Electronics, Lighting, & Gadgets - Zebralight H30 as helmet light ?

Hi all,

Since this place always brings good advice I wanted to ask a question.
I have been using a handlebar mounted Fenix Pd3 Q5 for a few months now. As excellent as this light may be, I would like to get a second light source on my helmet.
Now, I cam across the Zebralight H30 wwhich seems like a very light, very small and interesting light. Has anyone had any experience with this light? What do you think of it?

Any advice is welcome. Thanks in advance.

The H30 would be a good choice for a helmet light..Here is a review of the H30.. I use one for running and it is superlight.. You could easily use velcro straps to attach to a helmet..

http://www.light-reviews.com/zebralight_h30/
http://www.candlepowerforums.com/vb/showthread.php?t=194427

I personally would look at the H60 which uses 18650 batteries, but you can get 4 hour of burn time in high mode of 110 lumens.. The max mode of 190 lumens has a 10 minute timer that reverts to the 110 lumen mode.

see more info at: http://www.zebralight.com

Thank you very much socalrider. I was thinking more about the H30 because I already have CR123 batteries and the needed charger.

you can use standard 123's or rcr123's.. You get about 90 minutes with rechargeables.. The Battery Station and AW rechargeables fit the best.. The Trustfire and Ultrafire are a little tight.. If you use primaries you can 2.5 hours on high mode..

Thanks a lot.
Since you seem to know this light quite well, do you know if I can easily fit the clamp on my helmet without the headband or if I'll to find another solution?

edit: oops...I had not seen your velcro recommandation...my bad.

If you have a local REI, they sell 12 and 18 inch velcro straps.. They cost about 3.00 each.. I would get one of each size and through trial and error you will find which one works the best.. They keep the velcro straps in the bike accessories department..