BMX - rear wheel help

so i built up a Fit Dak frame the other day, mostly with parts that i had from previous bikes. the only problem is that the rear wheel i put on it (eastern 9er) is too small...it seems like this wouldnt be a huge problem but it throws off my chainline A LOT...any suggestions? any rear wheels that will fit my frame?


edit: and i have already tried respacing my cranks...the chainline is still off

Do you have pics of your chainline from the rear toward the front and of your set up?

Pics would be good. Are you running a generic chain or those interlock chains?

just a generic sram pc-1. ill get pics up asap

http://img178.imageshack.us/img178/1586/dsc07624zk0.jpghttp://img206.imageshack.us/img206/2694/dsc07625tq3.jpghttp://img118.imageshack.us/img118/1517/dsc07627ms7.jpg

Get a half link.

Chainline looks good.

trust me, its not...its just not the best photograph of it. the chainwheel is further to the right than the driver. Someone suggested maybe i should put a few extra washers on the wheels axle. would this help?

Take out some washers where the sprocket is.

theres only one left, like i said before, i have adjusted the cranks as much as possible

Is it possible the spindle's on backwards?

After looking at the picture again, it strikes me odd that there are two spacers on the left and one on the driveside. The spindles where the surface area for the cranks are spaced differently.

theres only one left, like i said before, i have adjusted the cranks as much as possible

Buy thinner ones. And to answer your next question, they are located at your local hardware store. Does your chain fall off when you pedal? Or is this some OCD thing?

ill try that fuzzbox, the chain falls off if im really pedally hard