Classic & Vintage - ISO and For Trade thread parts 2 and 3.

i have a 2007 fuji pro raod bike alum fram with carbon seat stays has full carbon fork size 54 would like to trade it for a old track frame have pics just send me a email and ill send them to you jerzeyjoe69@yahoo.com

Have:

Shimano FH-6500 32h rear hub - GONE
Tange black 1" threaded unicrown cromo 700c fork, 200mm steerer - GONE
NOS Araya Aero 2 polished, unmachined tubular rim, 32h
2 Super Champion Gentleman 700c rims, clincher, 36h - GONE
Selle Italia Flite with titanium rails - older style from the 90's, again well-worn but functional
1971 Triumph 3-speed - very heavy, so probably only of interest to any locals
Shimano Deore XT 32h hubset
Kalloy Laprade seatpost, 25.8x350mm
Thomson Elite seatpost, 26.8x410mm
2003 KHS Alite 500 MTB frame, 17" center-to-center, includes brand new replaceable derailleur hanger


Want:

Shimano Ultegra rear brake, BR-6500 or -6600
Brooks Pro, Swift, or Swallow, preferably in black
brown leather saddle - Brooks, Ideale, etc., not as picky about model
gum hoods for Shimano non-aero brake levers
MKS GR-9 pedals
FSA MegaExo cup wrench
SKS Raceblade fenders

Have: Paypal Account......?

Want/Need: Shimano 600 long cage RD (1985ish) All silver/polished type, which still has the exposed chrome allen bolt head on the cage pivot, but with the smooth sculpted design. I have a short cage that I can try and convert, but it's on the SR Maxima and I don't want to break the group up.

This is a fairly rare derailleur in my experience so far. If it can't be found, I guess I will go all the way with 90's Deore XT, which I have a few pieces of. I have the correct FD, and friction 600 shifters. Just need a long cage RD....


Man, try saying "fairly rare derailleur" fast three times, lmao!

HAVE:
English-thread Dura-Ace 7800 BB. Also have a second which has some wear on the ceramics.

http://www.jaysmarine.com/DAbb1.jpg

http://www.jaysmarine.com/DAbb2.jpg


WANT:
Pretty flexible, but I do not want cash.

-Kurt

Looking for a set of down tube shifters, campy synchros, shimano dura ace 9 would work. New if possible.

What do you need? Have some track stuff, a new set of rollers, some road stuff.

THanks.

anybody interested in an old late 50s ladies 3 speed ?

I have NOS steel Tange unicrown MTB fork, 240mm steer tube, unpainted:

http://os2.dhs.org/~john/tange-mtb-fork.jpg

Stronglight 93 crankarms, 170mm, 9/16 x 20TPI:

http://os2.dhs.org/~john/stronglight93-arms.jpg

I want: Lyotard #23 "Marcel Berthet" pedals, 9/16 x 20TPI, Zeus chainrings 36T -50T.

Needing for a '78 Fuji S10-S restoration:

Suntour V-GT rear derailleur
Suntour Compe-V front derailleur
OR
Suntour Cyclone F&R derailleur, late '70s vintage

geekWill a '78 Superbe suffice? It's missing the hanger bolt, but otherwise nice. No front derailleur. I might have a the V-GT in pair, but need to do some digging to confirm.

JohnD, I think I have those pedals. I can't find 23 on them, but they have: Made in France and Berthet Lyotard on them. In pretty average shape, smooth, with dust caps present. Appears that the tabs may have been bent down, or that's just how they are. Do you have a photo I could use for comparison?

I have NOS steel Tange unicrown MTB fork, 240mm steer tube, unpainted:

http://os2.dhs.org/~john/tange-mtb-fork.jpg

Stronglight 93 crankarms, 170mm, 9/16 x 20TPI:

http://os2.dhs.org/~john/stronglight93-arms.jpg

I want: Lyotard #23 "Marcel Berthet" pedals, 9/16 x 20TPI, Zeus chainrings 36T -50T.


:eek::eek: beautiful bike parts on a 9"x9" asphalt asbestos tile floor!! Be careful with that stuff if it gets broken up.

Okay, here they are, one is definitely bent a bit, otherwise pretty good, dustcaps could use a polishing, everything else just WD-40 and a toothbrush.

I'll try again to obtain two of these elusive barrel adjusters for Campy NR/SR brakes. A few months ago a NOS set went for something like $35 on Ebay.

See my for sale link below for potential trades; or the forbidden medium..

http://www.fivenineclimber.com/images/cinelli/IMG_8479.jpg

I'll try again to obtain two of these elusive barrel adjusters for Campy NR/SR brakes. A few months ago a NOS set went for something like $35 on Ebay.

See my for sale link below for potential trades; or the forbidden medium..

http://www.fivenineclimber.com/images/cinelli/IMG_8479.jpg

Hi Jan

You can get all three adjuster components (post, nut, rubber) at Cafe de Velo (http://www.cafedevelo.com/index.php?act=viewCat&catId=87) for a total of $22.98 +shipping.


stan

:eek::eek: beautiful bike parts on a 9"x9" asphalt asbestos tile floor!! Be careful with that stuff if it gets broken up.
Parts is parts:

http://os2.dhs.org/~john/parts.jpg

:)

Will a '78 Superbe suffice? It's missing the hanger bolt, but otherwise nice. No front derailleur. I might have a the V-GT in pair, but need to do some digging to confirm.

Thanks, but I found what I needed from another C&Ver!

geek

Have:

Campy Victory 53/42 double crankset with Campy 109mm bottom bracket. Both in excellent condition.

Need:

Shimano Dura Ace EX 36 hole high flange freewheel hubs (looks like a six pointed sheriff's star).

geek

Have:
31.8 New Campy Mirage double FD, black/silver
braze-on New Campy Mirage triple FD (Mirage T) silver
31.8 carbon-look clamp for braze-on FD
31.8 Felt clamp for braze-on FD
34.9 Shimano clamp for braze-on FD
Mint Cinelli 66-38 bar, no grooves
NOS white Shimano 105 hoods
31.8/44cm Eleven81 bar
31.8/42cm Forte Precision bar
120mm Cannondale 1"/1" threadless stem

Need:
28.6 clamp-on Campy double FD
Campy cable set for Ergos (2)
Grey brake cable housing
Grey shifter cable housing
Campy cassette lock ring (9-sp)
Campy 9-s cassette

I am thinking about a new(er) bike... dont know yet.. what can i get for trade for my 72 Fuji Newest. This was one of the top end bikes back in the day... Ive put 700c sun rims (rear needs trued-small flat spot) , new bontrager tires (200miles), new cables, new cassette- now 14 speed bike, seat, wrap, nos cant remember brake handels, etc.. For the most part- the bike still has most of the original parts.. frame is very nice.. i was told the bike was for a 6'1-6'4 guy, im 5'11.. still ride it.. dont care.. i probably need a 54-56cm frame..

http://i287.photobucket.com/albums/ll142/Bigblock4-speed/X-mas08andFuji053.jpg
http://i287.photobucket.com/albums/ll142/Bigblock4-speed/X-mas08andFuji052.jpg
http://i287.photobucket.com/albums/ll142/Bigblock4-speed/X-mas08andFuji051.jpg
http://i287.photobucket.com/albums/ll142/Bigblock4-speed/X-mas08andFuji050.jpg
http://i287.photobucket.com/albums/ll142/Bigblock4-speed/X-mas08andFuji049.jpg

Parts is parts:

http://os2.dhs.org/~john/parts.jpg

:)

Welcome John!

If you guys find a late 70's, early 80's Trek with "Z" on the chainstay bridge - it's quite possible this guy built your frame.

Need a Dura Ace 27.2 alloy seatpost, SP-7410 (I think.) The aero style, not the Easton alloy style. Thanks.

Need a Dura Ace 27.2 alloy seatpost, SP-7410 (I think.) The aero style, not the Easton alloy style. Thanks.

Is that the one with the little adjusting screw in front?

Welcome John!

If you guys find a late 70's, early 80's Trek with "Z" on the chainstay bridge - it's quite possible this guy built your frame.

John built my Trek 770, and if I recall correctly built the Trek 170's.

and yes, Welcome John!

Marty

Is that the one with the little adjusting screw in front?

Yep.

edit: Like this one (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=160307808568&ssPageName=STRK:MEWA:IT&ih=006), but not sold already.

John built my Trek 770, and if I recall correctly built the Trek 170's.

and yes, Welcome John!

Marty

Trek 170....Drrrooolllll. One of my dream bikes.

Mutt

http://i10.photobucket.com/albums/a108/upperclasstwit42/DSC_0040.jpg
http://i10.photobucket.com/albums/a108/upperclasstwit42/DSC_0043.jpg
http://i10.photobucket.com/albums/a108/upperclasstwit42/DSC_0045.jpg
frame is well loved, both wheels are new.
looking for interesting offers

..

John built my Trek 770, and if I recall correctly built the Trek 170's.

and yes, Welcome John!

Marty

Thanks...

I didn't build all the 170s, there were 3 of us working together building them. But they are/were darn nice bikes. I was talking to Kelly Gamble last year (one of the other 170 brazers; hadn't seen him in years) and he told me he still has a new, unbuilt 170 frame in a box at home!

Have:
52cm Ironman 1989 Master frame set only, Tange Levin CD headset to go w/fork. No bb, sorry.
Avg condition, and I'll clean it up well. I'll probably include a Nitto stem and bars, maybe a seat post, not much else.....

Need:
Alex black rear wheel w/Shimano hub 700c.
or
Black FG or SS rear wheel 700c with some "v" to it.

seeking: 3TTT Record 84 stem

Just remember... i have a set of True Temper tubing the usual 09 series with lugs and campagnolo track dropouts. Cinelli fork crown. I would love to sell it but if anybody has a nice italian frame in 55 or 56 to offer i'm open to conversations. What do you have?

Thanks.

Thanks...

I didn't build all the 170s, there were 3 of us working together building them. But they are/were darn nice bikes. I was talking to Kelly Gamble last year (one of the other 170 brazers; hadn't seen him in years) and he told me he still has a new, unbuilt 170 frame in a box at home!

My unending admiration for your work, but still be careful with that tile flooring.;) If your mate Kelly ever wants to sell that boxed frame, please add me to the list of folks who would sell their soul for a shot at it.

Wanted: New or lightly used 1" threaded silver headset, such as Ultegra, Dura Ace, Campy Record or Stronglight A9. Chris King is probably ought of my range, but make feel free to me an offer if you've got one for sale.

Oh I forgot

a Primax Seatpost 27.0 would be nice as well
http://fstatic1.rennrad-news.de/img/photos/2/5/3/4/1/_/medium/PM2.JPG?0

regards

How about a photo of the actual seatpost?

+1

Have:


Need:

Campy cable set for Ergos (2)
Grey brake cable housing
Grey shifter cable housing


You might want to take a look at these (http://www.probikekit.com/display.php?code=A0058), I ordered a set , looked like a pretty good deal.

I have a nice and complete Green Schwinn Varsity. Got it in a bulk bike buy. Haven't done anything to it, but ride it down the street. Needs usual clean, lube, truing, adjust, replace tires. Bearings spin good. Rims need trued (a little wobble, not bad), chain not rusty. Original seat. Not wrecked in anyway. Rims look good. General thrift store Varsity.

What I need is a "red wine colored", Schwinn 'World Sport' frame. I've got one I've been doing a clean & lube on and noticed the frame is bent. Its not too bad and could be straightened using sheldon browns 'long 2x4 method', (both rear stays are bent to the right), but I'd rather get an un-wrecked better frame.

Anyone need a varsity that can trade me?

Each individual pays shipping for what each receives.

I'm in Omaha, NEBRASKA if you want to come by.

You might want to take a look at these (http://www.probikekit.com/display.php?code=A0058), I ordered a set , looked like a pretty good deal.

Thanks loads. I ordered a couple of sets, a spare 8s cassette, some bar wrap and a Descent tri suit.
FREE SHIPPING, too. The total price was about 1/2 what the tri suit goes for here.

Thanks loads. I ordered a couple of sets, a spare 8s cassette, some bar wrap and a Descent tri suit.
FREE SHIPPING, too. The total price was about 1/2 what the tri suit goes for here.

Oh noooooooooooo!!!!!!!!!!!!!!!!!!

Have: (among other things)(sorry not much of it vintage :( )

BIG MEAT cleat wedge sets (2) for SPD
27.2mm carbon LP seatpost
polished aluminum threadless stem 1 1/8"
NIB U-lock bracket kit (for attaching your lock to your frame)
1 ea--Joytech front hub laced to 700c Hoopster clincher rim, used. w/reflector. nearly true, includes rim tape--needs cleaning. quick relead axle, QR skewer not included, sorry
1 ea--Steel 26" wheel, hub repacked. clincher rim, clean, nutted axle
1 ea--steel 26" rear wheel, threaded hub, Straight side rim. nutted axle
3 ea--Kenda 24 x 1.75 (ISO 507mm)semi-slick
1 ea--Skinwall 24 x 1 3/8 (E-5)(ISO 540mm) slick. this is a british juvenile bike tire or a wheelchair tire
4 ea (one down, 4 to go!!)--Pyramid 26 x 2.125 whitewall (ISO 559mm--for cruiser type bike)semi-knobby
1 ea--Kenda 700 x 50c (ISO 622)semi slick w/side knobs for grip in turns
2 ea--Kenda 24 x 1.95 knobbies
1 ea--Kenda 700 x 40c (ISO 622)street slick--a nice fat tire
4 ea (3 white, 1 black)--Kenda 16 x 1.75 (says "to fit H/E rim" on sidewall) (ISO 305mm) all 4 knobbies--2 whites match exactly, third white tread matches black tread. no clue why!--for childs BMX or folding bike
1 ea--Hutchinson (European juvinile--made in France) Skinwall ISO 340 "400 A BALLON" written on sidewall
2 ea--Kenda 14 x 2.125 black knobbies
1 ea--HSiN Black street slick 16 x 1 3/4 "to fit S-7 Schwinn tubular rims" written on sidewall
1 ea--Kenda "K-103" 14 x 1.75 black semi slick
Marin saddle, nothing special, but its new
WTB SST saddle, new
New Shimano Alivio FD, downswing for triple. low clamp
Blackspire 22 tooth, 58mm BCD, 5 hole silver alloy--new in package
Shimano 22 tooth (M9 N-22) 4 hole, 64mm BCD. New, no package, probably removed from a new bike
Shimano 26 tooth (SG G-26) 5-hole, 74mm BCD. another that was, i suspect, removed from a new bike before it was used much--no noticeable tooth wear.
Kool Stop model RK-1 bike trailer conversion kit (converts Kool Stop trailer into a stoller) all the parts are there, and its NIB
an old 26" wheel from a 3 speed, w/ 3sp shimano coaster brake hub. dirty byt serviceable.

WANT:

-sidepull calipers w/quick release, mid quality is ok, dia compe, etc...better is better. not too picky as long as they have the QR and aren't super cheap. somewhere in the 55-75 mm reach range. (for mid '80's)
-a fixie rear wheel, 27" or 700, flip flop if possible but not nec.
-a comfy gel seat for my GF's new bike. something cozy but not geriatrically so. if ya know what i mean.

i'll send pics on request! thanks, ff baaahhhh.

WTB/NEED:

Shimano Octalink (v1) bottom bracket, English thread for Ultegra double crankset (will check length). With or without left-hand lockring.

-Kurt

WTB/NEED:

Shimano Octalink (v1) bottom bracket, English thread for Ultegra double crankset (will check length). With or without left-hand lockring.

-Kurt I don't have one, but the last one I bought was under $14 at Loose Screws, and it was Shimano.

I don't have one, but the last one I bought was under $14 at Loose Screws, and it was Shimano.

Just checked. All the sub-$20 BB's are Octalink V2's, and the only V1 that they have (the 105's 5500, which would work), is $38.25 :roflmao2: :cry:

-Kurt

bw286 - what size is that Raleigh? I had one as a kid & loved it...might have to make that the base of my fixie project.

Thanks

got this NOS hub set: American made, but not sure if they are Cook Bros or somebody else (all markings are gone). They are very substantial, I might say "nuke proof" but that's another story, too. The flanges are approx. 62mm diameter; 36-hole drilling; the rear is 130mm spacing and takes a threaded freewheel; the center barrels are some kind of carbon fibre. Very high-grade sealed cartridge bearings (marked KSK, Japan), the QR skewers are very like American Classics, but I don't think they made these hubs. I'm not ever going to build a vintage Mtn. Bike wheelset, nor a touring set out of these (as I intended) but sure would like a pair of 28-hole black hubs with 126mm rear spacing...either FW or Shimano freehub...equivalent quality for a straight-across trade or we'd have to talk about a bit of $.
PM me with what you've got, and if anybody can tell me what they are: THANKS in advance!
http://i55.photobucket.com/albums/g135/unworthy1/black%20hub%20set/BK_Hubs_1.jpg
more pics in this photobucket album: http://s55.photobucket.com/albums/g135/unworthy1/black%20hub%20set/
Well, those are American Classic skewers, and other than the different color center section, the hubs look to be Am Classics, too. I'm guessing that someone along the line buffed out that center section.

1988 Specialized RockHopper. Frame, Fork, and probably whatever bits I don't remove. Paint is shot, small 1/8 ding on toptube. no major rust or structural damage. Canti mounts on fork are shot. Don't have time to build this project how I want. Pic is of whole bike, this is for frame/fork. PM for more pics. 18" C2T, 20" toptube, 30" standover with 26X2.35

http://i434.photobucket.com/albums/qq61/rotharpunc/GEDC0004-1.jpg





I'd like a set of dura ace 7400 cranks in 170, 7400 dura ace calipers, or dura ace aero non brifter levers, but I'm up for any interesting trade ideas:thumb:

Just checked. All the sub-$20 BB's are Octalink V2's, and the only V1 that they have (the 105's 5500, which would work), is $38.25 :roflmao2: :cry:

-Kurt
That's the one I bought, for a black 105 crank set. Quite a while ago. Sorry

actually based on my little research I'm fairly sure that they ARE Cook Bros. Racing hubs (those Am Classic skewers were sold separately, after all) and since I'm impatient I've gone and eBay-ed the pair...so I'll delete the original swap offer, thanks for looking.

I have Avocet/Ofmega 175mm crank arms (144mm BCD); drilled for triple rings:

http://os2.dhs.org/~john/avocet175.jpg

I need similar quality/condition crank arms in 165mm, Zeus chainrings 36T - 50T, 144mm BCD chainrings 43T or 47T. TA 5-pin outer chainrings 42T - 50T. TA 5-pin crankarms 165-170mm.

I am looking to trade my Trek 520 for a mid 80's Miyata 1000.
I have decided that since this Trek is new, I would rather trade it to someone who will ride it or keep it as a collectable. I would believe that this is the best example of a late 80's 520 anywhere.
I really believe that it should probably be preserved but that may also be a waste.
http://i23.photobucket.com/albums/b400/fj40/DSC02303a.jpg
http://i23.photobucket.com/albums/b400/fj40/DSC02314.jpg

Trying to sell my Ciocc. This is the bike I almost got scammed on trying to sell on Chicago CL. 56cm seat tube, 55cm top tube. I would trade for a similar bike 58-60cm, sell outright, or do a partial trade for a steel bike of the latter size with good tubing. I would sell/ trade for the frame and fork, with the Shimano STX headset and Campagnolo Centaur BB that's are installed. Both were new when I installed them. I've ridden the bike about 20 miles since. If you want a full listing of the parts on the build, send a PM.

http://lh5.ggpht.com/_NhTmv38HQSo/SWezc43yXbI/AAAAAAAABv0/g2OOtbUDAeE/s720/DSC01625.JPG
http://lh6.ggpht.com/_NhTmv38HQSo/SWevl5LPDFI/AAAAAAAABs8/nncUTdL2dPg/s720/DSC01614.JPG
http://lh3.ggpht.com/_NhTmv38HQSo/SWevnpol1zI/AAAAAAAABtE/EQnLAtVCzaI/s720/DSC01615.JPG
http://lh3.ggpht.com/_NhTmv38HQSo/SWevpbnq-NI/AAAAAAAABtM/G0SK1J91Isk/s720/DSC01616.JPG
http://lh6.ggpht.com/_NhTmv38HQSo/SWevrud4f8I/AAAAAAAABtU/dtXQefAonfI/s720/DSC01617.JPG
http://lh5.ggpht.com/_NhTmv38HQSo/SWevtsp_YJI/AAAAAAAABtc/Qs13xTmJlnA/s720/DSC01618.JPG
http://lh5.ggpht.com/_NhTmv38HQSo/SWevxU7IiII/AAAAAAAABts/SK7HvbTDbyw/s720/DSC01620.JPG

Also have these pedals, I think they're Campagnolo Victory, with the Cinelli Gran Cidismo toe straps and Campagnolo clips, size Medium-Large.
http://lh3.ggpht.com/_NhTmv38HQSo/SWev2jqRSPI/AAAAAAAABuE/ZcXDE6uZ7GQ/s720/DSC01623.JPG
http://lh5.ggpht.com/_NhTmv38HQSo/SWev4syrNtI/AAAAAAAABuM/RWRAgsk5S4Q/s720/DSC01624.JPG

And I have some MKS AR-8 pedals with MKS clips and straps, size LL, that came off a Bridgestone RB-2.

WTB:
SR mte-100 adjustable seatpost as pictured below.

http://farm4.static.flickr.com/3363/3183341588_a9f3bf30f6.jpg