI/AAAAAAAAAN0/tgwKFs0PX3o/s320/000_0143.JPG

ISO a 3-speed freewheel, Italian thread, English OK.

I have a 17-19-21 but I need one with a bigger granny gear. A 26 would be ideal but I'll take anything bigger than the 21 I have.

Gots lots to trade.

ISO:
quill stem w/ 25.4 bar clamp (120mm-130mm)
aluminum or carbon flat bar 25.4mm
1in threaded headset

have:
weyless ergo road drops (black w/ 31.8mm clamp surface)
dia compe aero brake levers
centaur 172.5mm crank arms (80miles use)
chorus 10spd rings (53/39 fit centaur cranks)

ISO
Mountain Bike crankset 170 or 172.5 arms

Have
Truvative Elita road crankset triple 52/42/30...170 arms square taper
Shimano Exage Trail BioPace crankset 170 arms (still on bike)
Cranksets and chainrings are in great shape, crank arms show normal wear scuffs
http://i1124.photobucket.com/albums/l568/1clbaker/IMAG0415-1.jpg
http://i1124.photobucket.com/albums/l568/1clbaker/IMAG0416.jpg
http://i1124.photobucket.com/albums/l568/1clbaker/IMAG0417.jpg

Have: 1990 Trek 790 Frame & Fork, 23-inch

Want: 1990 Trek 790 Frame & Fork, 21-inch

Want: French drop bars that are 40cm or narrower, 25mm clamp size. Cosmetics don't really matter, just not bent.

Have: Tektro aero brake levers, Weinmann non-aero drilled levers, some 80s saddles...

Want: Campy TT cable clips
Have Dura Ace TT cable clips

ISO:

White Industries Road Hubs. Old school, new school, preferably 32hole. Being built into a new set of trainers.

I have an Atom front hub with brindled and chipped cones. Looking for cones or full axle assembly — or whole hub. Will find something to trade — levers, RD's — I'll dig around for whatever you may need. - Lorne

ISO:

White Industries Road Hubs. Old school, new school, preferably 32hole. Being built into a new set of trainers.
contact mazdaspeed.

I have an Atom front hub with brindled and chipped cones. Looking for cones or full axle assembly — or whole hub. Will find something to trade — levers, RD's — I'll dig around for whatever you may need. - Lorne

Lorne, if it would suit your needs, I believe I have a large-flange Maillard front, NOS with no skewer 36h as I recall. If you want it, it's yours for the price of postage if it's still hanging around in a box somewhere.

Need: Cinelli wedge for 1R stem. 226135

ISO: B17s, bar end shifters
Have nothing special:
brand new in package VO 650b fluted fenders
a rough-ish rootbeer Raleigh Sports (ladies) either whole or in parts
the stem and bars (and Shimano shifters, if I find bar ends) on this bike:
http://www.flickr.com/photos/61339233@N08/5816456676/in/set-72157626800387755
700c wheel set from an 80's Puch Alpina one broken spoke, which probably means the rest will go out like Christmas lights
Weinmann brake levers
unused gumhoods (modern)

ISO: Cable adjusters for Dia-Compe Gran Compe or Suntour Superbe first gen calipers...pictured here:

http://velobase.com/CompImages/Brakes/4CFDCD23-ECD5-489B-8979-B2671B91BE21.jpeg
thanks VeloBase.com

Have: a whole crapload of stuff...let me know what you need.

ISO: Cable adjusters for Dia-Compe Gran Compe or Suntour Superbe first gen calipers...pictured here:

http://velobase.com/CompImages/Brakes/4CFDCD23-ECD5-489B-8979-B2671B91BE21.jpeg
thanks VeloBase.com

Have: a whole crapload of stuff...let me know what you need.

Me, too.

226192Have: SR stem, 85 mm from bolt to center of stem clamp, overall height about 150 mm.
Need: comparable stem with long extension, at least 110, prefer 120. Or a good set of hoods to fit Mafac racer levers, or a good set of Suntour Power Ratchet downtube shifters.

Looking for a pair of steel Campy Pista Pedals to complete the restoration of my 1970's track Pogliaghi. 226199

Any help would be appreciated.

226192Have: SR stem, 85 mm from bolt to center of stem clamp, overall height about 150 mm.
Need: comparable stem with long extension, at least 110, prefer 120. Or a good set of hoods to fit Mafac racer levers, or a good set of Suntour Power Ratchet downtube shifters.

I might be interested, but having been born with a long top, I am reluctant to give my long stems. :{

ISO: Cable adjusters for Dia-Compe Gran Compe or Suntour Superbe first gen calipers...

I think I saw a pair on ebay in the last couple of days...

For Trade:

Have: Nitto Technomic Deluxe 26.0mm 9cm
Want: Nitto Technomic Deluxe 26.0mm 11cm or 12cm