Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.DB2K4
04-03-04, 03:12 AM
Hi guys, 1st time posting here.
Anyway, did a bit of research on the net, and found nothing about this olddie. I want to install it onto a 2002 DiamondBack Skindog which already have a screwed up Gyro on it, so I'm going to take it off and install the X-UFO instead. I understand this rotor is quite old thats y i'm not quite too sure if it'll fit.
I've measured the upper cable stop hole and it is 25mm across, which is 1". I think the Skindog is a 1-1/8", will I be able to modify the uppercable stop, eg, grind the hole a bit bigger so that I can fit it? Are there any other parts I will need to modify?? Thanx
Anyway, did a bit of research on the net, and found nothing about this olddie. I want to install it onto a 2002 DiamondBack Skindog which already have a screwed up Gyro on it, so I'm going to take it off and install the X-UFO instead. I understand this rotor is quite old thats y i'm not quite too sure if it'll fit.
I've measured the upper cable stop hole and it is 25mm across, which is 1". I think the Skindog is a 1-1/8", will I be able to modify the uppercable stop, eg, grind the hole a bit bigger so that I can fit it? Are there any other parts I will need to modify?? Thanx