draggingcanoe
12-29-08, 08:26 AM
My wife has an old Hardrock Mountain bike with a rigid fork. Are there any sources for shocks for the older models?
Mountain Biking - Old fork to shock?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Old fork to shock?
S.D.XC
12-29-08, 08:39 AM
From what i know...i think it's not a old or new issue...
It's whether it's a standard 1 1/8" headtube...
Which year is it from?
It's whether it's a standard 1 1/8" headtube...
Which year is it from?
frankenmike
12-29-08, 04:44 PM
Cost of locating and installing decent fork: 250-300. Cost of new hardrock with decent fork: 250-300. (Slightly exaggerated but you get the idea).
S.D.XC
12-30-08, 05:48 AM
Cost of locating and installing decent fork: 250-300. Cost of new hardrock with decent fork: 250-300. (Slightly exaggerated but you get the idea).
Agree.
Agree.
roccobike
12-30-08, 06:53 AM
I've made the change you're asking about. I was lucky enough to find a NOS Duo-Track fork ( a mid-level fork) from the mid-90's with the elastomers still in excellent condition. It had the right type of steerer (1" threaded) and the thread length and position was a perfect fit for my bike. (This is almost as hard to find as hitting the lottery). I work on bikes for a hobby so I installed it myself, no bike shop expenses. My total cost was only $50.
The final results were less than expected. The old bike was designed for a rigid fork and the new fork changed the geometry substantially. With the suspension fork the bike handled logs and rough terrain much better than before. BUT, the bike had no stability. When cornering, the bike needed a wider path, when climbing, if I hit a stall, the bike wanted to fall down.
So even if you manage to make this change on a budget, don't expect it to be anywhere near a new low end bike from an LBS.
The final results were less than expected. The old bike was designed for a rigid fork and the new fork changed the geometry substantially. With the suspension fork the bike handled logs and rough terrain much better than before. BUT, the bike had no stability. When cornering, the bike needed a wider path, when climbing, if I hit a stall, the bike wanted to fall down.
So even if you manage to make this change on a budget, don't expect it to be anywhere near a new low end bike from an LBS.