Bicycle Mechanics - Help! Fox Float 100 RLC
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
12-20-08, 04:39 PM
I can not remove the lower nut on the air spring side of my Float 100rlc I am trying to service this this thing. The nut just spins, I have the top caps removed and the RLC side removed. Any tricks? Thanks.
12-20-08, 05:18 PM
I know exactly what you're experiencing, having had the same problem in the shop with servicing fox forks. What I found works is to let the air out of the chamber, unscrew the top cap, and lean the piston to the side as far as you can, so the piston sits at an angle. Now hold the piston there while you unscrew. I've found this to be more of a problem on reassembly, BTW.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.