Classic & Vintage - ISO and For Trade thread parts 2 and 3.

ISO:

sealed bearing road wheelset 126/100

have:

lots! send me a PM

ISO:

Stuff to build a wheelset.

DA hubs
Spokes
Cool rims...

Have:
70's Lyotard Berthet pedals. English size. Just cleaned the races and repacked the bearings yesterday, they spin nice and smooth. With or Without Toe Clips and straps.
Nervar 52/40 Cottered Double Crankset w/ original BB Spindle. Accepts English Threaded pedals.

Looking for:
Some other kind of wider pedal, MKS Quill, Atom 700, Suntour Cyclone, etc. No clipless.
High Flange hub set - 126 or 120mm spacing, non-Campagnolo.

please PM me if interested, I always forget to check this thread

ISO:
-Upper pulley spring (main spring) for 1st generation Suntour Cylone or
-Suntour Cylone GT RD
-Nice 26.8mm seat post (Campy or similar)

Have:
Raliegh branded
-SR Randonneur bars
-Suntour Vx RD
-Suntour Vx FD

have:
- mks sylvan track pedals
- 700x28 specialized armadillos with plenty of life left
- cinelli frog stem, light scratches, 26.0 clamp

trying to get:
- good 700x32 tires. preferably non-pasela TGs (bad experience). more like vittoria's touring stuff, schwalbe marathons, contis, armadillos, etc
- the wider mks touring pedals
- albatross/dove/swept back bars
- VO threadless stem adapter (always useful!)

...down the page.

Still ISO:

-1st Generation Dura Ace in BLACK 46T chainring AND high-flange rear hub
-Campy SR non-areo brake hoods, also black
-Older, well used Brooks professional Saddle (to match the patina of a '79 Competition GS)
-49T outside chainring for the original Deore road group
-one of those dynamo/generatiors that attches to the chainstays where a kickstand would normally go
-proper road-trip SR crank (with chainrings) for 84 Trek 520, the one with the sort mag style outer ring that they fancied on many of their bikes
-always a sucker for canvas bike bags
-actually looking for a couple of newer Ortlieb items


Have an entire barn full of stuff...some it it you might even want....like (and this is just a sample):
-DA 7400 hubs
-NOS Shimano 600 Arabesue double cranks (170mm, 52/42)
-a box full of other Shimano 600 stuff, some tri-color, some older
-enough Suntour bar-end shifters to outfit the enitre Tour de France (ok, maybe not that many, but a box full)
-an equal amount of MAFAC brake parts
-Lampert badged TA triple cranks
-Campy Gran Sport derailuers, in a variety of flavors
-NIB anodized Dia Compe BMX brake parts in gold, red or blue
-an odd assortment of plastic Simplex derailuer bits, some of them are not even broken yet
-a set of Park drop-out alignment guage/bendy things, as well as a Park FRS(?) big frame bendy tool
-a large collection of fair-to-marginal new Specialized 27-inch tires from the mid-80's
-blue label Super Champion rims to match the 27-inch tires
-Suntour command shifters, six-speed I think, NIB, I think with cables and all
-ALOT of mid-range suntour drivetrain bits, some NIB, some not
-well used Superbe Pro rear derailuer, I think I have brakes too.

I do not see how all of you can resist this stuff. Now, go find me some black-anodized 1st generation DA bits!

Have: First generation super record seatpost 27.2 that's two bolt.
and many MANY other things, click my signature link below, but this seems the most fitting trade item from my wanted items.

Want:
-27.2 or 27.0 syncros titanium seatpost
-27.0 thomson elite seatpost silver, 250mm 0 offset naturally.

ISO:

Shimano 600 tri-color crank 170mm

54ish cm touring frame/complete bike/partial build

Still ISO:

-1st Generation Dura Ace in BLACK 46T chainring AND high-flange rear hub
-Campy SR non-areo brake hoods, also black
-Older, well used Brooks professional Saddle (to match the patina of a '79 Competition GS)
-49T outside chainring for the original Deore road group
-one of those dynamo/generatiors that attches to the chainstays where a kickstand would normally go
-proper road-trip SR crank (with chainrings) for 84 Trek 520, the one with the sort mag style outer ring that they fancied on many of their bikes
-always a sucker for canvas bike bags
-actually looking for a couple of newer Ortlieb items


Have an entire barn full of stuff...some it it you might even want....like (and this is just a sample):
-DA 7400 hubs
-NOS Shimano 600 Arabesue double cranks (170mm, 52/42)
-a box full of other Shimano 600 stuff, some tri-color, some older
-enough Suntour bar-end shifters to outfit the enitre Tour de France (ok, maybe not that many, but a box full)
-an equal amount of MAFAC brake parts
-Lampert badged TA triple cranks
-Campy Gran Sport derailuers, in a variety of flavors
-NIB anodized Dia Compe BMX brake parts in gold, red or blue
-an odd assortment of plastic Simplex derailuer bits, some of them are not even broken yet
-a set of Park drop-out alignment guage/bendy things, as well as a Park FRS(?) big frame bendy tool
-a large collection of fair-to-marginal new Specialized 27-inch tires from the mid-80's
-blue label Super Champion rims to match the 27-inch tires
-Suntour command shifters, six-speed I think, NIB, I think with cables and all
-ALOT of mid-range suntour drivetrain bits, some NIB, some not
-well used Superbe Pro rear derailuer, I think I have brakes too.

I do not see how all of you can resist this stuff. Now, go find me some black-anodized 1st generation DA bits!

http://www.bikeforums.net/showthread.php?529879-Cyclotoine-s-parts-bin

hes got some 1st gen hubs.

Have Bits and Pieces i dont want or need. modolo pro brakes. cinelli bar and stem. giepiemm i crank set. campy pedals.

want:

- TA pro 5 vis crank arm (50.4 BCD), 170mm (left side only). french or english pedal threading is fine.

have:

- nitto stems
- various drop bars
- various seat posts
- NOS sturmey archer parts
- ideale 80 saddle
- various road pedals
- lots of other various bits
- various RDs (mostly touring)
- cash

May be a long-shot, but...

ISO:
Dura-ace 7-speed brifters (ST-7400).

Don't have much to trade, but can pay a fair price.

May be a long-shot, but...

ISO:
Dura-ace 7-speed brifters (ST-7400).

Don't have much to trade, but can pay a fair price.
I could be wrong, but 8-sp was their earliest.
7-sp would be RSX and you can still buy Sora 7-sp....

I may be the only post ever asking for a set of these, but I need of set of friction stem shifters for a build for a friend who is getting into riding and uncomfortable with the DT idea.

Plenty of parts and consumeables to trade.

I may be the only post ever asking for a set of these, but I need of set of friction stem shifters for a build for a friend who is getting into riding and uncomfortable with the DT idea.

Plenty of parts and consumeables to trade.

Something I can finally help with...I've got a couple pairs!
PM sent.

ISO:
1980s Peugeot high-end competiton bike. 54-56 cm, original wheels are okay, but i don't like tubulars.

i'll trade you the 83 px-10 that i have now - it's a 52 cm rolling on ultegra/open pro clinchers. still have most of the original parts (not the wheels, unfortunately).

PM me with questions or for pictures.

ISO - Fixed Fork for Trek Antelope. (Steer tube is 1" threaded with about 6.5" long headtube on bike)

ISO a single brake spring for a GB coureur 66 brake. Please

Originally Posted by txvintage
I may be the only post ever asking for a set of these, but I need of set of friction stem shifters for a build for a friend who is getting into riding and uncomfortable with the DT idea.

Plenty of parts and consumeables to trade.


Thanks everyone. I'm all set.

The kindness and helpfulness of our community never ceases to amaze me.

OK, this is a huge longshot. Does anyone have a Silca Magnum pump? I've never seen one, but I'd like one for the car.

Willing to trade whatever. I have a few parts around, and some other stuff. Let me know what you need, or what other stuff you'd want.

ISO:
Anyone have a spare spring for a centerpull brake? I have a brake with one loose spring that provides no resistance. It looks like this (not my picture):

http://farm4.static.flickr.com/3015/2686565833_cd6f7922f2.jpg

I could be wrong, but 8-sp was their earliest.
7-sp would be RSX and you can still buy Sora 7-sp....

Thanks, Robbie. I'm sure you are right about the part number. I'm not too familiar with Dura-Ace parts, but I do have a 7400 RD, no shifters, and some badly scared brake levers, so I thought this might be a good time to try out brifters (actually my first foray into anything other than friction downtube shifters.) My understanding from some other BF threads is that the Dura-Ace derailleurs are only compatible with Shimano/Dura-Ace shifters, or maybe it's the other way around?

In any event, still ISO of 7sp Dura Ace brifters...

some other BF threads is that the Dura-Ace derailleurs are only compatible with Shimano/Dura-Ace shifters, or maybe it's the other way around?

In any event, still ISO of 7sp Dura Ace brifters...

you can pretty much use any derailleur with any shifter set (well so long the derailleur in question is fairly modern, some people have got some early 80s stuff working, albeit not as good as something newer), its the cassette which will raise issues, the spacing the dura ace 8 speed brifters will push/pull is a bit different from the ultegra 600 and 105 (and rsx). As stated previously stated there is no such thing as 7 speed dura ace sti style shifters.

ISO Mavic Rim (w/ or w/out hub) I'm not sure what the model is but, it's the one w/ the green and yellow sticker with a "cardiac rythym" on it

Have please see previous posts

Sombody not too long ago was looking for a right Campagnolo rear dropout. I found these today:

http://i136.photobucket.com/albums/q184/balindamood/Bike%20Posts/DSCN0225.jpg

ISO Mavic Rim (w/ or w/out hub) I'm not sure what the model is but, it's the one w/ the green and yellow sticker with a "cardiac rythym" on it

Have please see previous posts

I might be able to help, but I need more info (size, type, spoke count, pic of the label, etc).

ISO Mavic Rim (w/ or w/out hub) I'm not sure what the model is but, it's the one w/ the green and yellow sticker with a "cardiac rythym" on it

Have please see previous posts

I have a complete NOS front wheel (27X1.25) on a wheel with less than 5 miles on it. My wife was using to escort the dogs to park across the street for a while

I guess size would help.... 700c x 1.4cm (measured from inside lip to inside lip). Here's a picture of the label
http://i677.photobucket.com/albums/vv138/bimmerpnk/4runner/Bikes/002-1.jpg

That 27"er might work for a project in my mind.... (don't have it yet but I can day dream)

ISO:
Dual pivot standard reach brakes
Decent 170mm double crankset and english BB
Set o' fenders
Shorter 90-100mm stem (cinelli preferred)
Cane-Creek, or equivalent brake levers, the newer fatter ones
Broken Campy Ergo shifters: 9 or 10 speed; I recently rebuilt a pair and they run flawlessly so looking for another set for another bike
Campy C-record era (other models will work) 170mm left crank arm
matching silver 32hole 700c rims for clincher
6 speed freewheel
56-57cm frame/f with monostay rear
56-57cm American steel frame/f


Have:
Campy N.R. brakeset with flat levers
Campy N.R. brake levers, hoods are a little rough but still rideable
N.R. 36 hole front hub
Campy C-record clamp on front der.
Shimano 170mm 6206 triple crankset with bio-pace rings
Shimano Deore front and rear derailleurs (long cage), second generation I believe
2 Mavic 36hole GP-4 tubular rims, anodized gray
Brand new Dura-Ace 7900 front derailleur, clamp on
Brand new FSA SL-K light crankset and BB, 170mm
57cm Vitus 979 f/f pink
55cm Somec f/f

Most of the parts I am looking for are going to be powder-coated so the appearance is not overly important; I will be stripping and polishing them. I can get pics of anything. Cheers,

WjV

ISO:
Aero Brake Levers of decent quality
Side Pull Brakes, standard reach, of decent quality

Have:
Shimano 600 (tri-colour) 7 Speed Downtube Shifters
Fizik Aliente Sport Saddle
Shimano 105 10 Speed FD bolt on
$$$

Looking for a 165mm crankset. Sakae or similar. I have a Sakae 170mm crank set and a bunch of other parts for a possible trade.

For Trade:

GONE

Looking for:

FOUND

I know frame trades are expensive, but it can't hurt to try!

ISO: (in addition to stuff i posted a page back)
technomic deluxe 25.4 clamp, 110 or 100mm length
a 54ish cm frame for a conversion. preferably without DT bosses, and hoping for something classy/british-looking (with non raleigh bb threading!)
brooks b17

Hi

I'm looking for a light blue Stan Pike frame. Somewhere between 52-55 cm range. I lost an eBay auction for one of these a year ago and I have yet to get over it, so I'm just going to
put it out there and see if anyone's got one they're looking to sell. What I'm after is pretty much identical to this chap's nice set up: http://www.flickr.com/photos/topcatjamesclark/4258298110/ (I hope that it's ok that I post this link to give folks an idea)

I'd also be willing to trade my Zeus road bike with Campy dropouts/fork ends with Zeus Criterium/2001 components for a full set up, or partial trade for frame/components.

Thanks

Have:
27.0 fluted SR seatpost
Among some other things, but most of my stock is cleared out at them moment.

Need:
27.0 non fluted seatpost (aesthetics) Nothing fancy a Kalloy would do.

Thanks,
Jake

Looking for

1 inch fork - chrome columbus steel would be nice. for a 57cm frame.

1 inch threaded headset - nice condition

have: some bike parts

Have
Dura Ace 7700 Braze On front derailleur
Want
Dura Ace 7700 28.6mm clamp on model

also have
Braze on shimano 105 double front derailleur, it's an older series, can't remember off the top of my head. sort of a greenish look to the annodizing
Campy Braze on Downtube shifters with cable guides. (I think they're some form of record from what i've seen)

Looking for
cinelli or 3ttt, non-panto'd stem with 26.4mm clamp. 110mm length and up
27.2 mm seatpost... 600/ultegra, dura ace, easton, etc.

Campy NR pedals with Christophe clips and straps. Would trade for a nice set of Look clipless pedals.PM sent ...

Looking for used Bruce Gordon half clips, size small.

Titanium or Stainless, it doesn't matter...just so long as the price is attractive when compared with what they sell for on his site.

Have: Campagnolo 1st generation c record rear derailleur excellent cond
Colnago toe clips (meatal toe clips with the clover on them

Trade: ??????????????/

Putting out feelers for a pair of Shimano aero brake levers. SLR-ish would be great.

ISO: Dura Ace aero brake levers, or equivalent quality aero levers.

Have: lots of mid to high end road and mtb parts.

Updated with pics!


Want:

- Quality threadless stems (need a few, varying clamp sizes) 110-120mm. Prefer -/+ 17 rise (something along the lines of a 3T Arx) condition not especially an issue.
- Nice aero brake levers (Dura Ace level or similar)
- 9/10s clamp-on 28.6 FD
- 26.8 setback seat post (prefer newer 2-bolt variety)
- Shimano SPD-SL pedals
- Road frame in the 48-54cm range
- Nice drop bar ~42cm
- Maybe brifters?
- Bottle cages
- Bar tape
- Other offers...


Have:

- Modolo quill stems, 90mm (black) and 120mm (graphite, new)
- Specialized quill stem, missing wedge and bolt, 120mm
- Dia-Compe aero levers (2 sets)
- Dura Ace 7400 non-aero levers (the early ones)
- rear Shimano 600 tricolor dual pivot caliper
- Shimano Exage dual pivot caliper set (tricolor-like finish)
- LOOK delta pedals; several varieties: red, black, gray (Mavic branded)
- toe clips and straps w/ adapter set that is compatible with LOOK delta pedals
- LOOK delta cleats, all varieties; NEW
- Shimano SPD-R pedals (PD-535), no cleats
- Time Criterium pedals (yellow/blue)
- Time Atac Alium pedals, no cleats
- Wellgo SPD pedals with Bianchi name on them (RC-703; blue), no cleats, but they are SPD compatible
- Bar-end shifter adapter plug kit; (turns DT shifters into bar-ends), Dura Ace level
- Campagnolo C-Record retrofriction (just like Simplex) DT shifters
- Dura Ace cranks arms 180mm (FC-7700)
- Shimano Ultegra double crankset 175mm (FC-6500), nice
- Shimano 105 Octalink cartridge double bottom bracket (BB-5500)
- Ritchey Logic/Sugino drive side crank arm 175mm (square taper)
- Various cartridge/cup and spindle bottom brackets, all English thread
- Shimano 105 9s short cage RD, (RD-5500)
- Shimano 105 10s medium cage RD, (RD-5600), new; take-off
- several Shimano Utegra braze-on FDs, varying condition, double/triple, 6500/6600 series
- Shimano 105 double FD 28.6 clamp-on
- Shimano 105 rear freehub 8-10s, 32h (FH-5501)
- Shimano 600 32h rear freehub, 8-10s
- Mavic tubular front wheel; Mavic 401(?) 28h hub laced to Mavic Mach 2 CD 2 semi-aero rim
- 32h rear Shimano 600 freehub (8-10s) laced to unknown semi-aero tubular rim
- Front aero clincher wheel, cartridge bearing hub, Araya semi-aero hard anodized, laced 28h radial; very light
- Mavic Gl 330 box section tubular rim 32h, almost new
- 27" Mavic Module E clincher rim 36h
- Several Shimano road and mtb cassettes, almost all Ultegra level or higher, most have low miles, 8-10s (mostly 9s), many sizes; large and small, just ask!
- 26.8 x 350mm FSA 2-bolt non-setback seat post, black
- 26.6 Sugino Mighty 2-bolt setback seat post
- Deda Elementi Newton 26 stem: 26.0 clamp, 100mm, -/+ 12 degree rise
- Deda Elementi Magic stem: 31.7 clamp, 120mm, -/+ 12 degree rise
- Ritchey WCS 4-axis stem: 31.8 clamp, 90mm, -/+ 17 degree rise
- Nitto 1" quill threadless stem adapter
- Shimano, Campagnolo, and Ritchey double chain rings; all 53t and 39t double type
- Shimano DT cable stops
- a pair of new Blackburn bottle cages, kind of bluish in color
- a pair of Specialized polished aluminum cages
- King stainless cage

...and a few other things.

http://lh4.ggpht.com/_w4APNEt0JOc/TFhVygYNyhI/AAAAAAAAACA/_ti0iRl3fXc/IMG_0679.JPG

Most of the mtb stuff is Shimano Deore XT, some Deore, some XTR, and some Sram. A lot of the parts are new

http://lh5.ggpht.com/_w4APNEt0JOc/TFhVFKTIDTI/AAAAAAAAABw/RIPTwGZN1T8/IMG_0677.JPG

http://lh4.ggpht.com/_w4APNEt0JOc/TFhUhfoSGPI/AAAAAAAAABQ/ZUe4FbxmmpA/s512/IMG_0667.JPG

http://lh4.ggpht.com/_w4APNEt0JOc/TFhTxQbKBjI/AAAAAAAAABA/V9wi8iZ46vQ/s512/IMG_0666.JPG

Ultegra FDs, 105 RDs, C-Record shifters, bar-end kit, cable stops

http://lh5.ggpht.com/_w4APNEt0JOc/TFhVyjyy0uI/AAAAAAAAAB8/OHojo2c-y6w/s512/IMG_0683.JPG

Shimano 105 (5500) 32h 8-10s freehub and White Industries 32h 8-10s freehub (135mm spacing)

http://lh3.ggpht.com/_w4APNEt0JOc/TFhVyl48ZVI/AAAAAAAAAB4/l4zUxakYDXU/s512/IMG_0684.JPG

Ritchey WCS 90mm -/+ 17 degree 31.8 clamp stem and Felt 42cm ergo bar

http://lh6.ggpht.com/_w4APNEt0JOc/TFhTxFopW2I/AAAAAAAAAA0/Bdcic9Emdzs/IMG_0661.JPG

FSA 26.8 seat post

http://lh5.ggpht.com/_w4APNEt0JOc/TFhTxH4QFxI/AAAAAAAAAA4/elnZTLSKGB0/s512/IMG_0663.JPG



If you have any questions, just ask!

WTT: I have MKS EsQuartz M(edium) toe clips and would like to trade for MKS EsQuartz L(arge) toe clips (or even LL if they made them).

The ones I have are the black/bronze color but silver would be OK as well...

http://www.bikeforums.net/showthread.php?489137-ISO-and-For-Trade-thread-parts-2-and-3.&p=11889440&viewfull=1#post11889440

WANT:

57-62cm lugged touring frame of decent quality - must have canti posts and do 650B if possible. Repaint-worthy candidates definitely considered. No fork needed. Unknown brand? Even better.

HAVE:
Trade bait that you will like.

-Kurt

I need handle bar & stem for 33-34 Schwinn Excelsior. Looks like this:

http://i27.tinypic.com/316u69i.jpg

Lots of parts to trade

WANT:

57-62cm lugged touring frame of decent quality - must have canti posts and do 650B if possible. Repaint-worthy candidates definitely considered. No fork needed. Unknown brand? Even better.

HAVE:
Trade bait that you will like.

-Kurt

Do the canti posts need to be set up for 650B wheels?

Neal

Oddly enough, I am ISO a complete campy Super Record shifter. Just the right one. Somehow I only have a complete left one.

I'm also looking for a few other Super record parts,(seatpost, brake calipers, front D) and a few DA 7400(8s DT shifters, headset) parts.

Have:
campy record track hub, 36h
nuovo record headset, DT shifters (clamp-on), and front derailleur (clamp on)
Super record clamp-on shifter band, no shifters included
2000's Campy chorus rear hub, 9-10-11 speed, 32h
Stronglight Delta headset, this is a roller bearing model.
VERY early campy bar-ends,
8s shimano 600 tricolor shifters
I've also got other goodies, don't hesitate to ask!