Singlespeed & Fixed Gear - cheap track bike

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




View Full Version : cheap track bike


skid on me
02-27-09, 10:08 AM
and yeas people i searched the forum for a thread that would help me, and i wasnt able to find anything. so can anyone tell me an alright site that sells a cheap track bike $400 - $500. and so thats its still a decent bike. remind you guys, i live in canada. and i have visited bikedirect.com, and they currently cant accept foreign credit cards. so im trying to find another good site.
this would be greatly appreciated.

-skid on me


teiaperigosa
02-27-09, 10:25 AM
I wouldn't go the cheap route if I were you

if you want a cheap bike, go to kmart

if anything, invest in a quality rear wheel and throw it on a POS road bike with 'horizontal' dropouts...this is called a conversion

a QUALITY rear wheel will run you anywhere from 200-400....better if you build it yourself

from there...upgrade little by little

Yaktizzle417
02-27-09, 10:25 AM
Republicbike.com seems to be pretty nice?


skid on me
02-27-09, 10:28 AM
i was reading up on republic bike and it says that there made of terrible material, and isnt that strong. and i was thinking about building it up myself, but it would cost like $700

teiaperigosa
02-27-09, 10:29 AM
oh, and if you don't have the time, energy, and/or resourcefulness to go the conversion route

then..yea...just buy a complete track bike...but...if you have the money to put down on something 'cheap' (high depreciation of value, low quality), then you should just buy something non-cheap

you'll end up paying more for 'cheap'...trust

teiaperigosa
02-27-09, 10:32 AM
steel IRO start from 650

that's about as cheap as I'd go

jholland
02-27-09, 10:48 AM
This bike started out at like 209+39 shipping.. little by little have upgraded most everything but the frame.. I think I am up to like 500 now, with a brooks saddle and other campy parts.. but had a rideable bike the whole time..

http://farm4.static.flickr.com/3539/3313707769_a81d0f58a7.jpg

dayvan cowboy
02-27-09, 10:49 AM
do they have performance bike up in canada? or does it ship there? they've got a bunch of cheap single speeds.

dayvan cowboy
02-27-09, 10:49 AM
This bike started out at like 209+39 shipping.. little by little have upgraded most everything but the frame.. I think I am up to like 500 now, with a brooks saddle and other campy parts.. but had a rideable bike the whole time..

http://farm4.static.flickr.com/3539/3313707769_a81d0f58a7.jpg

are your handlebars a broomstick?

jholland
02-27-09, 10:53 AM
no, someone stole my bars I was using, and the wooden bars are somewhat temporary, I just haven't found anything else I like. I cut a branch off of a tree in the back yard and stripped the bark off and cut it to size... I didn't buy them.

Phrenetis
02-27-09, 11:00 AM
no, someone stole my bars I was using, and the wooden bars are somewhat temporary, I just haven't found anything else I like. I cut a branch off of a tree in the back yard and stripped the bark off and cut it to size... I didn't buy them.

holy
****

Meepers
02-27-09, 11:04 AM
get a penn pal in the states and paypal them cash to buy you a BD bike, then ship it to you when it comes in. it will cost a few bucks, but you can get a BD for like $350, then probably another $50-$60 to get to canada.

bigvegan
02-27-09, 11:50 AM
+1 Get somebody in the states to pick it up and re-ship it.

Or, since the bike you want is most probably the Mercier Kilo TT, as it's the best track bike in your price range, send a question to
questions@cyclesmercier.com and see if there's any way you can purchase the bike in Canada.

If you know what size you need and have basic wrenching skills, there's no reason to pay another couple hundred to the LBS for branding and assembly.

nelzar13
02-27-09, 12:13 PM
are your handlebars a broomstick?

Holy ****! hope you aren't doing to much standing up and cranking hard going up hill!
very nice (rigging*) though !

BRMC
02-27-09, 12:28 PM
I cut a branch off of a tree in the back yard and stripped the bark off and cut it to size... I didn't buy them.

that tree branch handle bar setup must look *****in with your brooks...

captnfantastic
02-27-09, 12:53 PM
http://www.bikesdirect.com/products/trackbikes.htm

dayvan cowboy
02-27-09, 01:02 PM
http://www.bikesdirect.com/products/trackbikes.htm

someone didn't read the OP.

skid on me
02-27-09, 03:38 PM
get a penn pal in the states and paypal them cash to buy you a BD bike, then ship it to you when it comes in. it will cost a few bucks, but you can get a BD for like $350, then probably another $50-$60 to get to canada.

i dont know anyone in the states. and this has crossed my mind haha

skid on me
02-27-09, 03:39 PM
steel IRO start from 650

that's about as cheap as I'd go

i was gunna do this
but the mark v would be almost a grand with shipping

captnfantastic
02-27-09, 05:01 PM
someone didn't read the OP.

truth!

captnfantastic
02-27-09, 05:02 PM
http://www.rscycle.com/Bikes/Track-Bikes

skid on me
03-01-09, 02:44 PM
thanks d00d

Catnap
03-02-09, 12:40 PM
Nashbar has a fixed gear for $400, i think they might take a canadian CC as well. so does Performance bike. i don't think the OP has really done any googling...

skid on me
03-02-09, 01:14 PM
i google like theres no tomorrow
and that bike on nashbar is ight
but i have my heart set on that augusta bike on rscycle.com

MadBuddha1
03-02-09, 01:20 PM
you could buy a used Bianchi Pista for $450 easy, forget what people say about them, they are really great entry level steel bikes and have awesome geometry that is as comfortable as it is aggressive, look into it

Meepers
03-02-09, 01:26 PM
i dont know anyone in the states. and this has crossed my mind haha


i would be willing to help you out. i am not going to take a loss at all, nore will i look to make money off of you. just the exact amount of money i would pay if i buy the bike and ship it to you. i would definitely want the money to order it before i put a bike on my credit card. and you can send the shipping charges later (i could find out exactly how much it would cost to ship it to you then let you know how much to send) i would ship fed ex, i can ship from my part time job. ground would be the cheapest for you, obviously. i am not sure about international, but it cost me $28 ($27.7X) to ship a 29 lbs(13.1541787 +kg) complete bike from Pennsylvania to California. i know it may sound shady, but if you are interested in some help PM me. you can feel it out if you want to. if you want to get an idea of shipping it would ship from US Postal Code 18704.

Yellowbeard
03-02-09, 01:50 PM
no, someone stole my bars I was using, and the wooden bars are somewhat temporary, I just haven't found anything else I like. I cut a branch off of a tree in the back yard and stripped the bark off and cut it to size... I didn't buy them.

Haha, what's the clamp diameter? I hope you used the proper shim!

jet sanchEz
03-02-09, 02:21 PM
Where in Canada are you? Pinkbike.com and CanadianCyclist.com have classifieds sections with most of the listings being in Canuckistan...

7daysaweek
03-02-09, 02:33 PM
I commute daily on a 2007 fuji track. Found it used for $350 and I've spent less than $100 on it since. New bars, clipless pedals I already had, new seat off my brother's bike when he got a Brooks for Christmas, and a new chain. I love it. I've seen a few of them out there for cheap... not sure about Canada but worth looking. Good luck!

PedallingATX
03-02-09, 06:47 PM
There are a lot of routes you could go if you want a cheap fixie. I did a conversion just recently. I bought a '70s Bianchi road bike $140, slapped a mut headset on it, got a Shimano cartridge bottom bracket $25, old handlebars, a sweet old san marco seat $20, weinmann Black Deep V $150, took apart an old road bike crank to make it single, you get the idea. In total, it cost me about $450 and it is way nice. When i get some extra money I will put a Chris King headset on it, but other than that it is a great bike. Definitely do a conversion.

P.S. mine still has braze-ons from the shifters and brake cables, etc. This doesn't bother me, but if you do a cheap conversion, you might have to deal with that unless you wanna sand them off

martinus
03-02-09, 07:26 PM
no, someone stole my bars I was using, and the wooden bars are somewhat temporary, I just haven't found anything else I like. I cut a branch off of a tree in the back yard and stripped the bark off and cut it to size... I didn't buy them.

LOL, soon as someone denys something, even BEFORE anyone ever accused them of anything, is purdy much a confesion ...


.
.
.

straitballin22
03-02-09, 10:37 PM
you could buy a used Bianchi Pista for $450 easy, forget what people say about them, they are really great entry level steel bikes and have awesome geometry that is as comfortable as it is aggressive, look into it


Where can one get a used pista for 450? I have been looking. I really want a chrome one in stock condition, and I am having a lot of trouble finding it.

skid on me
03-02-09, 11:15 PM
i think the pista is nice
but im not a fan of all chrome

anemptygun
03-11-09, 12:28 PM
Toronto Craiglist?

http://toronto.en.craigslist.ca/

Gyler McDougal
03-11-09, 05:52 PM
i would at least would go 800 if i were you unless the guy who buys it from you knows what hes talking about when it comes to bikes