Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.roadnoob412
02-12-09, 03:26 PM
Hi all,
So last year I bought a set of Profile Aerobars - the one continuous piece unit that makes a loop out and back from the handlebars. I love it. I've seen a few folks on rides with a water bottle wedged in between the aerobars like it was designed for it, so I did a little research, and sure enough, Profile makes a water bottle specific for their aerobars. When I read some more about this, I realized that it has an open hole on top covered with a 'sponge' for quick filling - obviously this is geared for triathletes. I'm no triathlete, but I do like to spend a good bit of time hammering away on my aerobars. Does anyone know if there's anything out there that would work as a good 'cap' for this e-z fill hole other than a sponge?
Thanks in advance! Sorry to ramble on...
TB
So last year I bought a set of Profile Aerobars - the one continuous piece unit that makes a loop out and back from the handlebars. I love it. I've seen a few folks on rides with a water bottle wedged in between the aerobars like it was designed for it, so I did a little research, and sure enough, Profile makes a water bottle specific for their aerobars. When I read some more about this, I realized that it has an open hole on top covered with a 'sponge' for quick filling - obviously this is geared for triathletes. I'm no triathlete, but I do like to spend a good bit of time hammering away on my aerobars. Does anyone know if there's anything out there that would work as a good 'cap' for this e-z fill hole other than a sponge?
Thanks in advance! Sorry to ramble on...
TB