Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.jnvw
12-03-08, 06:37 PM
Bianchi Frame and Fork. Columbus Tubing. Gipiemme dropouts!
Columbus Steel!!!
True Italian Built Bianchi!
Rear spacing is 130mm.
Up for your consideration is a vintage Bianchi Road Bike Frame and Fork!
The model is assumed as a Campione but could be another very similar model.
Bike is measured as a 57cm or (22-1/4") measured center to center bottom bracket and 58cm (22-1/2") top tube measured center to center.
Both front and rear dropouts are stamped, Gipiemme!
Bottom bracket is Italian meaning both cups have a right handed thread. English Bottom Brackets have right handed thread non-drive side and left handed thread on the drive side.
The bottom bracket is threaded 36 mm x 24 TPI with the shell a 70mm. (Please note the bottom bracket may not be included in this sale)
Currently Ofmega cups are installed in the headset, again along with the bottom bracket, the headset may not be included in this sale.
Frame and fork are straight with no damage other than nicks and scratches. I was going to powder coat this frame and fork and build it up for my g-friend but the frame is simply too large for her.
Price is $175 + shipping or make reasonable offer!
Columbus Steel!!!
True Italian Built Bianchi!
Rear spacing is 130mm.
Up for your consideration is a vintage Bianchi Road Bike Frame and Fork!
The model is assumed as a Campione but could be another very similar model.
Bike is measured as a 57cm or (22-1/4") measured center to center bottom bracket and 58cm (22-1/2") top tube measured center to center.
Both front and rear dropouts are stamped, Gipiemme!
Bottom bracket is Italian meaning both cups have a right handed thread. English Bottom Brackets have right handed thread non-drive side and left handed thread on the drive side.
The bottom bracket is threaded 36 mm x 24 TPI with the shell a 70mm. (Please note the bottom bracket may not be included in this sale)
Currently Ofmega cups are installed in the headset, again along with the bottom bracket, the headset may not be included in this sale.
Frame and fork are straight with no damage other than nicks and scratches. I was going to powder coat this frame and fork and build it up for my g-friend but the frame is simply too large for her.
Price is $175 + shipping or make reasonable offer!