Classic & Vintage - ISO and For Trade thread parts 2 and 3.

Sorry just saw this reply. I have a 39 on the bike now, very narrow for me. I was going for originality only, but if anyone has an Olympiade that would work too. I don't want to be a poser and buy a new one. Even though I have access to them "cheaper", they're still not a steal.

Check the width of them if you can, if there's a possibility of them being wider?,,,,BD

Sheesh. I just measured.

37.

Any super narrow shouldered folks out there need a super narrow bar?

http://www.bikeforums.net/showthread.php/489137-ISO-and-For-Trade-thread-parts-2-and-3?p=14178531&viewfull=1#post14178531

Wanted: Shimano 105 Long Reach Break Calipers (1055 preferred, but earlier will also work).

FT: Lots of stuff PM me, but a good straight across would be my 1055 short reach calipers...

ISO: shim / adapter to use 31.8 FD on 28.6 frame or ISO: Road triple FD with 28.6 clamp

Also looking for road specific Avid BB5 or BB7 disc brake calipers but that is probably a longshot in C&V...

Have: assorted bits and pieces to trade.

Have:
172.5 campagnolo centaur crank arms (silver, 135bcd, maybe 50 miles use)
campagnolo bar end levers mounted to brand new pauls thumbies (with 8 and 10spd index rings)
charge spoon saddle (black, brand new takeoff, never ridden)
dia compe aero brake levers

Want:
king bottle cage (iris)
look keo compatible pedals

ISO: Tektro or Cane Creek Aero Brake levers (the ones with quick release on the lever)
SPD compatible pedals and cleats

HAVE: Lots of random stuff

Jake

ISO: Tektro or Cane Creek Aero Brake levers (the ones with quick release on the lever)
SPD compatible pedals and cleats

HAVE: Lots of random stuff

Jake

I should have a set of Shimano spds about.

Maybe Tektro levers as well.

I'll check in the morning and take some pics.

ISO: Tektro or Cane Creek Aero Brake levers (the ones with quick release on the lever)
SPD compatible pedals and cleats

HAVE: Lots of random stuff

Jake

SPD two hole cleats as in MTB style? If so I'm pretty sure I have a new set, if that's what you're looking for LMK :)

SPD two hole cleats as in MTB style? If so I'm pretty sure I have a new set, if that's what you're looking for LMK :)

Those are the ones! I got a good deal on some trainer/cycling shoes that I can walk around in. So now I have to build a new bike, so I do not have to carry extra shoes around to change in to.

Jake

Looking for:

7 speed cassette for Unliglide hub. Has to be 105 or 600 (DA has different thread lockring). My hub came with a 6 speed and I'd like to move it up a notch. Would like a decent range (no corn cobs) current one is 13-24, I would like something similar or little better.

Have:
A few things I can offer. PM for details if you have the cassette!

ISO WTT WTB- Campagnolo Nuovo Record Jockey Wheels / Pulleys (the ones with just the bushing and two end caps.) Two would be awesome, one would be nice. Have a smattering of things to trade. Let me know.

HAVE: Dura-Ace PD-7400 pedals.
Unfortunately (very unfortunately) I have them up on the 'bay here (http://www.ebay.com/itm/320836150178?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649) in order to raise some much needed cash ASAP. I would much rather these find a nice place on one of your bikes, so please PM me if interested!

Also, I have a nice set of Alfredo Binda straps and a Dura-Ace seatpost (200mm, 25.8) if anyone's interested.

Wow that IS narrow!! Possibly the most narrow bar I've heard of?,,,,BD

Anyone have a set of skinwall tubulars for a reasonable amount? Lemme know?

I have some Spaceliner parts to trade for a Spaceliner rear tail lite lens like this onehttp://farm5.staticflickr.com/4030/4252411410_8972085eea.jpg (http://www.flickr.com/photos/45361363@N03/4252411410/)
Spaceliner project (before) (http://www.flickr.com/photos/45361363@N03/4252411410/) by davescoolstuff (http://www.flickr.com/people/45361363@N03/), on Flickr

updated:

Have:
silver kalloy 26.4 seatpost (long, used, but good condition)
campagnolo bar end levers mounted to brand new pauls thumbies (with 8 and 10spd index rings)
charge spoon saddle (black, brand new takeoff, never ridden)
dia compe aero brake levers

Want:
king bottle cage (iris)
look keo compatible pedals

The raised part on the DT that the collar fits over looks like this:
http://i261.photobucket.com/albums/ii80/RobbieTunes/Recent%20pics/Publication1-2.jpg

Not like this:
http://i261.photobucket.com/albums/ii80/RobbieTunes/Recent%20pics/Publication2-1.jpg


If I'm not mistaken, we have more than enough of those at work to last us until the Zombie Apocalypse (some with clamp-on mounting bands for frames without studs, in fact). I'll check tomorrow, and grab you a couple if they're the type that fits those frame studs. You're using Shimano downtubes on top, is that correct?

Yep. Those are it. PM sent.

Looking to trade a 120mm Cinelli Grammo stem for a 100mm. Please PM if interested.

ISO Looking for Campy or compatible Italian threaded 102x70 bottom bracket. Square taper of course. Will be using with 1999 Record double.

HAVE Campy Italian 111x70 bottom bracket NIB. OR Campy British thread 102x68 Chorus with somewhat chewed up teeth on cups. Threads OK, install teeth ok, but ugly.

Lots of other stuff too... Ask.

Thanks

-Tom

ISO alloy seat post 26.8 not fancy, Laprade, SR. Hi-zoot ok.

SPOKEN FOR : Mks Esquartz-102. Very few miles on them, though rusty spindles. Rebuilt.
GONE : SR SP-100. Rough, but not rusty.

http://davidnewtonguitars.squarespace.com/storage/bicycles/pedals.JPG

ISO alloy seat post 26.8 not fancy, Laprade, SR. Hi-zoot ok.

have:
Mks Esquartz-102. Very few miles on them, though rusty spindles. Rebuilt.
SR SP-100. Rough, but not rusty.

http://davidnewtonguitars.squarespace.com/storage/bicycles/pedals.JPG

PM enroute.......

ISO-a 9 or 10 speed 105 or Ultegra group. I am in need of brifters, FD, RD, brakes, and maybe a 175 compact double or triple crankset/BB for English threads.

WANT: A black turbo super saddle (beat up a bit is fine)

HAVE: white turbo super saddle (beat up a bit), san marco rolls, brooksb17, concor light '93, concor light '01

Not my picture, but here's what the Super Turbo would look like, it has the clear plastic covering on the front and rear:

http://i1106.photobucket.com/albums/h369/RootbeerIsDelicious/super2.jpg
http://i1106.photobucket.com/albums/h369/RootbeerIsDelicious/turbo-1.jpg

Want:

Campagnolo mountainbike parts. In particular brakes and levers.

Have:
-Campagnolo GS group, complete save for the BB. Can provide shimano replacement. Missing hoods and front clamp has some drillium
-complete Campagnolo Daytona group, with either a triple or a double. deraillers are for triples, but do work with the double.
-58 cm concorde prelude frame, columbus SL, light rust on the fork, heavy rust on the NDS chainstay

FT: 135mm x 1" Salsa stem. Threadless. Bought it for my 87 Rockhopper. Has LOTS of rise. (no pics till ya ask me for em)

I have a Cinelli stem 90mm x 26.4 clamp. Not pristine but not abused.
I have a couple of pairs of 600 'triangle' pedals. One has a pair of toe clips, the other doesn't. The pair that doesn't is missing an axle cover.
I have a Ti quill stem 130mm x -17. No stickers, but it looks like a Ti Eclypse.

There's more, but I'll have to go look in my bins of stuff in the garage.

Looking for a 6600 28h rear hub, a 7401-7700 28h rear hub, a black Open Pro rim (32h), a Mistral box-section rim (32h) preferably one of the 'for racing only' models, but pretty much only a box-section Mistral. ...and other stuff. Whatcha got?

M

Have:
honey Brooks Pro, unused PENDING
lots of 80's/90's derailleurs (see list) (https://docs.google.com/spreadsheet/ccc?key=0AhafuECBes5_dDlTSExoYVdjYmd0R250cDEzX1FIa0E)
Yellow Jersey tubulars unused
GP4 clincher/Record hubs wheelset
Campy Chrono tubular rims 700c
GP4 tubular rims
Victory Crono tubular rims
various brake levers (Campy/Shimano SLR/Cane Creek/Dia Compe)
white Turbo saddle (good, not great condition)

Want:
black Brooks Pro or B17 PENDING
bar end shifters (Simplex would be great) PENDING
black fenders
700c touring rims or wheelset (22mm width)
SunTour or Shimano long cage RD, like Vx or Cyclone, Crane
porteur rack

Have a 92 Giant Cadex 2 carbon composite frame with the aluminum fork. This is a 59 cm and is in good shape...it will need a new clear coat but the paint and decals underneath are in good condition. The lugs appear to have been painted. I bought the bike for the components. .235525235526235527235528http://www.bikeforums.net/images/misc/pencil.png

Have a 92 Giant Cadex 2 carbon composite frame with the aluminum fork. This is a 59 cm and is in good shape...it will need a new clear coat but the paint and decals underneath are in good condition. The lugs appear to have been painted. I bought the bike for the components. Price is $100. Trades are always a possibility.235525235526235527235528

Trades are the only possibility here.

Price is ---. Trades are required.235525235526235527235528Nice bike. Take your negotiations and prices to PM's please. This is a trade forum, not a sales forum. Thanks.

Did a cut and paste from a Craigslist ad for this item...forgot to take that part out.

Have:
-Campagnolo C-Record Delta calipers, 5th generation, 5 pivots, great condition, great pads.
-NIB FSA dual pivot calipers, normal reach.
-Shimano 105 single-pivot calipers in excellent shape.
-3TTT Podium bars, clean, but marred on the logos, double groove. 40cm, 25.4
-Weinmann 750 centerpull nutted calipers, with straps, and an extra 610, with strap. With 4 replaced pads.
-New Shimano 8-sp DT shifters, in box. Mounted and removed in favor of 9-sp.
-NIB Veloce 8-sp hubset, 36h
-No-wear Wolber GTX2 rimset, eyelets, 36h
-White SSM Regal w/brass rivets. Low mileage, but not new. I like it, but it doesn't match anything I have, uh,....right now. PENDING

ISO:
-9/10 105 or Ultegra STI's.
-Campy Chorus/Record/Daytona/Athena dual pivot calipers.
-Campy DT Syncro inserts, B7. May negotiate on a shifter set if needed. POSSIBILITY PENDING
-7sp freewheel, not wide-range but not a corncob, either. Shimano 600 preferred, or Regina, or even Campy.
-Black racing saddle. That means small and light, not comfortable. PENDING

And as far as facilitating some other parts, found in local LBS while cleaning the attic:
27.2 Record Ti seatpost. PENDING
27.2 NIB Record aero alloy seatpost with the words around the base...
27.2 NOS Chorus aero seatpost with the engraved logo on the side...
NOS Croce d'Aune long cage RD
used but very nice Record square taper crankset, with rings, 175mm/53/39.

EDIT: I have picked these up to sell for the owner and will move them to the FS thread.
I'll still entertain trades for them...

PM's preferred.

Seeking -

Campagnolo Electa Saddle in good shape
Campagnolo Ti Record Seatpost

Have -

multiple Brooks saddles - including white Brooks Pros (not the Tokyos) and tons of other misc. stuff. Campy aero cages and bottles come to mind.

Seeking -

Campagnolo Electa Saddle in good shape
Campagnolo Ti Record Seatpost


i really like the sound of what is to come

i really like the sound of what is to come

;)

;)

Would that be for the attractive titanium frameset on this page?

http://forums.roadbikereview.com/attachments/retro-classic/237806d1313335044-de-rosa-giro-ditalia-scan0001.jpg

Sort of...not entirely. The Electa will probably go on the Titanio, but it might go on the Marnati (depending on how much I like it)...I'm going to pull the ti record post in the Serotta to the Titanio and would like to get another to complete the Serotta.

Seeking -

Campagnolo Electa Saddle in good shape
Campagnolo Ti Record Seatpost

Have -

multiple Brooks saddles - including white Brooks Pros (not the Tokyos) and tons of other misc. stuff. Campy aero cages and bottles come to mind.We've talked. I may be interested in a Brooks, and the aero cages/bottles.....

We've talked. I may be interested in a Brooks, and the aero cages/bottles.....

Robbie - let me know! How did the SPs go?

Robbie - let me know! How did the SPs go?
Well, you now own the one you wanted. I'll try to get other photos up.

Have:

Atax stem, french diameter 22.0, not sure of the reach (120mm?) missing the mounting bolt for the clamp.

Orgin 8 horn bars, 26.0 diameter, gold anodized, about 40 cm wide

SR stem, 22.2 headtube diameter, 90mm reach

Suntour downtube shifters, nothing special but maybe some one needs them

Suntour lepree FD

Silca pump, black plastic, not sure if it works properly, just for show

Ventolux french pump, pretty beat up, does not work, just for show

Forte Gemini rear wheel, needs a cassette, out of tru

Need:

Campy FD and RD suitable for a 73' Raleigh International, NR or gran sport something like that

Campy English threaded bb (nr, record, triomphe)

Regina 6 speed freewheel

Campy NR headset piece, top race cup that is pushed in to the top of the headtube

open to other trades as well, just PM me for some pics or more info

Thanks!

-Harry

ISO
shimano 600 stem, headset and pedals

HAVE
shimano 105 crankset w/ generic BB (no chainrings)
shimano 105 RD
shimano 600ex RD (non indexed)
NEW VO fenders
I have some other stuff but can't think of anything right now

Have:
Dura Ace non-aero brake levers with hoods (hoods are a little old, but usable). Reasonably certain levers are BL-7400.

ISO:
Dura Ace aero brake levers (e.g. BL-7401, BL-7402)

I imagine that this might not be a super even trade, but I'm new to C&V and will be happy to work something out. :)

So, I'm moving across the country and need to get rid of most my bike stuff. I'm not concerned about trading my stuff for stuff of the same value, I'd just like to trade for things that I need. It's going to be tight moneywise getting out there, so if I can get my bike finished using little to no actual money, that would be great.

What I need: Consumables, mostly. A set of quality brake/shifter cables and housing. If someone has a set of jagwire sitting around, that would be perfect. Some brake pads inserts for standard v-brakes, preferrable Kool-stops. SRAM or Shimano 7/8 speed chain. Possible a set of 8 speed DT shifters.

What I have: A couple quill stems, a set of quill pedals, a Campy Chorus 175 crankset, Sakae triple crankset, Dia-Compe non-areo levers with gum hoods in great shape, Shimano cantilever brakeset, a really awesome fixed/free rear wheel (Its a Suzue hub laced to a Sun Chinook rim with 48 spokes!), A Mongoose ATB chromed frame, a small Trek 800 frame (has lowrider braze-ons and would be a perfect tourer) plus some other stuff I'm sure I'm forgetting.

I'm sure some of you guys have these things sitting around your shop, how about helping a friend out?

ISO:
---Campy NR seatpost craddle Left Side
---Campy NR seatpost bolts (two)
---Campy NR front derailleur (braze on)
---Campy brake lever pivot bushings (C-record era thru 10 speed ergos)
---Campy Record high flange rear hub 36h or record high flange hubset 32h
---Campy Record 10 speed crankset 170 with or without chainrings.
---Lower half of a Campy SR headset


Have:
---Campy Chorus Chainring (6?7?8? speed--C-record era) 50t NOS
---Campy Record 10 Speed Ultra Drive EPS Chainring 53t (to match a 39) Taken off a new crank...never used.
---Campy Record BB cups only, Thin Cups, Italian Thread, NOS
---Campy BB spindles (2) Pista, 109mm. One world logo 70-P-120. One Shield logo 70-P-120. Both NOS
---Campy Record low flange hubset 80s 36H, well used, no skewers
---Campy Record BB New 102mm Italian thread.
---Campy Triomphe Brake Levers NOS. But some minor scratches from storage, no hoods(mostly on the bodies)
---Campy pivot pins (2) for NR/SR brake levers (NOS)
---Campy BR-RE600 brake pads (4) new in sealed box
---Campy NR/SR crankset mounting bolts (3) w/washers (used)
---One Campy orphaned crankset dust cover (so-so shape)
---Various used Campy Record 9-speed rear deraileur parts (ask and I'll see if it's still there)
---Campy Right NR seatpost cradle
---Campy Chorus 8 speed dual pivot front brake, Nice shape. I have the matching rear, but one of the arms is cracked. I'll send it with the front if it's wanted
---Campy Chorus 9 speed Ergo levers. Used. I'm second (or third) owner so I don't know their history. Logos are well worn. Left works fine. The right side has some issues. The original body cracked, so I replaced it with a 10 speed body that has touched the ground. So the body has some scrapes. It shifts fine but a little soft. I replace the g-springs, but it's still soft. These are early 9 speed levers. So, if your thinking you can change the index gear...it won't work. The gear is designed slighly different. You would have to change the gear, thumb lever, thumb lever return spring, central pivot and some washers. But as I said, It shifts and stays in gear with no problems. It's just not crisp. And for full disclosure; one of the lever pivot bushings isn't original. No tears in the hoods.


---Cinelli XA stem handlebar clamp bolt w/brass washer (used-nice)
---Cinelli bar end plugs (black or silver) I have a few sets NOS
---Benotto tape in package 3 sets (yellow, green and pink)
---Look delta cleat mounting hardware (NOS)
---One downtube braze-on boss.
---American classic seatpost hardware (clamp, plate, bolt and adjuster screw) used
---American classic seatpost top clamp w/bolt used
---Rear dropout adjusters (new) no idea of manufacturer
---Ambrosio (brass?) plate from Excellence rim w/mounting bolt. Some people call this a wheel weight.
---Proline downtube cable adjusters (missing one mounting screw) I have no idea where these are from.
---4 Taiwan made master links marked T-subpin or Tava relief (no idea where these are from either)
---Cinelli Giro D'Italia Bars Winged C logo 64-40 Used. Nice shape but some light scratches in the logo area.
---TruVativ AM Giga Pipe Team SL BB 108x70, Italian Thread. New in box.
---Concor Supercorsa Confort Saddle (off an '85 Masi) OK condition. One tear on the left butt. It looks like it touched the ground. Also, there is rust on the rails.
---Mavic 550 R.D. Hubset 32h. Rough --These are well used. They've been through two sets of rims and bearings. The bearings in them are practically new. Skewers have some rust.
---Sachs Freewheel LY 95. It was a 7speed 13-21. Due to clearence problems, I ground the 13 tooth cog into a smooth ring and epoxied it to the 14 tooth cog. So it's now a 14-21 6speed.
---Parts of a Regina America Superleggera Freewheel. It was a 13-21 6 Speed. ISO thread. All that remains is: the body, the 13,14,15, 21 cogs and the spacers that go between the missing 17,19 cogs. It's a long story so I'll spare you.
---Regina CXs Cogs: 13(C1), 15(D1), 17(A2), 18(B1), 26(A1), 28(A1). They're on the outer body of a freewheel. All Used.
---Modolo brake lever clamps (2)
---Mavic RD pulleys (jockeys, bogeys)

Ok these parts are from a French POS I stripped. They are used and filthy and dinged-up:
---Reydel plastic covered saddle dated '71
---Weinmann type 730 brakeset w/levers w/turkey wings. Levers are missing the cable cups ( I don't know what to call them) on top.
---Simplex stem shifters
---Simplex push rod Front Derailleur
---Simplex rear Derailleur
---Atax Stem 22.0 dia. 90mm
---Chromed steel seatpost. I measure 23.88mm (24mm?)
---Suntour "Perfect" freewheel 6 speed 14-18

Will send pics upon request.
If you see something you want and have something interesting to trade..it doesn't hurt to ask.
Also, if you have something I'm looking for and you're looking for something not listed...again, it doesn't hurt to ask.

Have: Suntour Top pull clamp on front derailleur from mountain bike 28.6 (excellent condition)
Shimano 600 Ultegra braze on front derailleur (good condition)

Also Cateye Astrale 8 cycling computer. Great condition have everything except the cadence magnet.

Shimano 600 Ultegra braze on front derailleur (good condition)

Not positive but I think I have one somewhere... I'll check tonight

ISO - Nitto Technomic 120 mm stem

Have - Nitto quill stem, believe its a 100 mm
Rando bars, Campy stuff, etc.

ISO:
---Campy NR seatpost craddle Left Side
---Campy NR seatpost bolts (two)
---Campy NR front derailleur (braze on)
---Campy brake lever pivot bushings (C-record era thru 10 speed ergos)
---Campy Record high flange rear hub 36h or record high flange hubset 32h
---Campy Record 10 speed crankset 170 with or without chainrings.
---Lower half of a Campy SR headset


Have:
---Campy Chorus Chainring (6?7?8? speed--C-record era) 50t NOS
---Campy Record 10 Speed Ultra Drive EPS Chainring 53t (to match a 39) Taken off a new crank...never used.
---Campy Record BB cups only, Thin Cups, Italian Thread, NOS
---Campy BB spindles (2) Pista, 109mm. One world logo 70-P-120. One Shield logo 70-P-120. Both NOS
---Campy Record low flange hubset 80s 36H, well used, no skewers
---Campy Record BB New 102mm Italian thread.
---Campy Triomphe Brake Levers NOS. But some minor scratches from storage, no hoods(mostly on the bodies)
---Campy pivot pins (2) for NR/SR brake levers (NOS)
---Campy BR-RE600 brake pads (4) new in sealed box
---Campy NR/SR crankset mounting bolts (3) w/washers (used)
---One Campy orphaned crankset dust cover (so-so shape)
---Various used Campy Record 9-speed rear deraileur parts (ask and I'll see if it's still there)
---Campy Right NR seatpost cradle
---Campy Chorus 8 speed dual pivot front brake, Nice shape. I have the matching rear, but one of the arms is cracked. I'll send it with the front if it's wanted
---Campy Chorus 9 speed Ergo levers. Used. I'm second (or third) owner so I don't know their history. Logos are well worn. Left works fine. The right side has some issues. The original body cracked, so I replaced it with a 10 speed body that has touched the ground. So the body has some scrapes. It shifts fine but a little soft. I replace the g-springs, but it's still soft. These are early 9 speed levers. So, if your thinking you can change the index gear...it won't work. The gear is designed slighly different. You would have to change the gear, thumb lever, thumb lever return spring, central pivot and some washers. But as I said, It shifts and stays in gear with no problems. It's just not crisp. And for full disclosure; one of the lever pivot bushings isn't original. No tears in the hoods.


---Cinelli XA stem handlebar clamp bolt w/brass washer (used-nice)
---Cinelli bar end plugs (black or silver) I have a few sets NOS
---Benotto tape in package 3 sets (yellow, green and pink)
---Look delta cleat mounting hardware (NOS)
---One downtube braze-on boss.
---American classic seatpost hardware (clamp, plate, bolt and adjuster screw) used
---American classic seatpost top clamp w/bolt used
---Rear dropout adjusters (new) no idea of manufacturer
---Ambrosio (brass?) plate from Excellence rim w/mounting bolt. Some people call this a wheel weight.
---Proline downtube cable adjusters (missing one mounting screw) I have no idea where these are from.
---4 Taiwan made master links marked T-subpin or Tava relief (no idea where these are from either)
---Cinelli Giro D'Italia Bars Winged C logo 64-40 Used. Nice shape but some light scratches in the logo area.
---TruVativ AM Giga Pipe Team SL BB 108x70, Italian Thread. New in box.
---Concor Supercorsa Confort Saddle (off an '85 Masi) OK condition. One tear on the left butt. It looks like it touched the ground. Also, there is rust on the rails.
---Mavic 550 R.D. Hubset 32h. Rough --These are well used. They've been through two sets of rims and bearings. The bearings in them are practically new. Skewers have some rust.
---Sachs Freewheel LY 95. It was a 7speed 13-21. Due to clearence problems, I ground the 13 tooth cog into a smooth ring and epoxied it to the 14 tooth cog. So it's now a 14-21 6speed.
---Parts of a Regina America Superleggera Freewheel. It was a 13-21 6 Speed. ISO thread. All that remains is: the body, the 13,14,15, 21 cogs and the spacers that go between the missing 17,19 cogs. It's a long story so I'll spare you.
---Regina CXs Cogs: 13(C1), 15(D1), 17(A2), 18(B1), 26(A1), 28(A1). They're on the outer body of a freewheel. All Used.
---Modolo brake lever clamps (2)
---Mavic RD pulleys (jockeys, bogeys)

Ok these parts are from a French POS I stripped. They are used and filthy and dinged-up:
---Reydel plastic covered saddle dated '71
---Weinmann type 730 brakeset w/levers w/turkey wings. Levers are missing the cable cups ( I don't know what to call them) on top.
---Simplex stem shifters
---Simplex push rod Front Derailleur
---Simplex rear Derailleur
---Atax Stem 22.0 dia. 90mm
---Chromed steel seatpost. I measure 23.88mm (24mm?)
---Suntour "Perfect" freewheel 6 speed 14-18

Will send pics upon request.
If you see something you want and have something interesting to trade..it doesn't hurt to ask.
Also, if you have something I'm looking for and you're looking for something not listed...again, it doesn't hurt to ask.

I have a NR post I lost a cradle for and can't remember if I have the right or left. I MIGHT be able to assist here.

So, I'm moving across the country and need to get rid of most my bike stuff. I'm not concerned about trading my stuff for stuff of the same value, I'd just like to trade for things that I need. It's going to be tight moneywise getting out there, so if I can get my bike finished using little to no actual money, that would be great.

What I need: Consumables, mostly. A set of quality brake/shifter cables and housing. If someone has a set of jagwire sitting around, that would be perfect. Some brake pads inserts for standard v-brakes, preferrable Kool-stops. SRAM or Shimano 7/8 speed chain. Possible a set of 8 speed DT shifters.

What I have: A couple quill stems, a set of quill pedals, a Campy Chorus 175 crankset, Sakae triple crankset, Dia-Compe non-areo levers with gum hoods in great shape, Shimano cantilever brakeset, a really awesome fixed/free rear wheel (Its a Suzue hub laced to a Sun Chinook rim with 48 spokes!), A Mongoose ATB chromed frame, a small Trek 800 frame (has lowrider braze-ons and would be a perfect tourer) plus some other stuff I'm sure I'm forgetting.

I'm sure some of you guys have these things sitting around your shop, how about helping a friend out?PM sent on 8-sp DT shifters (NIB) and cables/housing, a trade.