Classic & Vintage - ISO and For Trade thread parts 2 and 3.

campagnolo non aero brake levers (1pr or just a single if it matches the ones i have, non drilled levers with campagnolo in a diamondish shape...) i have replacement hoods so condition of them is unimportant to me.

WTB: bar-end shifters (looking for friction). Campy or Suntour? Anyone?

-GG-

Want:

Early 80's double crankset, Sakae Custom, Sugino, Shimano 600, 600EX or Shimano DA in 170-175mm in excellent condition
One Shimano 600 Arabesque self-extracting crank bolt
Campy brazeon shifters, recessed brakes and derailleurs for an '86 Paramount

Have:

Schtuff and $$$ ask me and I might have what you want

badly needing a 26.0 post. got lots of stuff above^
I have an alloy 26.0 post, but that's what it is, a post. it uses the old seat clamp.

Just when I thought my basement was a mess...;):roflmao2::D

http://i10.photobucket.com/albums/a108/upperclasstwit42/DSCN3116.jpg

I parted out my Ciocc that's a few pages back. The starred stuff below has been ridden to work (a 3 mile commute) twice. That's all the use they've seen.

have:
*nitto crystal fellow 65 seatpost, 27.2mm, 250mm length
nitto randonneur handlebars 25.4mm clamp, 45cm width sold
nitto moustache bars, 25.4mm clamp sold
nitto technomic stem, 75mm reach length, 280mm long (longer than many seatposts!)
*brooks b17 black, black rails sold
*campagnolo veloce double crankset, 172.5mm length, 53/39 sold
*campy centaur italian threaded BB sold
*fsa energy caliper brake set w/ kool stop dual-compound shoes
campagnolo victory pedals w/ *nos campagnolo medium/ large size toe clips, *binda-stamped cinelli straps sold
27x1.25" wheelset-- older shimano hubs laced to araya rims
8 speed sachs-huret freewheel (not cassette)
26" rear wheel-- deore xt laced to a mavic rim (don't remember which). spins true.
shimano 105 9-speed rear derailleur. somewhat scuffed. works great.
nashbar interrupter levers (rebranded tektros)
campagnolo front derailleur-- either chorus or croce d'aune sold
campagnolo 1989 chorus rear derailleur sold
campagnolo chorus aero levers (c-record era) sold
the ciocc frame that's a couple pages back.

want:
25.8mm seatpost

looking for: Cinelli model 66 (Campione del Mondo) handlebars:
26.4 clamp size
double cable grooves
42 or 44cm wide

and:
a Cinelli stem for the above: XA, XE, 1A, Grammo, model doesn't matter so long as it's
26.4 clamp and 90-100mm. Let me know what you have.

and:
one pair of brakes:
long-reach
nutted (not recessed bolt)

Thanks!

Up for trade is my 1982 Trek 412 frameset. Seat tube measures 24" (c-t), top tube measures 23" (c-c). Main frame is Ishiwata 022 tubing and takes a 27.2mm seatpost. The fork is not the original and is likely made from hi-ten steel. I had it powdercoated light blue and put on a replacement Trek seat decal and headbadge.

New Ritchey headset is included but no bottom bracket. Pic below is it built up in current form, but I'm looking to move just the frameset. More pics here (http://picasaweb.google.com/lerner.n/1983Trek412#).

I'm looking for a few things: French bits such as Stronglight or TA cranksets, Mafac Competition brakeset, Atom or Lyotard pedals, leather saddles, 700c Super Champion or Rigida rims or wheels, a boxy handlebar bag, a Nitto Technomic stem with fairly short reach (60-80mm), an early Cyclone or Dura Ace derailleur set. Let me know what you got.

Neal

http://lh5.ggpht.com/_GmYBBzTzcVQ/SP388e4qaXI/AAAAAAAACHc/2AjrpgqZvvA/s800/Trek412_2.jpg

Need aero style brake levers

Edit: Thanks, got what I was looking for

anyone interested in a pair of NOS Tioga Psycho-K Skin tires?
looking for track stuff and other ideas

Missing the obvious bolt. Athena, I believe? Anybody have one that's compatible, or a junk derailer?

Trade items in signature link.

http://www.fivenineclimber.com/images/cinelli/athena.jpg

Looking for a Nervar 117 BB spindle and BB cups. The cups are English, but the spindle is French. I've been told a Stronglight spindle or TA spindle would also work. It's from a 76 schwinn Sports Tourer, if that's any help.
http://i318.photobucket.com/albums/mm439/501blue/CIMG2763.jpg

as far as trading, I've got the derailliers from this beast, also the stem shifters, handlebars (drops) and brake levers. I also have a flip flop formula hub.

Have:

NOS Araya Aero 2 polished, unmachined tubular rim, 32h
Selle Italia Flite with titanium rails - older style from the 90's, again well-worn but functional
Shimano Deore XT 32h hubset, rim brake only
Kalloy Laprade seatpost, 25.8x350mm
Thomson Elite seatpost, 26.8x410mm
1971 Triumph 3-speed complete bike
1988 Centurion LeMans, 58cm, complete bike with a Exage Sport/600 component mix
2003 KHS Alite 500 MTB frame, 17" center-to-center, includes brand new replaceable derailleur hanger
Manitou Mars fork - 7.25" steerer length, stem and Cane Creek headset included, but needs to be rebuilt
NOS FSA Moto cranks, 24t/36t/bashguard, external bearing
Shimano 14-28t 6 speed freewheel - GONE
Stronglight 86bcd 48t chainring - GONE
NOS SR 74bcd 34t chainring
NOS unbranded 130bcd 40t chainring
Shimano 130bcd 39t chainring - GONE
Shimano 130bcd 53t chainring - GONE
Suntour Cyclone M-II front derailleur, clamp on
Bianchi celeste water bottle cage
Shimano 105 front brake, BR-1055
Shimano 105 rear brake, BR-1055 (assuming I can get the Ultegra rear listed below!)
Shimano Dura Ace front brake, date code "ZK"
Dia-Compe Power Control 7 flat bar brake levers
Shimano Deore LX brakes, front and rear, BR-M750
Shimano STX RC flat bar brake levers, BL-MC40
Nitto forged "I-beam" style stem, 80mm
Nitto Olympiade 115 bars, ~36cm wide
Schwinn Collegiate owner's manual


Want:

dust caps for SR quill pedals (as seen here on Velo Base - the MKS replacement caps might work, too)
Shimano Ultegra rear brake, BR-6500 or -6600
brown leather saddle - Brooks, Ideale, Wrights, etc.
black leather toe clip straps
SKS Raceblade fenders
touring frameset, ~58cm (I've been tempted to test the touring waters lately...)
7-speed thumb shifter for an old mountain bike

Looking for Ultegra 6503 triple sti shifters

have to trade or ??

Ultegra 600 aero brake leves.....fair amount of use and some scrapes

Almost new (installed and a few rides) Durace 9sp barend shifters

thanks

I've still got a ton of stuff in my signature to trade.

mishap w/car on 2 separate occasions. had the fork realigned but shop couldnt get it 100%. i was amazed they got it as straight as it is though. the second time was the back, its slight and didnt bother taking it in. i give the frame 2 years for one of the lugs to crack but rather not wait and see.

as for the wheel, inferior perhaps as reviews of the MA40 have been mixed, but theyre decent parts and if kept maintained it should serve as a good wheel for years to come... so its open to anyone interested.

I'm in need of one dustcap for a Lyotard Berthet pedal. It's #23 in this catalog page:

http://i108.photobucket.com/albums/n1/intron66/p51Lyotardpedalsonly.jpg

Neal

I'm in need of one dustcap for a Lyotard Berthet pedal. It's #23 in this catalog page:

http://i108.photobucket.com/albums/n1/intron66/p51Lyotardpedalsonly.jpg

Neal
Dustcaps from the 45/45CA also fit the Berthet pedals. In my experience, 45/45CA pedals are fairly abundant and usually quite cheap. (the 45/45CA axles also can replace worn Berthet axles!)

I am looking for an Italian bottom bracket shell for regular sized tubes (Columbus SL to be exact). Do you have a wrecked frame but the BB is still good? Send me a PM. Thanks.

I am looking for an Italian bottom bracket shell for regular sized tubes (Columbus SL to be exact). Do you have a wrecked frame but the BB is still good? Send me a PM. Thanks.http://cgi.ebay.com/De-Rosa-bottom-bracket-tube-lug-steel-ITA_W0QQitemZ220350978942QQihZ012QQcategoryZ56197QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I am looking for a cheap...I mean dirt cheap, pair of spd shoes U.S. size 11.5-12. Please let me know what you have, used with plenty of life is ok with me.

Have some things to trade, or possibly $ if need be.

I am looking for a cheap...I mean dirt cheap, pair of spd shoes U.S. size 11.5-12. Please let me know what you have, used with plenty of life is ok with me.

Have some things to trade, or possibly $ if need be.

SPD as in MTB shoes, or road shoes that accept SPD?

And Shimano actually sold a shoe called the SPD-R, didn't they?

And Shimano actually sold a shoe called the SPD-R, didn't they?

What's funny is, as much as I hate Shimano, I use their road pedals on all of my bikes. I tried to like the Keos, I really did. With my wide-arse foot though (12 EEE), the Ultegra SL pedals just work better for me.

Anyone need some new Looks, or a pair of slightly used Looks? :p

SPD as in MTB shoes, or road shoes that accept SPD?

I actually think the pedals are ultegra road style pedals...so I'd need road shoes.

I actually think the pedals are ultegra road style pedals...so I'd need road shoes.

All Shimano SPD shoes should work on any Shimano SPD pedal. Road/mtn doesnt matter.

I use SPD pedals on all of my bikes. My road bikes have road specific pedals but my 1 pair of shoes are mtn.

I actually think the pedals are ultegra road style pedals...so I'd need road shoes.

I have a pair of those that I don't need. Worn twice.

As long as were talking SPD's.....

WTB: Shimano SPD specific road pedals. I'd like the single sided pedals that accept the small metal cleat.

As long as were talking SPD's.....

WTB: SPD specific road pedals. I'd like the single sided pedals that accept the small metal cleat.

I have some Icons (Trek), I think......

desperately seeking 32 hole Campy C-Record front hub, or Croce level hub.

Marty

want: nitto bullhorns, 25.4 (or 26.0), the flat kind.
have: cinelli stem, 100mm, w/ black "c" logo on front, frame pumps, 26.8 sugino fluted seatpost.

I am looking for a cheap...I mean dirt cheap, pair of spd shoes U.S. size 11.5-12. Please let me know what you have, used with plenty of life is ok with me.

Have some things to trade, or possibly $ if need be.

Can you squeeze into a size 11? I'm not sure if Carnac sizes larger or smaller relative to their noted size number:
http://milwaukee.craigslist.org/bik/998053797.html

This might be a bit of a long shot, but I'm looking to trade this track bike for a decently equipped road bike. I know I won't get much in a modern sense, I don't know if anyone would be interested in trading. Looking for something in the 58-60 range, in nice shape. I don't mind overhauling bearings/cables/etc...just no rust. something italian would be a plus to give my deBernardi some company :)

I have this bike, components are as follows:

57cm bike island frame
new tange threaded headset
new sram chain
Sugino RD crankset/bb w. 48 tooth surly stainless steel chainring
red anodized 32h deep v's-miche track hubs
no name saddle/aluminum seatpost
bars and stem can be switched for a set of black risers i have if you'd like.

the frame is drilled for front and rear brakes, and also has water bottle cage and fender mounts.

http://farm4.static.flickr.com/3385/3225522575_f9984bd5f7.jpg

http://farm4.static.flickr.com/3464/3226378676_c73c0a1f44.jpg

http://farm4.static.flickr.com/3268/3226378870_0cf50c7212.jpg

http://farm4.static.flickr.com/3446/3225523021_d84446688e.jpg

This might be a bit of a long shot, but I'm looking to trade this track bike for a decently equipped road bike. I know I won't get much in a modern sense, I don't know if anyone would be interested in trading. Looking for something in the 58-60 range, in nice shape. I don't mind overhauling bearings/cables/etc...just no rust. something italian would be a plus to give my deBernardi some company :)

....

Where abouts are you located? Shipping costs can be a deal killer sometimes.

i'm in boston. i have a local shop that will ship bikes for under $50 via ups. in that respect, on my side at least, shipping isn't that big of an issue. however i can understand how it might be for someone not as lucky.

i might also mention that i'd very much entertain offers on a nice groupo as well, it might be easier to ship-and i could probably save up for a frame.

So you are looking for the older SPD-R with the weird clears?
http://tbn3.google.com/images?q=tbn:VXsjjej3LQCyAM:http://www.bike-zone.com/photos/2006/tech/features/meares_bt_stealth/img_1623.jpg
http://tbn3.google.com/images?q=tbn:87OTd3tgLWo3zM:http://www.wiggle.co.uk/images/shimano%2520sh91.jpg

I'm looking for the first gen SPD road pedals....the ones they had before the switch to SPD SL's. The ones I want take the same cleat as the current mountain pedals.


Like these:

http://www.bikepro.com/products/pedals/pedal_jpg/m1mm_6500_spd_top.jpg

i'm in boston. i have a local shop that will ship bikes for under $50 via ups. in that respect, on my side at least, shipping isn't that big of an issue. however i can understand how it might be for someone not as lucky.

i might also mention that i'd very much entertain offers on a nice groupo as well, it might be easier to ship-and i could probably save up for a frame.
PM sent.

Have: 23" 1988 Schwinn World Sport - mostly stock, in decent shape. PM for details.

Want: 21" or smaller women's road bike/frame. Mixte preferred.

NYC

Hunting for (edited):

* 110 bcd vintage double crankset, 172.5-177.5 arms. 50T-34T best, but really any teeth, even no rings.

* British threaded 111mm BB to fit Campy square taper.

* Silver 700 clincher rims, 36h, non hardened, classic box cross section.

* Friction bar end shifters, SunTour preferred.

* Randonneur bars, wider better, 25.4mm sleeve.

* Mafac Racers in good condition

* Any clincher wheel set, silver 700 rims, 126mm rear, for freewheel. Points for Suntour or Mavic SSC hubs.
Obscure high flange even better.

Trade items in signature. Also $. Thanks for looking!

Jan

And Shimano actually sold a shoe called the SPD-R, didn't they?

Pedals too. I have a pair of them that I have absolutely no use for.

Have:

Shimano SPD-R Pedals. A bit worn and dirty, but they spin nicely. I'll never use them.
Shimano SLR aero brake levers with white hoods. Excellent condition and the hoods cleaned up to just a couple shades short of their original white.
144 BCD chainrings of assorted sizes. Some Campagnolo, some Sugino. All used, but all still usable.
Campagnolo 980 front derailleur - very nice condition.
Some 6 speed freewheels - mostly SunTour and Shimano.
A few other odds & ends.

Want:

To tell the world how great C&V Forum members are. :)
Decent quality black or dark grey brake calipers with minimal scratches - recessed bolt, medium reach.
SunTour V, Compe V, or other lightweight early 70's SunTour FD with non-rusting/oxidizing cage.
SunTour V, or VX, or other lightweight early 70's medium cage RD that's mechanically sound without oxidation on the cage.
Short stack alloy headset

Pedals too. I have a pair of them that I have absolutely no use for.

Have:

Shimano SPD-R Pedals. A bit worn and dirty, but they spin nicely. I'll never use them.
Shimano SLR aero brake levers with white hoods. Excellent condition and the hoods cleaned up to just a couple shades short of their original white.
144 BCD chainrings of assorted sizes. Some Campagnolo, some Sugino. All used, but all still usable.
Campagnolo 980 front derailleur - very nice condition.
Some 6 speed freewheels - mostly SunTour and Shimano.
A few other odds & ends.

Want:

Decent quality black or dark grey brake calipers with minimal scratches - recessed bolt, medium reach.
SunTour V, Compe V, or other lightweight early 70's SunTour FD with non-rusting/oxidizing cage.
SunTour V, or VX, or other lightweight early 70's medium cage RD that's mechanically sound without oxidation on the cage.
PM sent on the calipers.

I'm looking for the first gen SPD road pedals....the ones they had before the switch to SPD SL's. The ones I want take the same cleat as the current mountain pedals.


Like these:

http://www.bikepro.com/products/pedals/pedal_jpg/m1mm_6500_spd_top.jpg

I have a pair that I might be tempted to part with...switched over to double sided SPD's on my Riv

Pete

WTB- Lugged steel touring frame 56/7mm. Basically looking for a LHT alternative in the C&V style. Price range similar to LHT($400-500). Canti brakes and low rider mounts preferred, but not a deal breaker. Thanks

I'm looking for a 1" quill stem that is hinged at the clamp so that I can change bars by removing one bolt. The reach should be 70-80mm. I know that 3TTT made some in the '90s called Evol. There must be others.

I have a pair that I might be tempted to part with...switched over to double sided SPD's on my Riv

Pete

Get back at me when you get a chance..... PM or email me... jim2527@hotmail.com

ISO one (1) cotter nut for my Raleigh

just like this bad boy http://cgi.ebay.com.sg/Vintage-Raleigh-Cotter-Pin-Nut-3-8-thread-NOS-Genuine_W0QQitemZ260353076057QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item260353076057&_trksid=p3286.m63.l1177 (http://cgi.ebay.com.sg/Vintage-Raleigh-Cotter-Pin-Nut-3-8-thread-NOS-Genuine_W0QQitemZ260353076057QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item260353076057&_trksid=p3286.m63.l1177)

...except not $60

ISO one (1) cotter nut for my Raleigh

just like this bad boy http://cgi.ebay.com.sg/Vintage-Raleigh-Cotter-Pin-Nut-3-8-thread-NOS-Genuine_W0QQitemZ260353076057QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item260353076057&_trksid=p3286.m63.l1177 (http://cgi.ebay.com.sg/Vintage-Raleigh-Cotter-Pin-Nut-3-8-thread-NOS-Genuine_W0QQitemZ260353076057QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item260353076057&_trksid=p3286.m63.l1177)

...except not $60

That is highway robbery.....

Nothing C&V comes close to the LHT in terms of design for loaded touring. If you're willing to pay that much why go with a sub-par machine? Just for lugs? not worth it.

Is this the unsolicited advice thread or WTB?

I was about say one word, and one number. Miyata 1000:D,,,,BD


http://www-hsc.usc.edu/~rpinder/miyata.html