Folding Bikes - Downtube NS - Replacement chainguard?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA
JugglerDave
02-20-09, 09:51 AM
The plastic front chainguard on my 2007 Downtube NS just shattered this morning in the cold (at the plastic screw-together points).

Has anyone found a suitable replacement? I am more concerned about keeping the chain up when it falls off the sprockets than about protecting pants.

I found a page that lists all sort of "bash rings and guards" but doesn't seem like any but the Kool Stop will fit the 48T front ring.
http://www.bikeparts.com/productsearch.asp?categoryName=Bash%A0Rings%A0and%A0Guards&selCategory=1342&categoryID=1342


Suggestions???

ShinyBiker
02-20-09, 10:09 PM
I was never able to find a metal guard to replace the plastic one that also shattered on my Dahon. I ended up doing a long chainguard that was primarily for keeping my pants clean.

I would suggest you try Thor from ThorUSA. He may have posted here that he had some in stock for Dahons.
kaseyem
02-21-09, 05:29 AM
I took mine off right after I bought my bike. I changed size. I think it is around somewhere if you just want a replacement.

JosephLMonti
02-21-09, 06:46 AM
I would contact Downtube Bicycles directly...I think all their derailleur bikes have a 48T chainring, hence the same chainring guard. They must have an extra guard around that they could sell/give you.

Also check out the roller kits from www.gaerlan.com (http://www.gaerlan.com)