Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.marxspiro
12-03-08, 03:43 PM
Hi Everyone,
I'm building some aluminum forks using the crown from my old Judy Rock Shox. I've already investment cast the dropout lugs so I'm pretty fixed on an OD of 1" for the stanchions. What would be a good thickness for the tubing? I'm planning on using 6061 Aluminum because that's what the crown and dropouts are. Thanx.
I'm building some aluminum forks using the crown from my old Judy Rock Shox. I've already investment cast the dropout lugs so I'm pretty fixed on an OD of 1" for the stanchions. What would be a good thickness for the tubing? I'm planning on using 6061 Aluminum because that's what the crown and dropouts are. Thanx.