Bicycle Mechanics - Servicing Dura Ace front hub
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
01-28-09, 07:15 PM
I have a front wheel with a Dura Ace hub in the 7400 series days. It has the plastic dust or bearing covers on the sides with the 'open' and 'close' markings. What's the scoop on these. I can rotate it to the 'open' position but I can't get the cover off. I assume if I can get it off I can get to the bearings to add some grease.
01-28-09, 07:29 PM
I have those hubs, too. The "Open" position opens a little hole to add more grease w/o taking the dust covers off. I don't think I've ever actually done that with mine as I typically do a complete overhaul and replace the balls which requires taking the axle out. With the axle out, the dust covers can be pryed out with a screw driver, but there's usually not a need to take them out.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.