Bicycle Mechanics - Hub overhaul (front wheel)

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Hub overhaul (front wheel)

pringle
04-29-04, 01:24 PM
I'm looking to overhaul the hub on my front wheel. Where would be a good place to pickup a new cone, dust cap, ball bearings? (Granted that they need to be replaced) Any suggestions on the type of grease to pack them with? Also, whats the best way to determine the size of the balls? I know the typical size for front hubs are 3/16"...

Thanks.

Avalanche325
04-29-04, 03:38 PM
Youe LBS should have the balls and cones. I like Park grease. You can get a small tube, or a tub (lifetime supply) at the LBS also.
halfspeed
04-29-04, 05:29 PM
I'm looking to overhaul the hub on my front wheel. Where would be a good place to pickup a new cone, dust cap, ball bearings? (Granted that they need to be replaced) Any suggestions on the type of grease to pack them with? Also, whats the best way to determine the size of the balls? I know the typical size for front hubs are 3/16"...

Thanks.

I'd pass on bicycle specific grease. You're better off with green marine grease or Slick 50. Sometimes the ball bearings at the bike shop aren't the highest quality either. It depends on the shop. http://www.biketoolsetc.com/ is a good online source of parts and tools.