Bicycle Mechanics - Help ID'ing this fork..

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Help ID'ing this fork..

brandenjs
02-12-09, 02:43 PM
Does anyone know what this fork may have come off of. It is cro-moly 1 1/8" threadless, 390mm from crown to axle, 230mm steerer and as far as I know it is for a 700c wheel. It has a recessed caliper mount hole so I know it is fairly new. Any help would be appreciated...

http://i225.photobucket.com/albums/dd262/cavedad66/Forks/100_4396.jpg
http://i225.photobucket.com/albums/dd262/cavedad66/Forks/100_4399.jpg

jsharr
02-12-09, 02:50 PM
Nothing to go on other than first impressions here, but that looks like it came off a low end bike, mainly saying this due to the way the drop outs appeared to be stamped.
frankenmike
02-12-09, 04:00 PM
The color combo reminds me of a trek for some reason..

brandenjs
02-12-09, 10:24 PM
That's what I was thinking. I got a bunch of forks and there were 2 other Trek forks in the bunch,but this one doesn't have thing on it to tell..Thanks..
griftereck
02-13-09, 09:37 AM
hey I got a bunch of new suspension forks from ebay a while ago
just low end stuff. think there was 10 forks
I fitted a pair to a MTB and sold that for more than the fork, postage and mtb cost me. :)