Classic & Vintage - ISO and For Trade thread parts 2 and 3.

Have: Clark's of Harrow frameset. London builder, late 1950s. Pic below and more here: http://picasaweb.google.com/lerner.n/ClarkSOfHarrow#

The frameset has a 56cm seat tube (c-t) and a 56 cm top tube (c-c). Chain stays are 17". I think the photos show the condition reasonably well--some chips all around but particularly on the left-side chain stay, but the finish overall is in quite good shape and the lug lining is well preserved. Reynolds 531 db tubing, Simplex rear dropouts. I imagine it was fitted with Cyclo mechs originally.

I'm looking to part with frame, fork, and Campy headset (which has some external pitting, but bearings surfaces are good). I can talk about the other parts hanging on it now if you're interested in something.

Looking for: Motobecane Le Champion frameset from the 70s, 57-61cm seat tube and 55-57cm top tube. Paint condition not important, but no or very few dents, dings, etc.

Neal

http://lh3.ggpht.com/_GmYBBzTzcVQ/TJUIm7iGt0I/AAAAAAAAHvc/ueUFhNJo17Y/s800/ClarksHarrow1.jpg

Henry: highly doubt you'll ever find that in a hardware shop, 7mm bolts are hard enough to find in "normal" length...consider using a bolt from some other stem, one easier to find and cheap to buy (even if you have to buy the whole stem just for the bolt). Worst case you'll have to swap the expander wedge too and maybe ream open the counter sink a tad, but maybe not.

Have: Clark's of Harrow frameset. London builder, late 1950s. Pic below and more here: http://picasaweb.google.com/lerner.n/ClarkSOfHarrow#

The frameset has a 56cm seat tube (c-t) and a 56 cm top tube (c-c). Chain stays are 17". I think the photos show the condition reasonably well--some chips all around but particularly on the left-side chain stay, but the finish overall is in quite good shape and the lug lining is well preserved. Reynolds 531 db tubing, Simplex rear dropouts. I imagine it was fitted with Cyclo mechs originally.

I'm looking to part with frame, fork, and Campy headset (which has some external pitting, but bearings surfaces are good). I can talk about the other parts hanging on it now if you're interested in something.

Looking for: Motobecane Le Champion frameset from the 70s, 57-61cm seat tube and 55-57cm top tube. Paint condition not important, but no or very few dents, dings, etc.

Neal

http://lh3.ggpht.com/_GmYBBzTzcVQ/TJUIm7iGt0I/AAAAAAAAHvc/ueUFhNJo17Y/s800/ClarksHarrow1.jpg


Neal, you do come up with the most interesting frames. Googling "Clark's of Harrow" only comes up with your reference here (http://www.bikeforums.net/showthread.php?657244-Those-of-you-with-huge-bike-collections-let-s-see-them!&p=11020215&viewfull=1#post11020215).

You should get some pictures up on CR website!

Does anyone have a set of Sakae Randonneur bars or a nice 60mm stem?


I might! Email me at noglider@pobox.com

After a look around online I found out the exclusivity of an M7 bolt. McMaster-Carr doesn't even stock a single M7 bolt but someone just pm'd me saying he had a bolt from a cracked Cinelli stem.

After a look around online I found out the exclusivity of an M7 bolt. McMaster-Carr doesn't even stock a single M7 bolt but someone just pm'd me saying he had a bolt from a cracked Cinelli stem.

The problem is that the 'nut' part takes the allen key and is threaded female while the 'bolt' part is press fit and threaded male.

I passed over a cheapo Cinelli at the co-op awhile back over the missing main bolt.

Having said that...It would be easy enough to grab a spare bolt or an entire cheapo stem from a co-op or used place and turn the head down to the small diameter required by the Cinelli.

Has everything stock except tires, bar tape, rear skewer and no pedals (I have the original rat traps but one is broken) wondering if anyone is looking for one of these bikes? Open to almost any reasonable offer from somebody who can at least partially appreciate what a great bike these used to be.

Will post pics soon if I get any PM's, it has some dings and a dent or two but the ride this bike has is incredible for it's model range.

The problem is that the 'nut' part takes the allen key and is threaded female while the 'bolt' part is press fit and threaded male.

you're thinking of a different bolt: he's trying to find the long bolt (135mm) that goes thru the quill to the expander wedge and takes a 7mm Allen at the top (PITA).
AFAIK there's nothing that special about the bolt aside from the 7mm hex hole and the cute little brass washer under the head, but haven't actually taken one out to check on this assumption.
You CAN find 7mm bolts from Fastenal, but these have a 7mm shaft and so not what the poster needs, plus nothing even close to that 135mm length.

you're thinking of a different bolt: he's trying to find the long bolt (135mm) that goes thru the quill to the expander wedge and takes a 7mm Allen at the top (PITA).
AFAIK there's nothing that special about the bolt aside from the 7mm hex hole and the cute little brass washer under the head, but haven't actually taken one out to check on this assumption.
You CAN find 7mm bolts from Fastenal, but these have a 7mm shaft and so not what the poster needs, plus nothing even close to that 135mm length.

oh.....that bolt.

I'm in search of the elusive Cinelli M7x1mm 135mm bolt from a 1A stem. The threads in the expander are good but bolt is junk and finding these from any local or even online Hardware store(McMaster) is like finding hen's teeth. I really don't want to buy an entire stem on eBay for just the bolt and get bent over for it. ThanksPM sent, likely no bending required.

ISO a 26.6mm micro-adjust seatpost. Preferrably fluted, but all I really care is that its micro-adjust <--Found! Thanks Rat Fink.

and/or

F&R set of brake calipers w/ recessed mounting bolts.

trade or sell...whichever.

I've got a set of Suntour Superbe 1st gen Derailleurs i'd love to trade.

Have: 54cm Schwinn SuperSport frame/fork, pink of course. Fairly clean, some paint chips.

ISO: 7 or 8 spd STI or 8 spd ergo levers

I have a orphaned Exage Action areo brake lever. If you have his twin brother, I sure could use it. Don't have much to trade, I could scrape together a little beer money.

http://velobase.com/ViewComponent.aspx?ID=411e2e24-3a27-4e0a-af2f-30d7d96323d9&Enum=118

Have a few things I'm pulling from an '87 Fuji Absolute - not sure if they're all OE or not, but the component dates seem to be.
All are in good to VG shape. This bike doesn't appear to have been ridden much, but I didn't get it complete.
26.0 steel seatpost with clamp.
Sugino crankset w/matching English BB. Alloy arms swaged to steel rings.
Wheelset with 27x1 1/4" alum rims. Front hub is alloy SR q/r, rear is steel KK nutted. Need bearings serviced or adjusted.
Suntour 6s freewheel 14-28 4 prong. Looks virtually unused.
One Dia-Compe N500 brake (nutted rear/would prob. fit recessed front) caliper.
One Dia-Compe non-aero lever, w/extension, right/rear.
Tien Hsin steel headset - marks on top nut. Haven't measured for ISO/JIS yet, assume JIS.
Steel pedals.
85mm alloy stem (no name), currently attached to 39cm c-c Hsin Lung HL steel drop bars.
May have the Avocet Touring saddle as well. Haven't decided.

Need: a few things to complete this build
8 or 9s Shimano/SRAM cassette ~12 to 27
using SunTour bar-cons - or would swap them for indexed bar-ends to match the cassette.
Light alloy 26.0 seatpost (in black preferred)

What kind of brake calipers are you looking for...anything specific, any specific finish, or quality level??? Singles or duals??


ISO a 26.6mm micro-adjust seatpost. Preferrably fluted, but all I really care is that its micro-adjust

and/or

F&R set of brake calipers w/ recessed mounting bolts.

trade or sell...whichever.

I've got a set of Suntour Superbe 1st gen Derailleurs i'd love to trade.

Looking for a CHROME Northroad style moustache handlebar. Everything I can find seems to be alloy, but I need a steel one. Diameter is unimportant, but low price is :) thanks!

ISO a 26.6mm micro-adjust seatpost. Preferrably fluted, but all I really care is that its micro-adjust

and/or

F&R set of brake calipers w/ recessed mounting bolts.

trade or sell...whichever.

I've got a set of Suntour Superbe 1st gen Derailleurs i'd love to trade.

I know there are a bunch of seat posts @ the CO OP you gave your unsold bikes to. I'm going down probably Tuesday so I'll scope it out for 26.6 posts. I know there weren't any decent brakes a month ago, but that changes.

ISO a 26.6mm micro-adjust seatpost. Preferrably fluted, but all I really care is that its micro-adjust

and/or

F&R set of brake calipers w/ recessed mounting bolts.

trade or sell...whichever.

I've got a set of Suntour Superbe 1st gen Derailleurs i'd love to trade.

i've got an SR laprade 26.6 seatpost, microadjust. however, it has pretty bad insertion marks. i also have a pair of shimano 600 F/R calipers w/recessed bolts. the calipers are good, but the original pads are shot.

Update List:

ISO:

* 27" Wolber 58, 36h rim only or mounted to any silver front hub (100mm)(good condition or better)
* 130 BCD Crankset (170mm)(rings not a deal breaker)
* All chrome frame pump to fit 25" frame (~57cm between bottom of TT and BB)
* vintage cantilever brakes (front and rear)

HAVE:

* Suntour Barcons
* ALE Inox toe clips (size small)
* SR Custom stem 22.2/25.4, 100mm reach
* Compe stem 21.15/25.4, 100mm reach (the odd 70s/early 80s Schwinn size stem)
* Shimano 6 sp indexing (or friction) DT shifters (originally matched to Deore derailleurs)
* Dia Compe centerpulls (all hardware, cleaned and lubed, ready to go)(front brake is recessed mount)
* Araya 27 x 1 1/4 rims laced to Sansin hubs (126/100)(36h/36h I think)
* Raleigh branded braze-on mounted (5M) Flikstand
* 1st gen. Suntour Cyclone GT RD in excellent condition save for the missing upper pulley spring (parts RD)
* 26.2mm seatpost (UNO brand, black, single bolt)
* Pound notes, loose change, bad checks, anything

In search of seat post in 26.6mm, Campy preferred.
Have: Campy 27.2mm NR post for trade
http://i25.photobucket.com/albums/c100/toytechthefirst/IMGP2156.jpg

Welcome to rat fink's newly updated list. Please peruse carefully, as options have changed. :)


Have:

PHOTOS HERE (http://picasaweb.google.com/114154731011127333946/Stuff#)

http://lh5.ggpht.com/_w4APNEt0JOc/TFhVEoBWVAI/AAAAAAAAABs/veTR-3DtHRo/IMG_0676.JPG

- Tacx Tao bottle cage (Black/Silver)
- Shimano SPD-SL cleats (the yellow ones, AKA model SM-SH11).
- Dia Compe AGC brake Levers (black)
- Felt 42cm anatomic bend bar (similar to Ritchey Biomax II)
- Cinelli 63-40 bar (without grooves)
- Cinelli 1A stem 100mm
- Suntour Superbe Pro DT shifters
- Suntour Superbe Pro 28.6 FD
- Campagnolo Chorus 1" threaded headset
- Shimano Sora RD
- Modolo quill stem 120mm (graphite, new)
- Specialized quill stem, missing wedge and bolt, 120mm
- Dia-Compe aero levers
- Dura Ace 7400 non-aero levers (the early ones with drillium handles)
- LOOK delta pedals; several varieties: red, black, gray (Mavic branded)
- toe clips and straps w/ adapter set that is compatible with LOOK delta pedals
- LOOK delta cleats, all varieties; NEW
- Shimano SPD-R pedals (PD-535), no cleats
- Time Criterium pedals (yellow/blue)
- Wellgo SPD pedals with Bianchi name on them (RC-703; blue), no cleats, but they are SPD compatible
- Dura Ace cranks arms 172.5mm (FC-7700)
- Shimano Ultegra double crankset 175mm (FC-6500), nice
- Ritchey Logic/Sugino drive side crank arm 175mm (square taper)
- Various cartridge/cup and spindle bottom brackets, all English thread
- Shimano 105 9s short cage RD, (RD-5500)
- Shimano 105 10s medium cage RD, (RD-5600), new; take-off
- Several Shimano Utegra braze-on FDs, varying condition, double/triple, 6500/6600 series
- Shimano 105 double FD 28.6 clamp-on
- Shimano 105 rear freehub 8-10s, 32h (FH-5501)
- 32h rear Shimano 600 freehub (8-10s) laced to unknown semi-aero tubular rim[/COLOR]
- Front aero clincher wheel, cartridge bearing hub, Araya semi-aero hard anodized, laced 28h radial; very light
- Mavic Gl 330 box section tubular rim 32h, almost new
- 27" Mavic Module E clincher rim 36h
- Dia Compe Aero Gran Compe aero levers
- Dia Compe Royal Gran Compe 400 brake set
- Several Shimano and Sram road and mtb cassettes, almost all Ultegra level or higher, most have low miles, 8-10s (mostly 9s), many sizes; large and small, just ask!
- 26.8 x 350mm FSA 2-bolt non-setback seat post, black
- 26.6 Sugino Super Mighty micro-adjust setback seat post
- Deda Elementi Newton 26 stem: 26.0 clamp, 100mm, -/+ 12 degree rise
- Deda Elementi Magic stem: 31.8 clamp, 120mm, -/+ 12 degree rise
- 3T threadless stem: 31.8 clamp, 110mm, -/+ 10 degree rise
- Nitto 1" quill threadless stem adapter
- Shimano, Campagnolo, and Ritchey double chain rings; all 53t and 39t double type
- Shimano DT cable stops
- a pair of new Blackburn bottle cages, kind of bluish in color
- a pair of Specialized polished aluminum cages
- Specialized Rib Cage Pro bottle cage (carbon fiber look)
- (possible) 56cm 1986 Schwinn Peloton frameset w/ Columbus SL tubing, white w/ black chrome stays


Want:

- Shimano Dura Ace 1" threaded headset, or similar quality headset with low stack height
- Specialized Rib Cage Pro bottle cages. Preferably, in the color shown here on the bottom left: http://www.bike24.com/images/products/p045894.jpg (...or Black, or Gray)
- Tacx Tao bottle cage (Black)
- Fizik Arione saddle
- Nice brake cables (Dura Ace, Yokozuna, Nokon)
- Black bar tape
- Integrated 10s brake/shift levers: Sram or Shimano
- Park TS-2 or other high end truing stand
- FRN
- Offers

RatFink did you sell that RockShox fork?

Updated. Much of this list has changed and I now have pics of most of it.

http://lh5.ggpht.com/_w4APNEt0JOc/TFhVEoBWVAI/AAAAAAAAABs/veTR-3DtHRo/IMG_0676.JPG

OK, I'm guessing that your wife was out of the house when you took these pictures. :D

RatFink did you sell that RockShox fork?

Nope. I still have it.


OK, I'm guessing that your wife was out of the house when you took these pictures. :D

Umm, yeah! :) In retrospect, it would have been wise to use a higher contrast backdrop than that.

ISO - rear rack for my Specialized Expedition. Will need to mount on inside of seat stays.

Have - Campy Super Record bits, lots of quill stems, etc.

ISO a 26.6mm micro-adjust seatpost. Preferrably fluted, but all I really care is that its micro-adjust

and/or

F&R set of brake calipers w/ recessed mounting bolts.

trade or sell...whichever.

I've got a set of Suntour Superbe 1st gen Derailleurs i'd love to trade.

I haven't measured it but is that seatpost size used on 80s Schwinn Super Sports? I have one of those floating around as it fits on nothing I bring in.

I haven't measured it but is that seatpost size used on 80s Schwinn Super Sports? I have one of those floating around as it fits on nothing I bring in.

I'm currently working on a 1981 Schwinn Super Sport (Tange Champion) and can confirm that it takes a 26.6mm post. That bike's a candidate for 650B conversion if I've ever seen one.

ISO - rear rack for my Specialized Expedition. Will need to mount on inside of seat stays.

Have - Campy Super Record bits, lots of quill stems, etc.


I have an old Jim Blackburn rear rack. Whats the measurement you need?

RobE30 - thanks for the post. I will measure tonight and let you know.

Mr Rat Fink; what size is the steerer? I assume it is fr 26" wheels (MTB) yes? is the bridge drilled? would this work on a road bike with side pull caliper?


Everyone; OK I am officially searching for a better quality 700c suspension either for canitlever or regular road brakes. 1" long steerer


clearer?

I think she's talking to Rat Fink...

thanks for clearing that up. I also edited my post a bit

apologies to everyone who replied to me...I forgot I posted in this thread :o I need to subscribe to it :o

Much thanks to everyone who PM'd me.

I'm currently working on a 1981 Schwinn Super Sport (Tange Champion) and can confirm that it takes a 26.6mm post. That bike's a candidate for 650B conversion if I've ever seen one.

Cool. I guess I have that size too then.
I'd love to get a Super Sport Columbus frame to ride for a while as I really liked the one I had briefly but it was way too large.

Mr Rat Fink; what size is the steerer? I assume it is fr 26" wheels (MTB) yes? is the bridge drilled? would this work on a road bike with side pull caliper?


Everyone; OK I am officially searching for a better quality 700c suspension either for canitlever or regular road brakes. 1" long steerer


clearer?

Hey BG, I'll throw a wheel in it tonight and see what can be gleaned from the situation.

Have:



6 month old white Turbo saddle - reproduction - one tiny scuff (got an original white one so this is expendable)



Looking for:

Avocet O2 Air saddle (preferrably with titanium rails)


Yellow Turbo saddle

I think I have one of these but it is dark out in the garage now so I will take a photo tomorrow and send it to you.

Nomad, there's a pink '87 SS frame- NOS- on eBay right now. Seller told me he has a 21 in stock as well. Not cheap at around $300 shipped, but if that's what you want...

An update of my "needs" :) :thumb:

Need
====

RX100 7 speed downtube shifters.

http://velobase.com/CompImages/Shifter/8CC4033D-F41F-46B3-A455-070BD2C8B211.jpeg

Nitto model 155 handlebar, 40-42cm.

http://farm3.static.flickr.com/2580/4150174312_7f34a6f7e7.jpg
http://farm3.static.flickr.com/2491/4149414311_4a1837c8bb.jpg

Nashbar red panniers, old style Nashbar logo, not the swoosh.

Have
====

Various Shimano and Suntour bits.

1st Gen Cyclone GT and short cage RDs.
1st Gen Cyclone Shifters on a traditional clamp-on boss (not the hidden band one).
Several Suntour downtube cable stops (dual ones you'd use for barcons for stem shifters, all nice).
Several V-Gt Luxe RDs (KHatfulled, nicely shiny yet "dull", not mirrored).
Biopace and other round Shimano chainrings.
I'd let go one set of NOS white 105 aero lever hoods if that is the required trade bait, although these would be my last choice to let go :) (will fit 105, RX100, and BL-R400 levers)
Possibly a set of Suntour friction barcons (KHatfulled, fresh new rubber covers).
Some Sakae stems in various sizes.
A LONG (like 130mm) Technomic stem (would KHatfull it for fun for you).

Saddle recovering services (not Brooks-style).
Legal tender.

What kind of brake calipers are you looking for...anything specific, any specific finish, or quality level??? Singles or duals??

Dual pivot preferably, but Single is ok as long as its a recessed mounting bolt. As long as they work I'm happy, they don't have to be gems.



I know there are a bunch of seat posts @ the CO OP you gave your unsold bikes to. I'm going down probably Tuesday so I'll scope it out for 26.6 posts. I know there weren't any decent brakes a month ago, but that changes.

Thanks for the offer, I'll take you up on that next time you go if I haven't located anything by then. :)

ISO: Brooks saddle (Pro, B-17), fenders (VO, Bluemel style), Headbadge for a Columbia Rambler, RX-100 dual pivot calipers (specifically the rear), TA crank puller, Stronglight crank puller, decent headset that will work for a '78 Raleigh Comp GS, a D/T clamp on cable guide

Have: various parts off a 72' Sports (green) everything except the frame or fork (fubar'd), Dura Ace 177.5mm (7410) cranks, 57 SA AW hub, 58 SA SW hub, JIM Blackburn rack, NOS RX-100 F/D, Suntour Superbe Pro R/D, Dia Compe Gran Compe aero levers w/ yellow AME hoods, black Nitto dirt drop stem, NOS Raleigh Sports fenders (black, gold striping).... Concour Super Corsa saddle (worn suede but still rideable), C-dale plastic bottle holders (white), C-dale frame pump.... there is more

I'm looking for Shimano SLR brake lever hoods that fit Bl-L331 or 105 BL-1051. Thanks

Nomad, there's a pink '87 SS frame- NOS- on eBay right now. Seller told me he has a 21 in stock as well. Not cheap at around $300 shipped, but if that's what you want...

If this is the guy from New Jersey,he is the one that I thought we were going to be friends but then he stopped all contact and won't return my calls as I had a lot of interest in those frames. I was supposed to pick up a 23" SS from him along with a bunch of other parts( he is friends with some of my friends and is about 20 min from me) but I guess my money was no good or something Weird!
Glenn

Rob is that Blackburn from you randonneur?

Have:

26.6 NR two bolt seatpost
atom 777 french pedals
the chunky white plastic Looks
two sets of Cinelli bars...both have heavy scratching to the logos
dura ace single pivot 7400 calipers
campagnolo GS headset...not sure on year, smooth races
27.2 carbon post, Kuota, with the goofy fin - new and removed from a bike
27.2 carbon Easton post...has scratching and one looks deep...not sure how safe it is or isn't
NOS highend freewheels...a regina, several suntour winner pros
campy clamp on shifters
5 x used freewheels...Suntour winner and a few reginas.

Want:

Campy skewer for front wheel
campy aero post...preferably c-record
quality canti brakes...the more interesting the better

ISO:
Shimano 6500 headset race for the fork crown. This is the model that says "Shimano 600" on the outside, has no ball bearings.
A good headset if I can't find the fork crown race for the 6500 above.
Front 600 tricolor dual pivot caliper.

Have:
White leather Turbo saddle (original). Yes, it's used, or I'd sell it on eBay.
Suntour Sprint front wheel laced to Wolber Super Champion Alpine rim, 36 stainless spokes.
Rear 1055 hub laced 36h stainless to Mavic dark anodized 190 700c rim, little brake wear, if any, with 7-sp freehub.
Suntour Sprint crankset, 170mm, 53/39
Suntour Sprint DT shifters, braze-on, ratcheting.
Suntour Sprint 28.6 FD
Suntour Sprint RD
DC Aero 400 single pivot calipers
Black Nitto quill stem, 95mm
Nitto Olympiade 40cm bars

If this is the guy from New Jersey,he is the one that I thought we were going to be friends but then he stopped all contact and won't return my calls as I had a lot of interest in those frames. I was supposed to pick up a 23" SS from him along with a bunch of other parts( he is friends with some of my friends and is about 20 min from me) but I guess my money was no good or something Weird!
Glenn

is it weird that this hit the local CL like 10 min after I read that post?

http://atlanta.craigslist.org/atl/bik/2004146411.html

ISO, in order of priority:
-cantilever brakes, front and rear
-a non-QR seatpost binder bolt
-locking QR skewers
-a rear rack of some sort, open to options
-old style Selle Italia Flite(s)

Have:
-Modolo Speedy calipers
-Shimano 105 aero levers with black hoods
-Dia Compe AGC white aero levers with white hoods
-Suntour Cyclone front derailer
-Suntour Cyclone downtube shifters
-Shimano 600 Arabesque double cranks, downtube shifters, front and rear derailers, maybe even a hubset too
-3TTT bars and stem
-various mountain bike parts, nothing exotic
-green paper

Rob is that Blackburn from you randonneur?

No, it came on a 73 Comp GS that I picked up @ the T-town show. I thought about putting it on my Randonneur, but I have the stock ones on that and they work fine, so I'll stick with stock:)

Business are you perticular about the color? OH what size? I have a pair of green Alloy w/steel skewer that use a 5mm allen. I don't recal the length but they were too short for my '89 Equinox witha 7spd Deore cassette hub. I'll try and check first thing in the AM

BG, it looks like the the rock shox will take a 700c wheel. Not only that, but the brake bridge is positioned at the right distance for a standard reach caliper brake to align with the rims braking surface. However, the steerer is 1 1/8". Let me know if that works.